作为BEPCII预注入器的光阴极注入器

 为了提高并且采用双束加速技术以进一步提高BEPCII正电子从直线加速器注入到储存环的速率,BEPCII(Beijing Electron Positron Collider Upgrade Project) 正在建造带有两个次谐波聚束腔的新预注入器。提出了使用光阴极注入器作为BEPCII预注入器的新方案,其性能优于次谐波聚束系统：发射度和能散至多为次谐波聚束系统的1/4,100%的传输效率,没有卫星束团的干扰,等。此外,还分别对光阴极注入器在高电荷量和低电荷量两种情况下的束流动力学进行了模拟计算和优化研究,并将其性能与正在建造的次谐波聚束系统和旧聚束系统的性能进行了比较和讨论。由此光阴极注入器产生的电子束还可以在将来用作激光-等离子体或激光-非传导性加速结构的尾场加速研究。     

提高平衡炮发射能力的初步研究

 针对平衡炮试验中所要求的发射指标超过其发射能力的具体情况,提出了两种提高平衡炮发射能力的途径,并作了相应的内弹道性能分析,目的在于提高平衡炮的使用效率,充分发挥其作为大质量试验件的有效加载工具的效能,该研究可为提高平衡炮及其它火炮的发射能力提供依据和参考。     

Characteristics of terahertz coherent transition radiation generated from picosecond ultrashort electron bunches

This paper presents a method of generating terahertz (THz) coherent transition radiation (CTR) from picosecond ultrashort electron bunches including single and train bunches, which are produced by a photocathode radio frequency gun. The radiation characteristics of THz CTR including formation factor and energy spectrum are analysed in detail. With the help of a 2-dimensional particle-in-cell simulation, the radiation characteristics including power, energy and magnetic field are analysed. The results show that the radiation frequency can be adjusted by tuning the repetition frequency of the train bunch and the energy can be enhanced with the train bunches.     

多聚焦极栅控电子模拟源的研究

采用电子光学软件设计模拟了一种长焦距多聚焦级的电子枪结构.利用电子透镜原理分析多聚焦极电子枪的电子束斑产生,依据不同栅控电压,分析零场模式、拒斥场模式和肖特基场模式3种阴极电子发射方式下电子聚焦情况.模拟结果表明:拒斥场模式和肖特基场模式对电子束流密度分别有减弱和增强的作用;当聚焦极电压比U1∶U2∶U3∶U4∶U5=5∶8∶15∶70∶100时,能量为30keV的电子束焦斑最小,在10m处焦斑大小为160mm.     

三级炮加载技术在超高压状态方程研究中的应用

根据阻抗梯度飞片设计原则和超高速数值模拟技术设计出一种新的叠层波阻抗梯度飞片,并利用三级炮加载技术将Ta飞片加速至9 km/s以上,测量了Ta在超高压下的状态方程。三级炮实验实现了冲击波速度与粒子速度的同时测量,Ta的Hugoniot数据与文献中发表的数据具有很好的线性关系,说明三级炮加载技术适合于材料超高压状态方程研究。     

铁电介质阴极电子枪

 给出并分析了铁电介质阴极电子枪的初步数值模拟和实验结果。实验表明其发射电子密度可达110A/cm²。该种电子枪产生的电流密度大于阴极发射电子初始能量为零时的空间电荷限制电流,PIC数值模拟结果表明可以通过给发射电子赋予一定的初始能量来解释这一现象,理论分析认为铁电介质阴极发射电子具有初始能量是合理的。     

Design study of a L-band DC photocathode gun

In this paper, we the design study of a L-band DC photocathode gun injector for the ERL (Energy Recovery Linac) test facility. The main parameters of the injector are energy of 2.3 MeV, a bunch length of 2 ps, and a normalized emittance of 2.1 mm.mrad.     

Time domain identification and ranking of noise sources in a pneumatic nail gun

This paper investigates the noise sources in a pneumatic nail gun. The study combines two complementary experimental approaches. The first uses simultaneous data observation, with sound, acceleration and air pressure signals simultaneously recorded in conjunction with a nail gun motion high speed video. This strategy allows the identification of the physical processes involved in the operation of the machine at different time instants, as well as the associated noise generation mechanisms. However, since multiple noise sources radiate at the same time, this observation technique is not sufficient for noise source identification and ranking. Thus, a second approach introduces a selective wrapping procedure, and the strategy assures a reliable classification of the noise sources. The investigation considers the following noise origins: the air exhaust, the machine body and the workpiece/worktable.     

电子束蒸发沉积Ir膜真空紫外反射特性

Ir是一种重要的真空紫外反射材料,在太阳物理、宇宙物理、生命科学、大气物理、同步辐射等方面有着十分重要的应用.对电子束蒸发沉积Ir膜在真空紫外波段的反射特性进行了系统的理论和实验研究.根据吸收材料基底上单层金属膜数学计算模型,对不同基片上各种厚度的Ir膜真空紫外反射率进行了优化计算.根据计算和前期实验结果,采用电子束蒸发方法,在石英、K9玻璃基片上沉积了不同厚度的Ir膜,在入射波长120 nm处获得了近30%正入射反射率,对应的Ir膜厚度为12 nm.过厚或过薄均不利于Ir膜反射率的提高.经退火处理后,Ir膜中张应力有所释放但并未消除,同时晶粒平均尺寸显著增大,反射率下降.     

Bunch length measurement at Tsinghua Thomson scattering X-ray source

The length of electron beam from a photocathode RF gun is determined by a spectrometer, according to the relative energy spread induced by the bunch length during the acceleration in a linac. For a photocathode RF gun, different laser injected phase and beam charge are studied. The compression is changed for the different laser phases, as from 10° to 30°, and the bunch length is lengthened due to the strong longitudinal space charge force, caused by the increased charge.