彩色透明微晶玻璃的吸收光谱

在Li2O-Al2O3-SiO2系统玻璃中掺入少量晶核剂TiO2,ZrO2,P2O5，再掺入稀土离子和过渡金属离子作为着色剂，在高温下溶制得到彩色透明玻璃，对上述玻璃进行微晶化处理，用差热分析（DTA）确定其晶化温度，测定与讨论了所获彩色透明微晶玻璃在紫外波段至近红外波段的吸收光谱特性，研究结果表明，玻璃微晶化后，由于基质玻璃对光的微弱散射，引起吸收的增强，但不改变稀土离子和过渡金属离子的本征吸收峰位。     

Widely tunable long-period fiber grating with nm-thick higher refractive index film overlay

By introducing a four-layer step-index waveguide modeling, the characteristics of long-period fiber grating (LPFG) with an nm-thick film overlay, which has higher refractive index than that of fiber cladding are investigated in detail. The influence of both the overlay thickness and refractive index on the tuning ability of LPFG is analyzed. The numerical results demonstrate that spectral response of LPFG is divided into three distinct regions as the overlay deposition increases and the shift of resonant wavelength is drastic in some special thickness range. In conjunction with higher-order cladding mode coupling and fiber cladding etching, the sensitivity of LPFG to the overlay refractive index is enhanced significantly and over 120 nm resonant wavelength tunable range is achieved.     

Simultaneous Measurement of Particle Size and Particle Velocity by the Spatial Filtering Technique

The objective of this study was to compare the measuring results of a fiber‐optical probe based on a modified spatial filtering technique with given size distributions of different test powders and also with particle velocity values of laser Doppler measurements. Fiber‐optical spatial filtering velocimetry was modified by fiber‐optical spot scanning in order to determine simultaneously the size and the velocity of particles. The fiber‐optical probe system can be used as an in‐line measuring device for sizing of particles in different technical applications. Spherical test particles were narrow‐sized glass beads in the range 30–100 μm and irregularly shaped test particles were limestone particles in the range 10–600 μm. Particles were dispersed by a brush disperser and the measurements were carried out at a fixed position in a free particle‐laden air stream. Owing to the measurement of chord lengths and to the influence of diffraction and divergent angle, the probe results show differences from the given test particle sizes. Owing to the particle‐probe collisions, the mean velocity determined by the probe is smaller than the laser Doppler mean velocity.     

应用LiNbO_3声表面波驱动的全光纤声光频移器

介绍一种工作在10.7MHz的全光纤声光频移器.它由在LiNbO_3基片上制作的叉指电极换能器产生的声表面波驱动.当驱动电功率1.5W时,频移光转换效率达35％.     

Acousto-optic mode coupling of partially coherent light in two-mode optical fibers

An acoustic pulse propagating on a two-mode fiber can act as a beam splitter in a scanning interferometer. When this device is employed in white-light interferometry, the effects of distributed coupling and dispersive interferometer arms need to be considered. A theory suitable for treating acousto-optic interaction of partially coherent light in a moving interaction region was developed. It was found that differential optical dispersion should be negligible and the acoustic pulse length short. Also the coherence time should be short but long compared to the intermodal group delay difference over a pulse length. Experiments with long acoustic pulses were performed, and fairly good agreement with theory was obtained.     

时分复用倍乘光脉冲重复率的新型光纤耦合器环状连接法分析

提出并详细分析了一种基于时分复用技术倍乘光脉冲重复率的方法：在２×２光纤耦合器的一个输入口与一个输出口间，接入时延为脉冲列半周期奇数倍的一段光纤使之形成环状连接循环耦合，而在另一输出口获得光脉冲。详细分析了该系统中光纤耦合器耦合比、插入损耗、时延光纤长度的要求，偏差的影响及其调节法，给出了理论公式、结果的计算机模拟与实验介绍；与经典的马赫陈德尔干涉仪接法及近年提出的Ｓａｇｎａｃ环接法进行了比较。该方法特别适用于对窄脉冲列进行串接复用实现重复率的多次倍乘，从而得到数千兆赫至上百千兆赫的高重复率光脉冲     

Optical current transducers using flint glass fiber as the faraday sensor element

This paper describes development of the optical current transducers using flint glass fiber as the Faraday effect sensing element. Excellent polarization properties of the fiber with low birefringence are described, and the design and test data of a current transducer using the fiber manufactured for use in electric power facilities are reviewed. Experimental results on flexible characteristics of a scheme with round trip light transmission in the fiber is also reported.     

基于变芯径光纤的光学系统在光造型中的应用

光学系统采用变芯径光纤，可大幅度提高光的传输效率，增加光学子系统柔性。描述了光造型工作原理及其理论依据，在介绍所研制的光的成型系统光学子系统的基础上，阐述了紫外光源的选择与设计，及变芯径光纤的设计、传输、耦合与聚焦等技术。该套基于变芯径光纤的光学子系统成本低、体积小、效率高，巳成功应用于所研制的台式低成本快速成型系统中，为该系统的进一步推广奠定了技术基础。     

含氰基的酚醛树脂及其碳纤维复合材料

含氰基的酚醛树脂，具有优异的耐高温性能和高温下的机械强度，在３１５℃下性能变化甚小；不着火，发烟量低，有良好的加工成型性能。热固化过程中氰基成三嗪环而交联，没有小分子脱出，是一类具有广泛发展前景的新型热固性树脂。     

Carbon–epoxy composites based on fibers coated with nylon 6,6: hygrothermal ageing versus interlaminar shear strength

Carbon fibers were coated in situ with a thin film of polyhexamethylene adipamide by an interfacial polycondensation technique. The modified fibers were used for the preparation of epoxy-based unidirectional composites. Specimens of these materials were immersed in water until equilibrium conditions were attained. The weight gain at equilibrium was determined as a function of the immersion temperature, the fiber volume fraction and the polyamide content deposited on the fibers. Water penetration in specimens made with uncoated carbon fibers increases when the volume fraction decreases. Introduction of the polyamide interlayer initially increases the water absorption, but reduces it at higher immersion temperatures and/or higher polyamide contents. The treated specimens were subjected to the short beam test to determine the interlaminar shear strength (ILSS). The data show that the ILSS decreases with water penetration but increases when the immersion temperature increases from 40 to 70°C. The overall performance encountered is discussed in terms of the possible roles of the polyamide interphase while taking into account mechanisms concerned with matrix plasticization, interphase degradation and residual stress relaxation.