Temperature Effect on the Phase Behavior of the Systems Water/Sucrose Laurate/Ethoxylated‐mono‐di‐glyceride/Oil

The phase behavior of the systems water/sucrose laurate/ethoxylated mono‐di‐glyceride/oil was investigated as function of temperature and the weight ratio of EMDG in the mixed surfactants. The oils were R (+)‐limonene, isopropylmyristate, and caprylic‐capric triglyceride. This study demonstrates that the phase inversion temperature (PIT) decreases and the efficiency of the mixed surfactants (γ¯) increase as the weight ratio of the EMDG in the mixed surfactants increases. R (+)‐limonene gave lower phase inversion temperatures and higher efficiencies compared to isopropylmyristate, and caprylic‐capric triglyceride. The solubilization capacity of the system water/sucrose laurate/oil increased upon the addition of ethoxylated mono‐di‐ glyceride which stabilize the surfactant layer and increase the interfacial area.     

Oil-Induced Structural Change in Nonionic Microemulsions

Effect of added oil (heptane or squalane) on the microemulsion structures in polyoxyethylene dodecyl ether (C₁₂EO_n) systems was investigated by means of phase behavior and NMR diffusion experiments. In the binary water-C₁₂EO_n systems, an isotropic fluid, D₂ (or L₃), and an aqueous micellar solution, Wm, phases are successively formed with increasing the EO-chain length. Upon addition of heptane, D₂ and Wm phases are merged and a microemulsion of large solubilization is produced at a low surfactant concentration. With squalane, the solubilization of oil in D₂ phase is very low or almost zero, whereas the oil solubilization in Wm phase is relatively large. These structural changes in microemulsions are discussed based on the self-diffusion coefficients of water, oil, and surfactant measured by the PGSE-NMR method. The difference in the phase behavior may be attributed to the difference in the penetration tendency of oil in the surfactant palisade layer.     

Microstructure and Magnetic Properties of Carbon‐Coated Nanoparticles

Abstract

In the present work, microstructure and superparamagnetic properties of two types of carbon‐coated magnetic Ni and Fe nanoparticles [Ni(C) and Fe(C)] are reviewed. High‐resolution transmission electron microscopy (HRTEM), electron diffraction (SAED), and x‐ray diffraction (XRD) analyses have been used to reveal the distinct structural morphologies of Ni and Fe nanoparticles. Moreover, novel carbon‐coated Ni nanoparticle assemblies offer us great opportunities for studying the mechanism of superparamagnetism in particle assemblies. Magnetization measurements [M(T) and M(H) curves] for assemblies of Ni nanoparticles indicate that modified superparamagnetic properties at T > T _B, have been found in the assemblies of Ni(C) particles. The blocking temperature, T _B, is determined to be near 115K under a certain applied field. Above T _B, the magnetization M(H, T) can be described by the classical Langevin function L using the relation, M/M _s (T = 0) = coth (μH/kT) ? kT/μH. It is suggested that these assemblies of carbon‐coated Ni nanoparticles have typical single‐domain, field‐dependent superparamagnetic relaxation properties. Finally, Mössbauer spectra and hyperfine magnetic fields at room temperature for the assemblies of Fe(C) nanoparticles confirm their distinct nanophases that were detected by structural analysis. Modified superparamagnetic relaxation is observed in the assemblies of Fe(C) nanoparticles, which is attributed to the nanocrystalline nature of the carbon‐coated nanoparticles.     

Emulsions of Heavy Crude Oils. II. Viscous Responses and Their Influence on Emulsion Stability Measurements

The stability of 30 heavy crude oil emulsions was studied in a parallel-plate laboratory coalescer (DC field). Particularly, viscous responses and their influence on the emulsion stability measurements were investigated. In addition to highlighting previous results from the same experimental setup and discussing these based on recent experience, new results at different temperatures and volume fractions of water were presented. A new semi-empirical model for the characteristic time of the destabilization process was presented. The electrical forces were modelled with a point-dipole approximation and the hydrodynamic resistance to droplet transport was modelled with an empirical term including the logarithmic viscosity of the oil phase. The new model clearly performed much better than the previous model, particularly for very viscous crude oils. Studies of the performance of industrial electrocoalescers have showed that simple electrostatic theory can potentially explain complex separation phenomena when the resistance to the coalescence step is reduced by an efficient demulsifier. The ultimate goal is to build a model for both the laboratory setup and the industrial coalescer so that laboratory experiments can be used to predict the behavior of the industrial process.     

Experimental Validation of the Temperature-Resistant and Salt-Tolerant Xanthan Enhanced Foam for Enhancing Oil Recovery

Xanthan enhanced foam (XGF) is a newly developed chemical agent for enhanced oil recovery in high-temperature and high-salinity reservoirs. In this paper, laboratory experiments were performed to characterize the morphology and foam properties of XGF, to study its performance under different temperature and different salinity conditions, respectively. Based on simulate reservoir formation conditions of Xidaliya field, a series of research on XGF were conducted. The experimental results showed that the scanning electron microscopy of XGF reflected a more viscoelastic and stable nature of the foam system. High temperature had a great adverse impact upon the stability of XGF, and the increase of salinity in the solution helped to improve the stability of foam. The foam stability increased remarkably when XG4 is added, and an increase in ambient pressure made enhancement of foam stability became more noticeable. In the presence of crude oil, Xanthan could enhance the stability of emulsions and was more favorable to stabilize foam. XG4 enhanced foam had dramatic properties for mobility controlling and oil displacement in the porous media.     

Propylene Glycol and Ethoxylated Surfactant Effects on the Phase Behavior of Water/Sucrose Stearate/Oil System

In this work, we studied the phase behavior as function of temperature of water/sucrose stearate/propylene glycol/oil and water/sucrose stearate/ethoxylated mono‐di‐glyceride/oil systems. The oils were R (+)‐limonene, isopropylmyristate, and caprylic‐capric triglyceride. It was found that adding propylene glycol and ethoxylated mono‐di‐glyceride to the water/sucrose stearate/R (+)‐limonene and water/sucrose stearate/isopropylmyristate systems decreases the temperature and surfactants concentration needed for the formation of a microemulsion phase region and no three phase region is observed. In the case of water/sucrose stearate/caprylic‐capric triglyceride system a three phase region is observed. In the caprylic‐capric based system, it was found that increasing the propylene glycol and ethoxylated mono‐di‐glyceride contents decrease the phase inversion temperature and increases the efficiency. In the case where the mixed surfactants (sucrose stearate and ethoxylated mono‐di‐glyceride) were present in the system, the efficiencies observed are higher than those observed in the system based on the mixture of sucrose stearate and propylene glycol.     

Microwave‐Assisted Synthesis and Characterization of CuO Nanocrystals

CuO feather‐like and flower‐like crystals have been synthesized by a fast microwave‐assisted solution approach using Cu(NO₃)₂ and NaOH. The morphology transformation of CuO could be achieved by ionic liquid 1‐n‐butyl‐3‐methyl imidazolium tetrafluoroborate ([BMIM]BF₄). With [BMIM]BF₄, flower‐like CuO were obtained, whereas without [BMIM]BF₄, feather‐like CuO were obtained. The possible formation mechanism of flower‐like CuO was discussed on the basis of experimental results. The products were characterized by XRD, FESEM/EDS, and TEM/SAED. In addition, the adsorption of [BMIM]BF₄ on flower‐like CuO was confirmed by FTIR and TG/DSC, and the band gap energies of the flower‐like CuO was estimated by UV‐vis spectra.     

Photocatalytic Activity of High Aspect Ratio TiO2 Nanorods

In this article, TiO₂ nanorods (aspect ratio >20) were prepared through a polyol process and doped with metal ions (Cu²⁺, Ni²⁺, Fe³⁺, and Cr³⁺). Compared with TiO₂ nanoparticles, the TiO₂ nanorods displayed relatively higher photocatalytic activity for the degradation of copper sulfophthalocyanine. Moreover, the photocatalytic activity was greatly enhanced when the metal ions were doped in the TiO₂ nanorods.     

Effects of Spacer Chain Length and Additives on Solution Properties of Cationic Gemini Surfactant

The critical micelle concentration (CMC) has been determined for the gemini surfactant trimethylene-1,3-bis(dodecyldimethyl ammonium bromide)12-s-12,2Br^?1 by means of electricity conductivity measurements. For the same number of carbon atoms in the hydrophobic chain per hydrophilic head group, geminis have CMC values well below those of conventional single-chain cationic surfactants. The CMC of 12-3-12 reduces with the addition of n-alcohol except ethanol and with the increase of n-alcohol chain length as well as increase of concentration of n-butanol and sodium chloride. Steady-state fluorescence quenching technology has been employed to study the aggregation number of micelle, which increases with increase in the length of n-alcohol. The Kraft temperature measurements also indicate that the stability of solid surfactant hydrate decreases along with the improvement of concentration of n-butanol and sodium chloride.     

反应温度对加氢残渣油四组分含量和结构的影响

以沙轻减渣为原料,在高压釜内研究了不同反应温度下加氢反应前后渣油的四组分含量及其结构组成变化。结果表明,加氢残渣油中的饱和分含量明显增加,而芳香分和胶质的含量均降低,四组分含量随反应温度的升高均呈现规律性变化。加氢后四组分的H/C摩尔比和平均相对分子质量均降低,芳碳分率增加。随反应温度升高,四组分的H/C摩尔比和平均相对分子质量降低,烷基碳分率降低;芳香分、胶质和沥青质的芳碳分率增加;胶质和沥青质的总环数和芳环数均降低。渣油加氢过程中四组分都发生了明显的氢解和脱烷基反应。加氢反应中,胶质和沥青质结构单元间的各种桥键可发生明显地断裂,导致其结构单元数减少,且结构单元数随反应温度的升高而减少。