Dissociation quotients of succinic acid in aqueous sodium chloride media to 225°C

The first and second molal dissociation quotients of succinic acid were measured potentiometrically with a hydrogen-electrode, concentration cell. These measurements were carried out from 0 to 225°C over 25° intervals at five ionic strengths ranging from 0.1 to 5.0 molal (NaCl). The dissociation quotients from this and two other studies were combined and treated with empirical equations to yield the following thermodynamic quantities for the first acid dissociation equilibrium at 25°C: log K_1a=–4.210±0.003; H _1a ⁰ =2.9±0.2 kJ-mol^–1; S _1a ⁰ =–71±1 J-mol^–1-K^–1; and C _p1a ⁰ =–98±3 J-mol^–1-K^–1; and for the second acid dissociation equilibrium at 25°C: log K_2a=–5.638±0.001; H _2a ⁰ = –0.5±0.1 kJ-mol^–1; S _2a ⁰ =–109.7±0.4 J-mol^–1-K^–1; and C _p2a ⁰ = –215±8 J-mol^–1-K^–1.     

簇离子Mo_3S_4M~（n＋）中M与Mo成键作用及电子光谱（M＝Fe、Ni，n＝4；M＝Cu，n＝5）

应用ＩＮＤＯ／Ｓ半经验量子化学方法，对簇合物离子Ｍｏ３Ｓ和Ｍｏ３Ｓ４Ｍｎ＋（Ｍ＝Ｆｅ、Ｎｉ，ｎ＝４；Ｍ＝Ｃｕ，ｎ＝５）分别进行分子轨道计算。根据计算得到的簇离子中的原子表观电荷和成键指标，说明Ｆｅ、Ｎｉ、Ｃｕ＋与Ｍｏ３Ｓ成键作用的相对强度依次是Ｆｅ－Ｍｏ＞Ｎｉ－Ｍｏ＞Ｃｕ＋－Ｍｏ。比较了用含组态作用的ＩＮＤＯ／Ｓ方法计算得到的电子跃迁能与实验得到的电子吸收光谱值，并讨论了吸收峰归属情况。对于Ｍ为Ｆｅ、Ｎｉ的簇离子Ｍｏ３Ｓ４Ｍ４＋，最低能量的电子跃迁吸收峰起源于异金属间电荷转移跃迁（ＭＭ’ＣＴ）；而Ｍｏ３Ｓ４Ｃｕ（５＋）簇离子观察到的吸收峰主要是Ｍｏ３Ｓ芯的局域内电荷转移跃迁。根据理论计算结果，由Ｃｕ＋离子到Ｍｏ３Ｓ的电荷转移跃迁谱线，大约在４６０００ｃｍ－１以上才能观察到吸收峰。从Ｍｏ３Ｓ４Ｆｅ４＋次低能量吸收峰的实验值１６６００ｃｍ－１和理论值１６５００ｃｍ－１与Ｍｏ３Ｓ的最低能量吸收峰的实验值１６６００ｃｍ－１和理论值１６９００ｃｍ－１比较，表明无论从理论上或实验上都能证实簇离子Ｍｏ３Ｓ４Ｆｅ４＋在能量为１６６００ｃｍ－１处的吸收峰是起因于Ｍｏ３Ｓ芯的局域内电荷转移跃迁。     

Tailoring the dielectric properties and energy storage density of 1−x(0.94NaNbO3−0.06SZ)−xBi2O3 through substitution strategy

Energy storage using dielectric capacitors is a growing area of research and development. However, designing a highly performing dielectric capacitor is still a challenge. Despite the excellent results achieved in lead-based dielectrics, lead-free substitutes are essential because of the environmental concerns associated with lead-based products. The lead-free 1?x (0.94NaNbO₃? 0.06SrZrO₃)+ x Bi₂O₃ ceramics abbreviated NNSZ + xB for x = 0.0, 0.05, 0.1, 0.15, and 0.20 was fabricated via solid-state reaction. A recoverable energy density of 2.93 J cm?³ was obtained for NNSZ+0.1B, associated with high thermal stability (25–130 °C), excellent cycling (N = 10⁵), and high efficiency (η) of 83.5%. Moreover, the introduction of Bi₂O₃ significantly improved the electrical insulation (?_r at 1 kHz = 1608 and tan δ = 0.0038) and breakdown strength (380 kVcm?¹) of NNSZ+0.1B by minimizing the formation of sodium, bismuth, and oxygen vacancies. The results obtained in this study provide a benchmark for further investigations on NaNbO₃-based ceramics. More importantly, this study suggests that NNSZ + xB ceramics can be used in pulsed power technology.     

Enhanced Physical and Mechanical Properties of Nitrile-Butadiene Rubber Composites with N-Cetylpyridinium Bromide-Carbon Black

The physical and mechanical properties of nitrile–butadiene rubber (NBR) composites with N-cetylpyridinium bromide-carbon black (CPB-CB) were investigated. Addition of 5 parts per hundred rubber (phr) of CPB-CB into NBR improved the tensile strength by 124%, vulcanization rate by 41%, shore hardness by 15%, and decreased the volumetric wear by 7% compared to those of the base rubber-CB composite.     

Hydrolysis of (CH3)3Sn+ in Various Salt Media

The hydrolysis of trimethyltin(IV) has been studied by potentiometry (H⁺ -glass electrode) and calorimetry in various salt media (NaNO₃, NaCl, KCl, Na₂SO₄, and NaNO₃—NaCl mixtures). The effect of ionic strength on the hydrolysis constants is accounted for by a simple Debye–Hückel type equation and by Pitzer equations. The results allow us to obtain H for hydrolysis and the temperature dependence of the Pitzer parameters. The resulting coefficients can be used to examine the speciation of (CH₃)₃Sn⁺ in multicomponent electrolyte solutions, such as natural waters, over a wide range of temperature and ionic strength.     

钛及钛合金表面羟基磷灰石涂层结合强度及稳定性

钛(Ti)及其合金凭借优异的机械性能和良好的生物相容性,一直是骨和牙种植体的主要临床应用材料。由于钛及其合金自身的生物惰性,不易与周围骨组织进行快速的骨整合,因此其表面的生物活性有待进一步提高。羟基磷灰石(HA)是人体骨和牙齿的主要无机成分,具有良好的生物活性和生物相容性,受其力学性能的制约,常被作为涂层材料覆盖在钛基体表面,用以提高植入体的生物活性。但一直存在涂层与基体界面结合强度低和涂层力学稳定性差的问题,成为限制其临床广泛应用的主要因素。本文从涂层结构设计、成分设计及制备方法等方面,就国内外改善钛基底与HA涂层界面结合性能的研究现状和发展动态作一综述,为高性能钛植入体的制备和应用提供参考。     

硅氮化合物的结构与水解稳定性的关系

采用硅氮化合物本体与水蒸汽直接作用的方法,研究了一系列硅氮化合物的结构与水解稳定性之间的关系.结果表明,空间位阻越大则硅氮化合物水解稳定性越好,环张力对硅氮烷的水解稳定性有一定的影响,但空间位阻的作用更为显著.带有苯基的环二硅氮烷、六苯基环三硅氮烷和含硅氮键的高分子聚合物具有较大的空间位阻,因此水解稳定性非常好.     

Glass fiber reinforced bismaleimide/epoxy BaTiO3 nano composites for high voltage applications

BaTiO₃/bismaleimide/epoxy/glass fiber reinforced composites were prepared using E-glass fiber (E-GF) and silane coated E-glass fiber (SC-EGF) separately as reinforcement. BaTiO₃ nanoparticles were prepared by hydrothermal method. Results show that the addition of BaTiO₃ nanoparticles has significant effects on the mechanical and dielectric properties of the composite. Both E-GF and SC-EGF reinforced BaTiO₃/bismaleimide/epoxy composites with 2 wt percentages of BaTiO₃ nanoparticles showed improved tensile strength, flexural strength and dielectric constant and those with 3% showed high dielectric strength indicating this composition is more adaptable for high voltage insulating applications. Dielectric constants and dielectric loss of the fabricated nanocomposites have been obtained at higher frequencies (in GHz) by using Vector Network Analyser at room temperature and was found to be highest for the BMI-Epoxy nanocomposite with 1% weight nanofiller.     

Influence of Musa acuminate bio-filler on the thermal,mechanical and visco-elastic behavior of poly (propylene) carbonate biocomposites

Biocomposites were fabricated using poly(propylene) carbonate as matrix and cellulosic polysaccharide banana (Musa acuminate) peel powder as filler in varying concentrations (5–25?wt.%) and were characterized for their functional properties. Microscopic analysis indicated the uniform distribution and existence of microfibrils in the filler. The thermal stability of the composites was lower than the matrix till 320?°C, beyond which it increased. The visco-elastic and mechanical behavior of the biocomposites was found to be enhanced with the addition of fillers. Thus, with better thermal, visco-elastic, and mechanical properties, the biocomposite films can be a replacement for the non-biodegradable polymers for packaging applications.