Stabilization of Graphite Nitrate by Intercalation of Organic Compounds

New thermally stable intercalation compounds of graphite were obtained by the further intercalation of a series of organic compounds into graphite nitrate. The stabilization is explained by the formation of hydrogen bonds between the protonated form of the modifying substance and neutral surrounding molecules.     

Facile synthesis of exfoliated and highly conductive poly(arylene disulfide)/graphite nanocomposites

Exfoliated graphite has been synthesized by first synthesizing H₂SO₄ intercalated compound in a H₂O₂‐H₂SO₄ mixture, followed by exfoliation under microwave irradiation. Poly(arylene disulfide)/graphite nanocomposites were then fabricated by absorbing cyclic(arylene disulfide) oligomers into the pores of exfoliated graphite. Subsequently, the nanocomposite precursor was subjected to heat treatment to carry out the in situ ring‐opening polymerization of the oligomers via free radical mechanism. The as‐prepared nanocomposite exhibited a exfoliated nanostructure as evidenced by transmission electron microscopy (TEM) observation. The nanocomposite with a very small amount of graphite, 5 wt%, possesses a highly electrical conductivity of 4 S/cm, therefore, many applications can be found as conductive materials. Copyright © 2004 John Wiley & Sons, Ltd.     

Pore size distributions in low‐k dielectric thin films from X‐ray porosimetry

X‐ray reflectivity has been used to determine the mass uptake of probe molecules in porous thin films supported on thick silicon wafers. The adsorption occurs by capillary condensation when the films are exposed to probe vapor at controlled partial vapor pressures. The probe solvent partial pressure was varied by mixing saturated air and dry air at constant temperature or by changing sample temperature at a constant vapor concentration. Pore size distribution in the films can be calculated from the probe uptake with typical porosimetric approaches such as the application of the Kelvin equation to convert partial pressure into pore size. For illustration, the pore size distribution of three different nanoporous thin films, the primary candidate of ultra‐low‐k interlevel dielectrics in the next generation of integrated circuit chips, was determined with this technique. These samples represent different generations of low‐k dielectrics developed by industry. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2170–2177, 2002     

负载型无铬超细铁基变换催化剂的制备和催化性能

 以镁铝尖晶石为载体，以过渡金属氧化物为助剂，用吸附γ－Fe2O3胶体法制备了负载型无铬铁基变换催化剂．TEM，XRD，BET和活性测试结果表明，采用胶体负载法制备的变换催化剂，其活性组分Fe3O4以分立的超细微颗粒分布在镁铝尖晶石载体表面上，颗粒之间存在一定的间隔．过渡金属氧化物NiO或V2O5能够进入Fe3O4晶格形成固溶体，起到代替氧化铬的作用，提高催化活性．负载型催化剂FeNi／MgAl2O4（m（NiO）／m（Fe2O3）＝3％）在汽／气比为1和空速为2000h－1的反应条件下，CO转化率在400和350℃时分别为95％和80％；在高空速和低汽／气比条件下也具有很好的催化性能．稳定性实验结果表明，该催化剂 具有良好的热稳定性和一定的抗硫能力．与非负载型催化剂相比，负载型催化剂具有更为优越的催化性能．     

球形钴酸锂的乳液法合成及其结构、性能研究

采用一种特殊乳液法, 制备了锂离子电池正极材料球形LiCoO₂. 分别研究了一次颗粒尺寸、烧结时间对于二次造粒的影响. 还对LiCoO₂球体内部的结构进行了SEM和HRTEM研究, 发现一次颗粒非常紧密地融合在一起, 晶体边界区域没有明显的非晶相区, 也没有纳米级别的孔洞、裂缝. 电化学性能研究表明, 在900 ℃烧结4 h的材料具有较高的首次放电容量(143 mAh•g^－1)和良好的循环性能     

CuO/ZnO/Al2O3合成甲醇催化剂制备方法

ＣｕＯ／ＺｎＯ／Ａｌ２Ｏ３合成甲醇催化剂的制备方法吴晓晖刘金尧刘崇微朱起明（清华大学化学系一碳化工国家重点实验室，北京１０００８４）何菲（天津大学化工系一碳化工国家重点实验室，天津３０００７２）关键词氧化铜，氧化锌，氧化铝，超细粒子，草酸盐胶体...     

酞菁铜与Q-CdS超微粒子界面的光致电荷转移研究

半导体超微粒子与有机分子界面的光致电行转移过程是当前光化学和材料科学研究的一个活跃领域［‘，2］；研究的目的主要有两个方面，一是研究半导体超微粒子表面光致电行转移的特性；二是研究有机分子对超微粒子的光敏化作用．目前，超微粒子的功能化研究日益深入，其独特的光     

Spin interaction with an ideal Fermi gas

We consider the equilibrium dynamics of a system consisting of a spin interacting with an ideal Fermi gas on the lattice , 3. We present two examples: when this system is unitarily equivalent to an ideal Fermi gas or to a spin in an ideal Fermi gas without interaction between them.     

The effectivity of solvents as electron pair donors

The effectivity of solvents as electron pair donors, their donicity as expressed by their donor numbers DN, is reexamined. The linear dependence of the enthalpy and the Gibbs free energy for the reaction of donor solvents with antimony pentachloride is affirmed. Extension of the DN scale by other measured quantities, via their linear correlations for sets of solvents where both kinds of data are known is applied to Drago's E-C scale, Kamlet's scale, and Koppel's B scale. This extension, added to previous extensions employing Selbin's D_{I, II} and Popov's ²³Na, produces a DN scale for 170 solvents. The relation of DN measured for isolated solvent molecules in 1,2-dichloroethane to DN values measured for bulk solvents is examined by means of the scaled particle theory and solute-solvent interaction terms. A scale of normalized donor numbers DN ^N is presented. These values are practically the same as the scale, and for those solvents for which DN values are presented here and values are lacking, they can serve in their place for those preferring to use the scale for donor solvents.     

低硫可膨胀石墨的制备

低硫可膨胀石墨的制备宋克敏，路文义，高淑英，阎秋燕（河北教育学院石家庄０５００９１）关键词低硫可膨胀石墨，制备，过氧化氢，硫酸柔性石墨具有耐高温、耐酸碱、抗拉、抗压、抗辐射、回弹性等优良性能，被广泛应用于化工、机械、肮天、原子能等领域。但其原材料可膨...