Anelastic relaxation of Pr1/2Ca1/2MnO3 at low and medium frequencies in the 350–500 K range

In previous works (Jornadas SAM 2000; J. Magn. Magn. Mater. 226–230 (2001) 988) the low-frequency anelastic effects of two manganite perovskites of La_2/3Sr_1/3MnO₃ and La_2/3Ca_1/3MnO₃ were studied at 1 Hz and temperatures above those of the metal–insulator transition. An important internal friction peak (P1) appears at 414 and 419 K, respectively, with a modulus variation and no appreciable contribution to electrical resistivity. Another compound Pr_1/2Ca_1/2MnO₃ of the same family has been studied by anelastic mechanical spectroscopy in order to add new data which could elucidate the (P1) peak mechanism. The measurements were made in a sub-resonant forced pendulum (0.1–20 Hz) and in a vibrating reed equipment (kHz range). A stable (P1) peak has been detected at 410 K (1 Hz), with a corresponding modulus step. The appearance of this relaxation peak in the Pr_1/2Ca_1/2MnO₃ compound, and its high activation energy value, similar to the other compounds measured, indicates that the microscopic origin of this relaxation does not correspond to an oxygen jump (characteristic activation energy0.8–0.9 eV).     

Dielectric relaxation and ac conductivity of sodium tungsten phosphate glasses

Studies of dielectric relaxation and ac conductivity have been made on three samples of sodium tungsten phosphate glasses over a temperature range of 77–420 K. Complex relative permitivity data have been analyzed using dielectric modulus approach. Conductivity relaxation frequency increases with the increase of temperature. Activation energy for conductivity relaxation has also been evaluated. Measured ac conductivity (σ_m(ω)) has been found to be higher than σ_dc at low temperatures whereas at high temperature σ_m(ω) becomes equal to σ_dc at all frequencies. The ac conductivity obeys the relation σ_ac(ω)=Aω ^S over a considerable range of low temperatures. Values of exponent S are nearly equal to unity at about 78 K and the values decrease non-linearly with the increase of temperature. Values of the number density of states at Fermi level (N(E _F)) have been evaluated at 80 K assuming values of electron wave function decay constant α to be 0.5 (Å)^?1. Values of N(E _F) have the order 10²⁰ which are well within the range suggested for localized states. Present values of N(E _F) are smaller than those for tungsten phosphate glasses.     

Calculating vibrational mode contributions to sound absorption in excitable gas mixtures by decomposing multi-relaxation absorption spectroscopy

Sound relaxational absorption spectroscopy of excitable gas mixtures is potentially applied for gas composition detection. The relaxation of vibrational modes of gas molecules determines the sound relaxational absorption. However, to our knowledge, the contribution of each vibrational mode available in gas mixtures to sound multi-relaxation absorption has not been calculated in existing literature. In this paper, based on the decoupled expression of the effective isochoric molar heat for a gas mixture, a sound multi-relaxation absorption spectrum is decomposed into the sum of single-relaxation spectra. From this decomposable characteristic, the contribution of each vibrational mode available in the gaseous medium to the multi-relaxation absorption is obtained at room temperature. For various gas compositions including carbon dioxide, methane, nitrogen etc., the calculated contributions of vibrational modes are verified by the comparison with experiment data. We prove the following views with quantifiable outcomes that the primary molecular relaxation process associated with the lowest mode plays the major role in acoustic relaxational absorption of gas mixtures; the mode with lower vibrational frequency provides higher contribution to the primary relaxation process. This work could provide a deeper insight into the relationship between the sound relaxational absorption spectroscopy and gas molecules.     

First-principles study for the atomic structures and electronic properties of PbTiO3 oxygen-vacancies (0 0 1) surface

The structural and electronic properties of fully-relaxed PbTiO₃ (0 0 1) oxygen-vacancy surface with PbO and TiO₂ terminations are investigated by first-principles calculations. In contrast to the perfect surface, the smaller surface rumples and interlayer distances have been found. The largest relaxation occurs on the second layer atoms not on the surface layer ones, and some in-gap Ti 3d states at about −1.1 eV below the Fermi-level are observed in the TiO₂-terminated surface caused by oxygen-vacancies. For the PbO-terminated surface, some in-gap Ti 3d states and Pb 6p states also move into the bulk midgap region to become partially occupied, and two different chemical states of the Pb 6s states were found. One is attributed to the bulk perovskite Pb atoms and another one is caused by the relaxation of surface Pb atoms. These theoretical results would give a good reference for the future experimental studies.     

A multi-scale Monte Carlo study of oxide structures on the Cu(1 0 0) surface

We present a multi-scale Monte Carlo study of the oxidation of the Cu(1 0 0) surface based on the Bortz-Kalos-Lebowitz model with the equilibrium energetics obtained from ab initio calculations. The radial and island size distribution functions are examined and Cu-O structures are analyzed at different temperatures and coverages. We concentrate on the coverages of 0.3 monolayer O or less, with variable sub-monolayer coverages of Cu. The results show that even though the ab initio calculations yield a higher barrier for O than for Cu adatom diffusion on Cu(1 0 0), the stability of Cu structures causes the O adatoms to be more mobile on the Cu(1 0 0) surface than the Cu adatoms. We are able to reproduce the c(2 × 2)-O domains seen in the experiments. However, we give an alternative explanation based on the repulsive interactions of O that, on one hand, cause the local ordering and, on the other hand, prohibits large well-ordered domains. We also give interpretation on the formation of the R45°-O reconstruction of Cu(1 0 0) above the O coverages of 0.3 monolayer based on the ab initio energetics.     

Thermal behaviour of two anti-inflammatory drugs (celecoxib and rofecoxib) and slow relaxation dynamics in their amorphous solid state. Comparison between the dynamic fragility obtained by dielectric spectroscopy and by thermostimulated currents

This study of the thermal behaviour of two glass formers showed that rofecoxib has a good ability to vitrify while celecoxib displays a moderate glass forming ability. On the other hand, celecoxib forms an instable glass while rofecoxib displays moderate glass stability. The α-relaxation of the two amorphous drugs was studied by differential scanning calorimetry (DSC) and thermally stimulated depolarization currents (TSDC). The values of the dynamic fragility obtained by the two techniques are in good mutual agreement and suggest that both drugs are moderately fragile glass formers. These values are however considerably lower than those obtained by dielectric relaxation spectroscopy (DRS) and published in the literature. In the present work we will compare the values of the dynamic fragility obtained by TSDC and DRS for a set of ~30 glass-forming liquids, in order to evaluate their relative suitability for the determination of the m-index. The observed differences are discussed and interpreted. Finally, secondary mobility modes were detected by TSDC in both celecoxib and rofecoxib. The kinetic parameters are identical in both cases and similar to those found by DRS for the slow-b relaxation of celecoxib. These secondary relaxations, that are precursors of the main relaxation on its lower temperature side, are believed to be Johari-Goldstein relaxations.     

The Asymmetric One-Dimensional Constrained Ising Model: Rigorous Results

We study a one-dimensional spin (interacting particle) system, with product Bernoulli (p) stationary distribution, in which a site can flip only when its left neighbor is in state +1. Such models have been studied in physics as simple exemplars of systems exhibiting slow relaxation. In our East model the natural conjecture is that the relaxation time (p), that is 1/(spectral gap), satisfies log (p) as p0. We prove this up to a factor of 2. The upper bound uses the Poincaré comparison argument applied to a wave (long-range) comparison process, which we analyze by probabilistic techniques. Such comparison arguments go back to Holley (1984, 1985). The lower bound, which atypically is not easy, involves construction and analysis of a certain coalescing random jumps process.     

Enthalpy Relaxation Study of Poly(Vinyl Chloride) Films Based on the Time-Temperature Superposition Principle

Abstract

In the enthalpy relaxation of poly(vinyl chloride), a decrease in enthalpy upon the isothermal ageing was measured using the differential scanning calorimetry method as a function of ageing time (t_A) and ageing temperature. The range of the ageing temperature was from 56?°C (T_g ? 25?°C) to 72?°C (T_g ? 9?°C) where T_g denotes the glass transition temperature. The limiting value of the decrease in enthalpy was determined by applying a stretched exponential function to the measured enthalpy data. The relaxation function (?) was derived from the measured enthalpy and the construction of a master curve was tried by shifting the ? ? t_A curves of the respective ageing temperatures horizontally. Although there was no agreement between the shift factors (a_T) and the relaxation times of the ? ? t_A curves, the superposition was successfully constructed and the a_T values obtained for the poly(vinyl chloride) sample were found to be comparable to those reported for viscoelastic experiments over a broad temperature range above and below T_g carried out for different polymers. The origin of the decrease in enthalpy was briefly discussed in terms of the chain dynamics in the isothermal condition.     

Change in motor cortex activation for muscle release by motor learning

For central nervous system disorders'' rehabilitation, it is important to accurately understand motor control and implement an appropriate motor learning process to induce neuroplastic changes. The neurophysiological studies have revealed that neural control mechanisms are crucial during both the onset of muscular activities and muscle release after contraction. When performing various movements during daily activities, muscle relaxation control enables precise force output and timing control. Moreover, surround inhibition is a functional mechanism in the motor system. Surround inhibition of the motor system may be involved in the selective execution of desired movements. This review demonstrates cortical excitability resulting from motor learning, movement control mechanisms including muscle relaxation and the suppression of nontarget muscle groups, and the voluntary drive''s importance that is required for movement.     

Oxygen relaxation and phase transition in GdBaCo2O5 + δ oxide

Electrical conductivity, internal friction techniques and dilatometer have been used to investigate the oxygen relaxation, phase transition and thermal expansion behavior of GdBaCo₂O_5 + δ. The main electronic charge carriers in GdBaCo₂O_5 + δ are electronic holes, which could be assigned to the formation of Co⁴⁺. The oxygen exchange kinetics intensely depends on oxygen partial pressure and is also closely related to temperature. Both electrical conductivity and internal friction give rise to an abnormal at about 75 °C, which are related to the insulator-metal transition occurring in GdBaCo₂O_5 + δ. One large relaxation internal friction peak, due to the motion of oxygen within Gd-O plane, is also found in the oxide. The average thermal expansion coefficient (TEC) of GdBaCo₂O_5 + δ is about 21.4 × 10⁻⁶ K⁻¹ between 500 °C and 900 °C.