基于投影寻踪原理的建筑业综合实力评价分析

在分析影响建筑业综合实力因素的基础上,选择了规模效益水平、技术装备水平、效率水平三个方面共12个评判指标,建立了建筑业综合实力评价的投影寻踪分类模型(PPC),并利用基于实数编码的加速遗传算法(RAGA)求解最佳投影方向.根据投影值的大小对地区建筑业综合实力进行评价分析.PPC模型具有稳健性好、投影值准确度高、评价结果...     

Mid-infrared absorption cross-sections and temperature dependence of CFC-113

The temperature dependence of the infrared absorption cross-sections of CFC-113 (1,1,2-trichlorotrifluoroethane) in a pure vapor phase has been recorded in the 600-1250 cm⁻¹ spectral region using Fourier transform spectroscopy. Spectra at 0.05 cm⁻¹ resolution have been used to derive the integrated band strengths of the five main absorption bands over a range of temperatures from 223 to 283 K. Our results show good agreement with previously published data. The new cross-sections will allow more accurate retrieval of atmospheric CFC-113 concentrations using infrared spectroscopic techniques.     

Effect of the molecular weight of sizing agent on the surface of carbon fibres and interface of its composites

The influence of different molecular weight sizing agent on the performances of carbon fibres and carbon fibres composites were studied. Three different kinds of molecular weight sizing were used. Surface composition of the fibres modified with aqueous sizing and topographies of carbon fibres surface were characterized by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and scanning electron microscope (SEM). The interlaminar shear strength and hygrothermal ageing test have been used to study the effect of fibres coatings on the adhesion of surface. The results of the study indicate that the molecular weight of sizing agent has an important influence to the carbon fibres and carbon fibres composites. The high and low molecular weight sizing agent decreased the interfacial shear strengths and hygrothermal ageing of carbon fibres composite. The moderate molecular weight of sizing agent showed an improvement of the interfacial adhesion and hygrothermal ageing.     

Interface and its effect on the interlaminate shear strength of novel glass fiber/hyperbranched polysiloxane modified maleimide-triazine resin composites

Interface is the key topic of developing advanced fiber reinforced polymeric composites. Novel advanced glass woven fabric (GF) reinforced composites, coded as GF/mBT, were prepared, of which the matrix resin was hyperbranched polysiloxane (HBPSi) modified maleimide-triazine (mBT) resin. The influence of the composition of the matrix on the interfacial nature of the GF/mBT composites were studied and compared with that of the composite based on GF and BT resin using contact angle, X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), and dielectric properties over wide frequency and temperature ranges. Results show that the interfacial nature of the composites is dependent on the chemistries of the matrices, mBT matrices have better interfacial adhesion with GF than BT resin owing to the formation of chemical and hydrogen bonds between mBT resin and GF; while in the case of mBT resins, the content of HBPSi also plays an important role on the interfacial feature and thus the macro-performance. Specifically, with increasing the content of HBPSi in the matrix, the interlaminate shear strength of corresponding composites significantly improves, demonstrating that better interfacial adhesion guarantees outstanding integrated properties of the resultant composites.     

Effect of vacuum heat treatment on tensile strength and fracture performance of cold-sprayed Cu-4Cr-2Nb coatings

The previous study [1] indicated that dense thick Cu-4Cr-2Nb coatings could be formed by cold spraying, and the post-spray heat treatment could significantly influence the microstructure and microhardness of the as-sprayed Cu-4Cr-2Nb coatings. In this study, the tensile strength and fracture performance of the Cu-4Cr-2Nb coatings after annealing were investigated. The vacuum heat treatment was conducted under 10⁻² Pa at 850 °C for 4 h. Results showed that the heat treatment had a great contribution to the healing-up of the incompleteness of the interfaces between the deposited particles. In addition, the coating microhardness decreased from 156.8 ± 4.6 Hv_0.2 for the as-sprayed coatings to 101.7 ± 4.5 Hv_0.2 for the annealed ones. The mean tensile strength of the annealed coatings was approximately 294.1 ± 36.1 MPa compared to that of 45.0 ± 10.5 MPa for the as-sprayed ones, which results from the partially metallurgically bonded zones between the deposited particles inducing by the heat treatment process.     

Preparation and in vitro characterization of aerosol-deposited hydroxyapatite coatings with different surface roughnesses

Hydroxyapatite (HA) coatings with different surface roughnesses were deposited on a Ti substrate via aerosol deposition (AD). The effect of the surface roughness on the cellular response to the coating was investigated. The surface roughness was controlled by manipulating the particle size distribution of the raw powder used for deposition and by varying the coating thickness. The coatings obtained from the 1100 °C-heated powder exhibited relatively smooth surfaces, whereas those fabricated using the 1050 °C-heated powder had network-structured rough surfaces with large surface areas and were superior in terms of their adhesion strengths and in vitro cell responses. The surface roughness (R_a) values of the coatings fabricated using the 1050 °C-heated powder increased from approximately 0.65 to 1.03 μm as the coating thickness increased to 10 μm. The coatings with a rough surface had good adhesion to the Ti substrate, exhibiting high adhesion strengths ranging from 37.6 to 29.5 MPa, depending on the coating thickness. The optimum biological performance was observed for the 5 μm-thick HA coating with an intermediate surface roughness value of 0.82 μm.     

电感耦合等离子体原子发射光谱法同时测定高强度玻璃纤维粉体中9种金属元素

建立电感耦合等离子体原子发射光谱法测定高强度玻璃纤维粉体中铝、镁、钙、铁、钛、锂、铈、钠、钾9种金属元素含量的方法。采用氢氟酸、高氯酸和盐酸分两段溶解样品,分别在选定的各元素分析谱线下,采用电感耦合等离子体原子发射光谱仪测定各元素含量。9种金属元素在各自的质量浓度范围内与光谱强度成良好的线性关系,相关系数均大于0.999,检出限为8.0~17.4 μg/g。测定结果的相对标准偏差小于1.8%(n=6),加标回收率为97.6%~103.7%。该方法准确,简便,快速,适用于高强度玻璃纤维中多金属元素的同时测定。     

The electrospun poly(ε‐caprolactone)/fluoridated hydroxyapatite nanocomposite for bone tissue engineering

Biodegradable cell‐incorporated scaffolds can guide the regeneration process of bone defects such as physiological resorption, tooth loss, and trauma which medically, socially, and economically hurt patients. Here, 0, 5, 10, and 15 wt% fluoridated hydroxyapatite (FHA) nanoparticles containing 25 wt% F^? and 75 wt% OH^? were incorporated into poly(ε‐caprolactone) (PCL) matrix to produce PCL/FHA nanocomposite scaffolds using electrospinning method. Then, scanning electron microscopy (SEM), X‐ray diffraction (XRD) pattern, and Fourier transform infrared spectroscopy (FTIR) were used to evaluate the morphology, phase structure, and functional groups of prepared electrospun scaffolds, respectively. Furthermore, the tensile strength and elastic modulus of electrospun scaffolds were investigated using the tensile test. Moreover, the biodegradation behavior of electrospun PCL/FHA scaffolds was studied by the evaluation of weight loss of mats and the alternation of pH in phosphate buffer saline (PBS) up to 30 days of incubation. Then, the biocompatibility of prepared mats was investigated by culturing MG‐63 osteoblast cell line and performing MTT assay. In addition, the adhesion of osteoblast cells on prepared electrospun scaffolds was studied using their SEM images. Results revealed that the fiber diameter of prepared electrospun PCL/FHA scaffolds alters between 700 and 900 nm. The mechanical assay illustrated the mat with 10 wt% FHA nanoparticles revealed the highest tensile strength and elastic modulus. The weight loss alternation of mats determined around 1% to 8% after 30 days of incubation. The biocompatibility and cell adhesion of mats improved by increasing the amounts of FHA nanoparticles.     

Enhancement on interlaminar shear strength and water‐lubricated tribological performance of high‐strength glass fabric/phenolic laminate by the incorporation of carbon nanotubes

High‐strength glass fabric (HSGF)/phenolic laminates modified with different contents of carbon nanotubes (CNTs) were fabricated by hot‐compression technique. The effects of CNTs on the interface of HSGF/phenolic, interlaminar shear strength (ILSS) and water‐lubricated tribological performance of HSGF/phenolic laminate were investigated. The ILSS of the laminates were tested on a universal testing machine (DY35), and the tribological properties were evaluated by a block‐on‐ring tribo‐tester. The interfaces of HSGF/phenolic and the worn surfaces of the laminates were analyzed by scanning electron microscope. The results showed that the moderate incorporation of CNTs improved the interface of HSGF/phenolic and accordingly enhanced the ILSS of the laminate. Besides, the friction coefficient of HSGF/phenolic laminate sliding against stainless steel in water can be remarkably stabilized and lowered by the incorporation of CNTs due to the better water lubrication induced by added CNTs and the intrinsic self‐lubrication of CNTs which were further graphitized during the friction and wear process. And the wear rate of the laminate can be accordingly reduced by 1 order of magnitude. The results indicate that CNTs have excellent potential in enhancing both ILSS and tribological fabric/polymer laminate composite, which will greatly improve the current situation of deterioration on mechanical properties by adding traditional solid lubricants. Copyright © 2014 John Wiley & Sons, Ltd.