MOF-Derived Double-Layer Hollow Nanoparticles with Oxygen Generation Ability for Multimodal Imaging-Guided Sonodynamic Therapy

The high reactive oxygen species (ROS) generation ability and simple construction of sonosensitizer systems remain challenging in sonodynamic therapy against the hypoxic tumor. In this work, we rationally prepared MOF-derived double-layer hollow manganese silicate nanoparticle (DHMS) with highly effective ROS yield under ultrasound irradiation for multimodal imaging-guided sonodynamic therapy (SDT). The presence of Mn in DHMS increased ROS generation efficiency because it could be oxidized by holes to improve the electron–hole separation. Moreover, DHMS could produce oxygen in the tumor microenvironment, which helps overcome the hypoxia of the solid tumor and thus enhance the treatment efficiency. In vivo experiments demonstrated efficient tumor inhibition in DHMS-mediated SDT guided by ultrasound and magnetic resonance imaging. This work presents a MOF-derived nanoparticle with sonosensitive and oxygen generating ability, which provides a promising strategy for tumor hypoxia in SDT.     

Towards understanding the critical heat flux for industrial applications

Understanding CHF is of an upmost importance in many industries, especially in the design and operation of boilers, nuclear power plants, cryogenic systems, etc. Due to safety issues related to the nuclear power plants, and the adaptation of CHF as the limiting criterion of power generation, it is important to understand the mechanisms of CHF relevant to nuclear systems operation. Moreover, CHF is expected to occur during transients than steady-state conditions. Therefore, knowledge of transient CHF is of great importance for the safety evaluation of nuclear reactors under transient condition. In this paper, the existing CHF experimental and modeling studies are discussed in order to understand the phenomena leading to CHF. Also, the effect of transient conditions on CHF for nuclear fuels has been evaluated.     

温差电技术原理及在工科物理实验中的应用

简要介绍温差电技术的基本原理以及运用该原理设计、制作一些在工科物理实验中的装置。     

流动注射氢化物石墨炉原子吸收法的应用研究 Ⅰ.——实验装置与分析性能

氢化物石墨炉联用技术的原理是先在较低温度下将氢化物蒸气通入石墨炉并分解沉积于石墨管的内表面,然后再在高温下原子化。该法能明显提高灵敏度,消除液相和气相干扰。本文采用自制的半自动氢化物石墨炉进样系统及流动注射氢化物发生器,直接在普通石墨炉上进行氢化物石墨炉分析,研究了部分元素的测定条件,建立的方法操作方便,灵敏度高,耗样少,线性范围宽,是一种值得推广的新方法。     

Enthalpies of Phase Transitions and Heat Capacity of TbCl3 and Compounds Formed in TbCl3–MCl Systems (M=K, Rb, Cs)

The molar enthalpies of the solid–solid and solid–liquid phase transitions were determined by differential scanning calorimetry for pure TbCl₃ and KTb₂Cl₇, RbTb₂Cl₇, CsTb₂Cl₇, K₃TbCl₆, Rb₃TbCl₆ and Cs₃TbCl₆ compounds. Both types of compounds, i.e. M₃TbCl₆ and MTb₂Cl₇ (M=K, Rb, Cs) melt congruently and show additionally a solid–solid phase transition with a corresponding enthalpy Δ_trs H ⁰ of 6.1, 7.6 and 7.0 kJ mol^–1 for potassium, rubidium and caesium M₃TbCl₆ compounds andΔ_trs H ⁰ of 17.1 (rubidium) and of 12.1 and 10.9 kJ mol^–1 (caesium) for MTb₂Cl₇ compounds, respectively. The enthalpies of fusion were measured for all the above compounds with the exception of Rb₃TbCl₆ and Cs₃TbCl₆. The heat capacities of the solid and liquid compounds have been determined by differential scanning calorimetry (DSC) in the temperature range 300–1100 K. The experimental heat capacity strongly increases in the vicinity of a phase transition, but varies smoothly in the temperature ranges excluding these transformations. C _p data were fitted by an equation, which provided a satisfactory representation up to the temperatures of C _p discontinuity. The measured heat capacities were checked for consistency by calculating the enthalpy of formation of the liquid phase, which had been previously measured. The results obtained agreed satisfactorily with these experimental data. This revised version was published online in August 2006 with corrections to the Cover Date.     

Thermal Studies on Ionic Derivatives of Hafnium(IV) Involving Maltol Ligand

A number of ionic chelate complexes of maltol(A) and hafnium(IV) the type[(η₅−C₅H₅)₂HfL]⁺[MCl3]⁻ (B) [HL=maltol; M=Zn(II), Cd(II), Hg(II), Cu(II)]have been synthesized and characterized by spectral studies (IR, UV, ¹H NMR and ¹³C NMR). The stoichiometry of the complexes has been confirmed by conductance measurements. Thermogravimetric (TG) and differential thermal analytical (DTA) studies have been carried out for these complexes and from TG curves, the order, apparent activation energy and apparent activation entropy of the thermal decomposition reactions have been elucidated .The order in each case has been determined to be one and the degree of spontaneity and lability have been inferred from the apparent activation energy and entropy, respectively. Thermal parameters have been correlated with some structural aspects of the complexes concerned. From differential thermal analysis curves, the heat of reaction has been calculated. This revised version was published online in August 2006 with corrections to the Cover Date.     

Ferroelectric phase transitions in Pb2xSn2(1-x)P2Se6 system

Heat capacities of the Pb_2xSn_2(1-x)P₂Se₆ crystals (x=0, 0.098, 0.251, 0.402 and 1.0) were measured using an adiabatic calorimeter at temperatures between 10 and 350 K. In the crystal of x=0, two heat capacity anomalies corresponding to the ferroelectric commensurate - intermediate incommensurate(C-IC) phase transition temperature T _i, and the incommensurate - paraelectric (IC-N) phase transition temperature T _c, were observed at 193.24±0.10 and 220.07±0.15 K, respectively. The phase transition temperatures decreased with an increase in Pb²⁺ concentration. The anomaly at Ti disappeared at x=0.251 in the mixed systems of the Pb_2xSn_2(1-x)P₂Se₆. In the crystal of Pb₂P₂Se₆ (x=1.0), no phase transition was observed. The normal heat capacities for the mixed crystals were determined by least squares fitting of the Debye and Einstein functions to the experimental data. The anomalous heat capacities gave the phase transition entropies of 8.5 and 1.5 J mol^-1 K^-1 for x=0. The large transition entropies are consistent with an order-disorder mechanism in the ferroelectric-paraelectric phase transitions in x=0. This revised version was published online in August 2006 with corrections to the Cover Date.     

Effect of the Measurement Temperature on the Dispersive Component of the Surface Free Energy of a Heat Treated SiO2 Xerogel

The surface free energy of a monolithic silica xerogel treated at 1000°C has been measured by inverse gas chromatography in the temperature range 25–150°C using n-alkanes. Values of the dispersive component, _S ^D, vary from 49.07 mJ·m^–2 at 25°C to 17.20 mJ·m^–2 at 150°C. The _S ^D value obtained at 25°C is lower than that found for amorphous and crystalline silicas but higher than that found for glass fibres meaning that the heat treatment at 1000°C changes drastically the structure of the silica xerogel showing a surface similar to a glass. However, the higher value of _S ^D in comparison to glass fibres can be attributed to the mesoporous structure present in the silica xerogel. In the temperature range of 60–90°C there exists an abrupt change of the _S ^D values as well as in the dispersive component of the surface enthalpy, h _S ^D. Such abrupt change can be attributed to an entropic contribution of the surface free energy.     

Preparation and Characterization of Highly Proton-Conductive Composites Composed of Phosphoric Acid-Doped Silica Gel and Styrene-Ethylene-Butylene-Styrene Elastomer

Highly proton-conductive elastic composites have been successfully prepared from H₃PO₄-doped silica gel and a styrene-ethylene-butylene-styrene (SEBS) block elastic copolymer. Ionic conductivities of the composites depended on the concentration of H₃PO₄ and the heat treatment temperature of the H₃PO₄-doped silica gel. It was found that H₃PO₄ added is present mainly as free orthophosphoric acid in the silica gel. The composite composed of H₃PO₄-doped silica gel with a molar ratio of H₃PO₄/SiO₂ = 0.5 heat-treated at temperatures below 200°C and SEBS elastomer in 5 mass% showed a high conductivity of 10^–5 S cm^–1 at 25°C in an dry N₂ atmosphere. The water adsorption during a storage in 25% relative humidity at room temperature for 1 day enhanced the ionic conductivities of composites by about one order of magnitude. Lower conductivities obtained in the composite with the H₃PO₄-doped silica gel heat-treated at 250°C for 1 h were due to the formation of crystalline Si₃(PO₄)₄. The temperature dependence of conductivity of the composites was the Vogel-Tamman-Fulcher type, indicating that proton was transferred through a liquidlike phase formed in micropores of the H₃PO₄-doped silica gels. The temperature dependence of the modulus of the composite was similar to that of the SEBS elastomer. The thermoplastically deforming temperature of the composite was around 100°C, which was higher by 30°C than that of the SEBS elastomer.     

A genetic algorithm for the automated generation of small organic molecules: Drug design using an evolutionary algorithm

Rational drug design involves finding solutions to large combinatorial problems for which an exhaustive search is impractical. Genetic algorithms provide a novel tool for the investigation of such problems. These are a class of algorithms that mimic some of the major characteristics of Darwinian evolution. LEA has been designed in order to conceive novel small organic molecules which satisfy quantitative structure-activity relationship based rules (fitness). The fitness consists of a sum of constraints that are range properties. The algorithm takes an initial set of fragments and iteratively improves them by means of crossover and mutation operators that are related to those involved in Darwinian evolution. The basis of the algorithm, its implementation and parameterization, are described together with an application in de novo molecular design of new retinoids. The results may be promising for chemical synthesis and show that this tool may find extensive applications in de novo drug design projects.