Changes in the spectrum of Gaussian Schell-model beams propagating through turbulent atmosphere

Based on the extended Huygens-Fresnel principle, the spectrum of Gaussian Schell-model (GSM) beams propagating through turbulent atmosphere is derived analytically. It is shown that, if the scaling law is valid, the normalized spectrum S(ω) of GSM beams propagating through turbulent atmosphere is the same as the normalized source spectrum S⁽⁰⁾(ω), whether GSM source is quasi-homogenous or not. On the other hand, if the scaling law fails, S(ω) of GSM is different from S⁽⁰⁾(ω). The structure constant of the refractive index, transverse coordinate of observation point and spatial correlation length of the source affect the spectrum, which is illustrated numerically.     

Plasticity field adjacent to faces of asperities on a rotating roll after initial indentation into a half-space

The plastic deformation field near the horizontal surface of a half space of perfectly plastic material associated with an indenting rotating rigid tooth is studied using slip line theory. The tooth is one of many on a roll surface and indents first into the half-space material and then rotates about the roll center. A slip line field is proposed for the deforming plastic region and a solution scheme is outlined. The emphasis is on determining the shape of the deforming region, especially that of the free surface. The study has a potential application in roughness transfer in metal forming processing.     

Duffing方程的唯三周期解问题

考虑Duffing方程x+g(x,t)=h(t),在g(x,t)满足简单的凸凹性条件。以及g＇(x,t)跨越第一共振点时,本文指出,当强迫振动项h(t)充分小时,所讨论的Duffing方程的2π周期解恰有三个.     

Monte Carlo方法研究低能电子束曝光沉积能分布规律

建立一个描述低能电子在多元多层介质中散射的物理模型,运用MonteCarlo方法模拟低能电子在靶体胶衬底中的复杂散射过程,在此基础上通过大量计算研究入射束能、胶层厚度、衬底材料等不同曝光条件对抗蚀剂沉积能密度分布的影响,获得沉积能分布规律:适量的低束能、薄胶层、低原子序数衬底可以使前散射电子对胶中沉积能密度分布的贡献增大、背散射电子的贡献减小,从而提高曝光分辨率. 关键词： 电子束曝光 MonteCarlo方法 低能电子散射 能量沉积     

Tesla变压器型电子束加速器初步实验

 介绍了一种Tesla变压器型的强流电子束加速器。当变压器初级输入20kV左右的电压时，加速器二极管输出电压500kV，电流9kA，信号脉宽大约50ns，该装置具有结构简单，安装方便，运行可靠等特点。     

Comparison of the boundary theory with the contact rule of phase regions and Gupta’s method

The phase boundary theory and the contact rule of phase regions are compared, and some weaknesses of the latter are manifested. The comparison between the Gupta’s method and the boundary theory method for constructing multicomponent isobaric sections is also presented.     

Pulsed laser deposition of nanostructured Ag films

Ultra-thin (0.5-5 nm) films of Ag have been prepared by pulsed laser deposition in vacuum using a 26 ns KrF excimer laser at 1 J cm⁻². The deposition was controlled using a Langmuir ion probe and a quartz crystal thickness monitor. Transmission electron microscopy showed that the films are not continuous, but are structured on nanometer size scales. Optical absorption spectra showed the expected surface plasmon resonance feature, which shifted to longer wavelength and increased in strength as the equivalent film thickness was increased. It is shown that Maxwell Garnett effective medium theory can be used to calculate the main features of optical absorption spectra.     

人力资本培训投资的博弈分析

针对人力资本组合投资模式仅定性分析职员和企业对人力资本投资行为的特点，应用博弈论进行了相应的定量分析，将贝克尔投资模式与组合投资模式相结合，建立了确定企业投资比率的计算公式，为企业进行人力资本培训投资提供了定量的决策依据。     

Growth and characterization of model oxide catalysts

Oxide catalysts are frequently used to convert toxic species to environmentally benign molecules, and to prevent the formation of toxic species in the first place. In this paper, growth and characterization of model oxide systems employed in both approaches is discussed. An example of the former approach is the selective catalytic reduction (SCR) of NO emitted from power plants by NH₃, which employs tungsten and vanadium oxides supported on the anatase polymorph of TiO₂. To model SCR catalysts, epitaxial titanium, vanadium and tungsten oxide films were grown using molecular beam epitaxy and magnetron sputtering. Two different anatase orientations were grown on LaAlO₃ substrates and their interactions with vanadia were characterized. On LaAlO₃ (0 0 1), anatase exposed a (4 × 1) reconstructed (0 0 1) surface. Vanadia lifted the reconstruction and at 1 ML a (1 × 1) surface with mostly V⁵⁺ was observed. Continued V₂O₅ growth led to loss of order, but at high temperatures epitaxial VO₂ could be grown; vanadia behaved similarly on anatase films on LaAlO₃ (1 1 0). Results suggested that the monolayer is pseudomorphic with O adsorption oxidizing the surface V to 5+, since the anatase structure cannot accommodate more bulk oxygen, only a monolayer can be pseudomorphic and have only V⁵⁺. Thus the vanadia monolayer has unique structural and chemical properties that can help explain why vanadia monolayers on TiO₂ are much more active than bulk V₂O₅. For WO₃, a series of added row reconstructions were observed as the epitaxial films were reduced. The effect of these structures on surface chemistry was characterized by studying 1-propanol adsorption. The results indicated that the structure of the WO₃ surface did not alter its catalytic function but had a strong effect on reaction kinetics. As an example of a system where catalysts prevent the formation of toxic species, the reactivity of oxidized Pd surfaces used in CH₄ catalytic combustion were studied. An ordered PdO-like monolayer was found to be less reactive towards CO than adsorbed O on Pd. On the other hand, the PdO layer favored a lower activation energy C₃H₆ oxidation pathway. The results indicated that Pd oxidation reduces the sticking coefficient of reactive species but once molecules adsorb, the oxide surface can reduce the activation energy for subsequent reaction.     

Error estimation,adaptivity and data transfer in enriched plasticity continua to analysis of shear band localization

In this paper, an adaptive FE analysis is presented based on error estimation, adaptive mesh refinement and data transfer for enriched plasticity continua in the modelling of strain localization. As the classical continuum models suffer from pathological mesh-dependence in the strain softening models, the governing equations are regularized by adding rotational degrees-of-freedom to the conventional degrees-of-freedom. Adaptive strategy using element elongation is applied to compute the distribution of required element size using the estimated error distribution. Once a new mesh is generated, state variables and history-dependent variables are mapped from the old finite element mesh to the new one. In order to transfer the history-dependent variables from the old to new mesh, the values of internal variables available at Gauss point are first projected at nodes of old mesh, then the values of the old nodes are transferred to the nodes of new mesh and finally, the values at Gauss points of new elements are determined with respect to nodal values of the new mesh. Finally, the efficiency of the proposed model and computational algorithms is demonstrated by several numerical examples.