超临界压力CO2在水平圆管内流动传热数值分析

采用SST k-w低雷诺数湍流模型对加热条件下超临界压力CO2在内径di=22.14 mm,加热长度Lh=2440 mm水平圆管内三维稳态流动与传热特性进行了数值计算.通过超临界CO2在水平圆管内的流动传热实验数据验证了数值模型的可靠性和准确性.首先,研究了超临界压力CO2在水平圆管内的流动传热特点,基于超临界CO2在类临界温度Tpc处发生类液-类气“相变”的假设,揭示了水平圆管顶母线和底母线区域不同的流动传热行为.然后,分析了热流密度qw和质量流速G对水平圆管内超临界压力CO2流动换热的影响,通过获取流体域内的物性分布、速度分布和湍流分布等详细信息,重点解释了不同热流密度qw和质量流速G下顶母线内壁温度Tw,i分布产生差异的传热机理,分析结果确定了类气膜厚度d、类气膜性质、轴向速度u和湍动能k是影响顶母线壁温分布差异的主要因素.研究结果可以为超临界压力CO2换热装置的优化设计和安全运行提供理论指导.     

石墨烯纳米网电导特性的能带机理：第一原理计算

通过第一原理电子结构计算来研究有序多孔纳米网的电导特性变化的能带机理.能带结构分析结果表明:石墨烯纳米网超晶格(3m,3n)(m和n为整数)的电子本征态在布里渊区中心点发生四重简并;碳空位孔洞规则排列形成的石墨烯纳米网具有由简并态分裂形成的宽度可调带隙,无论石墨烯的两个子晶格是否对等.在具有磁性网孔阵列的石墨烯纳米网中,反铁磁耦合使对称子晶格的反演对称性增加了一项量子限制条件,导致能带结构在K点的二重简并态分裂成带隙.通过控制网孔密度能够有效调节石墨烯纳米网的带隙宽度,为实现新一代石墨烯纳米电子器件提供了理论依据.     

浮升力和流动加速对超临界CO2管内流动传热影响

基于单相流体的概念,超临界流体的异常传热行为已经被研究很多年了,但是关于其流动传热机理仍没有统一的认识.本文通过理论分析和实验研究了超临界二氧化碳在竖直管内向上流动过程中,浮升力和流动加速效应对其流动结构和传热过程的影响.结果表明,没有确凿的实验证据表明超临界流体的异常传热行为是浮升力和流动加速直接导致的,存在的估计浮升力和流动加速效应准则均是在常物性流体的基础上,做了大量假设得出的,不同的研究者采用浮升力和流动加速准则分析超临界流体的传热恶化得出的结论不一致.最后,基于拟沸腾理论分析超临界流体的传热恶化过程,提出超临界沸腾数区分了超临界流体正常传热与恶化传热的转换边界,为超临界流体流动传热研究提供新思路,超临界沸腾数对建立用于不同技术的超临界流体动力循环的最佳运行条件具有重要意义.     

Heat conductivity and Dufour effect in the weakly ionized,magnetized, and kappa-distributed plasma

By using the generalized Boltzmann equation of transport and the first-order approximation of Chapman-Enskog expansion on the κ-distribution function, we study the thermal conductivity and Dufour effect in the weakly ionized and magnetized plasma. We show that the thermal conductivity and Dufour coefficient in the κ-distributed plasma are significantly different from those in the Maxwell-distributed plasma, and the transverse thermal conductivity and Dufour coefficient in the κ-distributed plasma are generally greater than those in the Maxwell-distributed plasma, and the Righi-Leduc coefficient and Hall Dufour coefficient in the κ-distributed plasma are also generally greater than those in the Maxwell-distributed plasma.     

Thermomagnetic properties of very heavy fermions suitable for adiabatic demagnetisation refrigeration at low temperature

ABSTRACT

With the aim to improve the performance of classical paramagnetic salts for adiabatic refrigeration processes at the sub-Kelvin range, relevant thermodynamic parameters of some new Yb-based intermetallic compounds are analysed and compared. Two main applications are considered: (i) those requiring temperature fixed-points to be reached applying magnetic fields of moderate intensity for satellite applications, and (ii) those which can be used for controlled thermal drifts in laboratory applications. Different thermomagnetic trajectories of the entropy are identified depending on respective specific heat behaviours and the constraints imposed by the Nernst postulate at the sub-Kelvin range. Some simple relationships are proposed to compare the diverse magnetocaloric characteristics of different systems. This procedure allows to include the classical Cerium-Magnesium-Nitride (CMN) salt in that comparison.     

竖直恒温面自然对流边界层不稳定性研究

在无扰动、随机式扰动以及正弦式扰动下,通过对竖直恒温面处状态Ra为1.328×10^9、Pr为6.24的自然对流进行模拟,探索了热边界层的不稳定性和共振强化自然对流换热。结果表明:(1)竖直自然对流边界层上游位置的随机式扰动对热边界层的影响主要体现在稳定阶段;(2)该状态下的竖直自然对流边界层的特征频率为15 067,且相比于无扰动状态,频率为15 067的正弦式扰动能在竖直恒温面处提高5.15%的换热量;(3)在竖直自然对流边界层上游位置加入特征频率的正弦式扰动,竖直恒温面处的局部努塞尔数Nu均出现明显波动,且波动随着边界层高度的增加而增大。     

一种新型空气源高温热泵的热力学分析

本文提出了一种供热温度为80~100℃的新型空气源高温热泵循环(EIHP),该循环采用非共沸混合工质R290/R600a,利用内部自复叠技术和喷射器提升循环性能。针对EIHP循环建立了相应的热力学计算模型,并与传统热泵循环(CHP)进行了对比研究。根据计算结果,当冷凝器出口温度为100℃,蒸发器出口温度从25℃下降到-10℃时,相较于CHP循环,EIHP循环的COP提高了15%~27%,压缩机压比降低了20%~46%,容积制热量提高了22%~51%。此外,本文还研究了冷凝器出口温度,工质配比等参数对循环性能的影响情况。     

热源塔热泵系统夏季工况优化运行实验研究

由于热源塔在冬夏季工况下的换热能力存在较大差异,按冬季工况设计的热源塔热泵系统,在夏季工况下运行时存在换热能力过剩的问题,影响系统性能。为解决上述问题,本文构建了热源塔热泵系统,实验研究了其冬夏季工况的性能差异。在此基础上,对夏季工况下的优化运行进行了实验研究,结果表明,通过调节空气和溶液流量,将热源塔的逼近度和冷幅分别控制在3.5℃和4.3℃,可使得系统性能系数由3.6提升至3.9,并对其节能机理进行了分析。     

土壤内水分流动及温度分布计算——耦合型模型

本文目的在于发展一个计算土壤内水分输送及能量交換的物理模型——耦合型模型,驱动该模型的大气条件是由实测而得的,引用对蒸发的土壤表面阻抗关联了在大气中水汽通量与从地表的蒸发,由于这种阻抗引入,计算模拟的结果与实测值达到了较好的吻合。     

Stagnation point heat transfer from laminar,high temperature methane flames

Combustion of methane-rich fuels frequently provides forced convective heating in industry, and the ability to predict the rate of heat transfer from such flames to solid surfaces is often desirable. Mathematical modelling of stagnation point heat flux has been achieved by numerical solution of the boundary layer equations, and by an analytical equation modified to include the effects of chemical reaction in the free stream flow and to allow for the enhancement in heat flux caused by the diffusion and exothermic recombination of reactive species in the boundary layer surrounding the heat receiving body. Predictions from these models have been compared with experimental data obtained in high temperature methane flames of various equivalence ratios. Within the equilibrium region of these flames, predictions from the modified analytical equation based on total Lewis numbers equal to and greater than one form a tight envelope around the experimental results, and hence provide a relatively simple method of predicting heat flux. Numerical solutions tend to slightly underestimate predictions from the analytical equation and experimental data, although agreement with the alternative prediction method increases with the surface temperature of the heat receiving body