Photoinduced phase transitions

Employing actinic light to alter/stabilise a particular thermodynamic phase via the photo-isomerisation of the constituent molecules is an interesting tool to investigate soft matter from a new dimension. This article focuses on our recent results on several aspects of these non-equilibrium phase transitions, which are isothermal in nature. We specifically discuss (i) the influence of different parameters, such as confinement, applied electric field, pressure etc., on the dynamics associated with both the photochemical transition driving the equilibrium nematic to the non-equilibrium isotropic phase and the thermal back relaxation recovering the nematic phase, (ii) unique light-driven disorder–order transition in a reentrant system, (iii) dynamic self-assembly of the smectic A phase, which is stabilised only in the presence of actinic light, (iv) novel temperature-intensity phase diagrams and an example of primary and secondary photo-ferroelectric effects in an antiferroelectric smectic C system. These results highlight the fact that the actinic light can be used as a new tool to study phase transitions and the associated critical phenomena that could also bring about effects that are not seen in equilibrium situations.     

The effect of terminal chain modifications on the mesomorphic properties of 4,4′-disubstituted diphenyldiacetylenes

The typical sidewalls produced in the fabrication of protrusion electrodes are proposed to create a low voltage (4.5 V_rms) and high transmittance (93%) blue-phase liquid crystal display (BP-LCD). The tilted electrodes produce a strong horizontal electrical field that reduces the operating voltage considerably. The common problem of the ‘dead zones’ is solved by reflecting the light onto the electrodes. In order to estimate the phase retardation of the reflected light, a ray tracing simulation program for anisotropic mediums has been developed. The proposed device is more competitive than vertical field switching based BP-LCD and also, has the advantages of protruded in-plane-switching structures. These facts make this technology a potential candidate for the next generation of BP-LCDs.     

Synthesis,mesogenic and dielectric properties of fluorosubstituted isothiocyanatoterphenyls

The synthesis, mesomorphic and physical properties of 14 homologous series of laterally fluorinated 4?-alkyl-4-isothiocyanatoterphenyls were described. Influence of the number of fluorine atoms and their position in the terphenyl core on the phase transition temperatures, nematic range, dielectric and optic anisotropy as well as bulk viscosity were discussed. The compounds with the most optimal properties for formulation of nematic mixtures were selected, and mixture examples with low viscosity and medium or high birefringence were presented.     

Alignment of liquid crystals induced by a photopolymerized self‐assembled film

An alignment film derived from a photopolymerized self‐assembled film may be used to orient nematic liquid crystals after irradiating the film with linearly polarized UV (LPUV). A photosensitive cationic amphiphile was first synthesized containing two double bonds and which could be polymerized by UV. A layer‐by‐layer self‐assembled multilayer film was next prepared in an aqueous solution of the cationic amphiphile and poly(sodium 4‐styrenesulphonate); the UV‐Vis spectra showed that each layer of the LBL multilayer film was uniform. When the film was irradiated by LPUV, the photosensitive double bonds underwent [2+2] cycloaddition along the vector direction of LPUV. The polarized UV‐Vis absorption spectra also provided evidence that the film was anisotropic, i.e. the photopolymerization was along a certain direction. The anisotropic film was used as an alignment layer for nematic liquid crystals, and observations under a polarizing microscope indicated that the alignment of the liquid crystals was good, as expected, and that the orientation direction of the liquid crystals was always perpendicular to the electric vector of the irradiating LPUV.     

Catalytic solid substrate-room temperature phosphorimetry for the determination of trace As(V) based on oxidising reaction between hydrogen peroxide and fullerenol using tween-80 as sensitizer

A new catalytic solid substrate-room temperature phosphorimetry (SS-RTP) for the determination of trace arsenic(V) has been established. It is based on the fact that fullerenol (F-ol) emitted strong and stable room temperature phosphorescence (RTP) on nitric acid cellulose membrane (NCM) substrate. H₂O₂ could oxidise F-ol to cause the quenching of RTP. As(V) could catalyse H₂O₂ to oxidise F-ol and decrease the RTP signal of F-ol sharply. After adding tween-80 in the system, its ΔI _p enhanced 7.7 times compared with the without-tween-80 levels. Under the optimum conditions, the linear dynamic range of this method was 0.016?11.2 ag spot^?1 with a detection limit (LD) of 9.3 zg spot^?1 (corresponding concentration: 2.3 × 10^?17 g mL^?1). This sensitive, simple and selective method has been successfully applied to the determination of trace As(V) in human hair and tea samples. The reaction mechanism for SS-RTP is also discussed.     

The Effect of Temperature on GPC for the Separation of PCBs from Transformer Oil and Subsequent Analysis by GC-MSD

Abstract

The analysis of PCBs often involves lengthy and expensive cleanup procedures to remove interferences associated with environmental sample matrices. Gel permeation chromatography (GPC) has proven to be a useful tool in removing many of these interferences from environmental samples, especially from difficult matrices such as oils, lipids and sediments. This paper describes the effect of temperature upon the GPC column in separating PCBs from transformer oil and its implication on GC-MS analysis.     

Cationic polymerization of isobutylene at room temperature

This review highlights recent approaches toward polyisobutylene (PIB) by an energy efficient room temperature cationic polymerization. Special focus is laid on our own work using modified Lewis acids and nitrile‐ligated metal complexes associated with weakly coordinating anions. In both cases, suitable conditions have been found for efficient production of PIB characterized by medium to low molar masses and a high content of exo double bonds as end groups—the typical features of highly reactive PIB, an important commercial intermediate toward oil and gasoline additives. These and other approaches demonstrate that the cationic polymerization of isobutylene is still not fully explored, and new innovative catalyst systems can lead to surprising results of high commercial interest. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Bismuth Tri‐ and Tetraarylcarboxylates: Crystal Structures,In Situ X‐ray Diffraction,Intermediates and Luminescence

A systematic investigation of the systems Bi³⁺/carboxylic acid/HNO₃ for the tri‐ and tetracarboxylic acids pyromellitic acid (H₄Pyr), trimellitic acid (H₃Tri) and trimesic acid (H₃BTC) acid led to the discovery of five new bismuth carboxylates. Structural characterisation allowed the influence of the linker geometry and the Bi³⁺:linker molar ratio in the starting solution on the crystal structure to be determined. The crystallisation of three selected compounds was investigated by in situ energy‐dispersive X‐ray diffraction. Three new crystalline intermediates were observed within minutes, and two of them could be isolated by quenching of the reaction mixture. Their crystal structures were determined from laboratory and synchrotron X‐ray powder diffraction data and allowed a possible reaction pathway to be established. In depth characterisation of the luminescence properties of the three bismuth pyromellate compounds was carried out. Fluorescence and phosphorescence could be assigned to (mainly) ligand‐ and metal‐based transitions. The polymorphs of Bi(HPyr) exhibit different luminescence properties, although their structures are very similar. Surprisingly, doping of the three host structures with Eu³⁺ and Tb³⁺ ions was only successful for one of the polymorphs.     

模型多肽Trp-Cage折叠形成机制的研究进展

蛋白质折叠是目前结构生物学领域的核心问题之一, 理解蛋白质结构折叠机制及其与生物功能之间的相互关系一直是生命科学家非常重要的研究内容, 并且该研究受到越来越多不同学科领域研究工作者的高度重视. 蛋白质大多数在数十毫秒、微秒或几秒内完成自我折叠过程, 但其折叠过程中所发生的分子结构精细转变却在纳秒甚至更短时间尺度内完成. 由于其折叠时间分辨率的限制, 目前无论是从常规实验还是理论计算角度对其研究都存在一定的难度. 本文首先概述了蛋白质折叠研究在实验和理论模拟方面存在的一些问题,然后以结构典型且可快速折叠的人工设计多肽Trp-cage为例,主要对其折叠过渡温度、折叠形成模型及其肽链上关键氨基酸残基在折叠过程中的作用三个方面进行了详细讨论, 综述了模型多肽Trp-cage的折叠动力学行为分别在实验和理论模拟方面的研究进展. 最后就如何有效化解蛋白质残基间相互作用网络进而降低其折叠机制的复杂性提出了一些新的建议, 不仅有助于阐明该迷你蛋白Trp-cage快速折叠、稳定形成的驱动力成因, 而且也能为蛋白质折叠机制研究和多肽设计提供有益参考.     

基于主动式时间反转镜的声呐目标强度测量研究

为提高目标强度测量过程中的抗噪声、混响以及浅海多途干扰性能,从军标文件中的目标强度测量方法以及主动式时间反转镜的基本原理出发,经过研究和推演,发现可将基于单阵元的主动式时间反转镜与相关器结合应用于目标强度测量过程,提出了一种新的目标强度测量方法。该方法利用了主动式时间反转镜的抗多途特性,使得测量具有抗多途的性能;利用噪声与信号的不相关特性,算法结合相关器起到了很好的抗随机噪声效果;混响中的体积混响是随机的,算法具有抗体积混响的性能。论文分别从理论仿真和水池实验验证了算法的有效性和正确性。