高维Mbius群的分类、生成系统和离散准则

本文利用高维Ｍｏｂｉｕｓ变换的Ｃｌｉｆｆｏｒｄ矩阵表示，给出了高维Ｍｏｂｉｕｓ子群的一个分类定理，证明了非初等子群的最小纯斜驶生成系统的存在性，得到了一条离散准则。     

Vertex function and coupling constant for the virtual decay of7Li

The alpha-triton relative wave function with various nucleon exchange contributions and their asymptotic normalization are considered in the framework of the generator coordinate method (GCM). The asymptotic normalization of relative wave function provide the estimate of the coupling constant. The relative wave function is also used to obtain⁷Li-α-t vertex function in the virtual decay of⁷Li. The extrapolation of vertex function for negative values ofq ² up to the alpha-triton pole provide the vertex constant, which is compared with the experimentally determined estimates 0.67 FM and 0.72 FM. Our calculated value is 0.656 FM which is in close agreement with the above estimates.     

On characterization and perturbation of local -semigroups

Let be a -group with generator , and let be a local -semigroup commuting with . Then the operators , , form a local -semigroup. It is proved that if is injective and is the generator of , then is closable and is the generator of . Also proved are a characterization theorem for local -semigroups with not necessarily injective and a theorem about solvability of the abstract inhomogeneous Cauchy problem:

     

共线式热电发电机在侧面散热情况下的性能

热电材料是一种环境友好型功能材料,其可以实现热能与电能的相互转化,在热电发电、热电制冷中具有许多应用.传统的热电发电机为$\pi$型结构,要求热电腿的长度相等,在某些情况该结构不利于热电发电机的优化设计.热电发电机在高温工况下会引起强烈的热应力甚至应力集中,从而缩短了其工作寿命.另外,热电发电机的工作温度于环境温度,这样必然会有一部分热量散失到环境中,从而影响热电发电机的性能.针对该现象,本文建立了考虑散热的新型共线式热电发电机模型,该模型的热电腿可以独立进行优化,基于有限元方法,对考虑侧面散热的共线式热电发电机进行了仿真模拟,分析了其在狄利克雷边界条件下的热电性能和力学性能,得到了热电发电机的温度场、电势场、应力场,探究了不同强度的对流散热系数对热电发电机热电性能和力学性能的影响.结果表明,对流散热会降低热电发电机的能量转化效率,当对流换热系数达到~100W/(m$^{2}\cdot$\textcelsius) 时,效率为~0.0479,该值比绝热状态的转化效率0.066 7 低28%.对流散热使热电发电机侧面热损失增加,降低了热应力.在实际应用中,应合理优化设计隔热系统,提高能量的转化效率.      

电热炮原理性实验研究

本文介绍了电热炮的基本原理、实验装置结构、等离子体发生器和发射实验结果。实验结果表明,电热炮原理实验的装置是成功的,已将19.3g复合弹丸加速到1.85km/s,穿透30mm厚的钢板。     

Bifurcation and chaos of a simple walking model driven by a rhythmic signal

The walk of animals is achieved by the interaction between the dynamics of their mechanical system and the central pattern generator (CPG). In this paper, we analyze dynamic properties of a simple walking model of a biped robot driven by a rhythmic signal from an oscillator. In particular, we examine the long-term global behavior and the bifurcation of the motion that leads to chaotic motion, depending on the model parameter values. The simple model consists of a hip and two legs connected at the hip through a rotational joint. The joint is driven by a rhythmic signal from an oscillator, which is an open loop. In order to analyze the bifurcation, we first obtained approximate solutions of the walking motion and then constructed discrete dynamics using the Poincaré map. As a result, we found that consecutive period-doubling bifurcations occur as the model parameter values change, and that the walking motion leads to chaotic motion over the critical value of the model parameters. Moreover, we approximately obtained the period-doubling solutions and the critical value by employing a Newton-Raphson method. Our analytical results were verified by the numerical simulations.     

Correlation of swirl number for a radial-type swirl generator

An experimental investigation was undertaken to derive a new correlation for the swirl number of a radial-type swirl generator under various Reynolds numbers and various vane angle conditions. A radial-type swirl generator with 16 rotary guide vanes was used to generate an annular swirling jet flow. The Reynolds numbers ranged from 60 to 6000, and the vane angles from 0° to 56°. Quantitative measurements for the velocities were made by using an optical method of laser-Doppler anemometry (LDA). Three-component velocity profiles of axial, radial, and azimuthal components at the swirling jet exit were measured for various flow conditions. A flow visualization method using smoke-wire and still photography was also applied to observe the flow patterns of the recirculation region behind the circular bluff body. Under low Reynolds number conditions, the swirl strength was found to be strongly dependent on the Reynolds number as well as on the guide vane angle. Based on the experimental results, a modified swirl number S is derived to characterize the swirling flow, which is useful for the design of a swirl generator.     

Subsonic Radiation Gas Dynamics in a Laser Plasma Generator Channel

The radiation gasdynamic processes in the channel of an air laser plasma generator operating at atmospheric pressure are analyzed. In the multigroup approximation a numerical radiation gasdynamic model is formulated on the basis of the equations of motion of a viscous heat-conducting gas and the selective thermal radiation transport equation. Laminar and turbulent subsonic generator operation regimes are considered.For the purpose of approximately describing the turbulent gas and plasma mixing the Navier-Stokes equations averaged after Reynolds and the k-ε turbulence model are used. The problem is solved in the time-dependent two-dimensional axisymmetric formulation.Strong radiation-gasdynamic interaction regimes are investigated. In these regimes the energy losses due to radiation from the high-temperature region of the laser plasma and the absorption of its thermal self-radiation by the surrounding plasma and gas layers (radiation reabsorption) appreciably affect the gasdynamic flow structure. Two methods of integrating the selective thermal radiation transport equation in the generator channel are discussed. In one of these the thermal radiation transport is calculated inside the heated volume and in the other the radiation heat fluxes are calculated on the surfaces bounding the volume. The results of calculating the spectral and integral radiation heat fluxes on the inner surface of the generator are given.__________Translated from Izvestiya Rossiiskoi Academii Nauk, Mekhanika Zhidkosti i Gaza, No. 3, 2005, pp. 126–143.Original Russian Text Copyright © 2005 by Surzhikov.     

绝缘微堆质子直线加速器关键技术研究进展

基于绝缘微堆技术的直线加速器由于其能够实现较高的粒子加速梯度,尤其在质子加速及肿瘤治疗领域的优势得到高度关注。目前该种加速器处于研发阶段,有一系列技术和工程问题有待解决。介绍了课题组在过去的两年里围绕建立一台1 MeV质子注入器原型样机在固态脉冲功率系统、绝缘微堆及质子束源等方面取得的研究进展。实现了耐压梯度接近20 MV/m的环形绝缘微堆样品,样品内径30 mm,外径50mm,厚度15mm,基本达到设计要求;固态脉冲功率系统实现了光导开关多路稳定工作模式,开关直流偏置耐压达到20kV,采用激光二极管触发同步系统在15路同步时实现了低于1ns的抖动,输出300kV的电压脉冲,输出电压脉冲宽度10ns;进行了低能质子加速束流动力学的初步分析和模拟工作,模拟结果表明采用微堆结构可以实现质子束的有效加速和传输。     

Incorporating high-pressure electroosmotic pump and a nano-flow gradient generator into a miniaturized liquid chromatographic system for peptide analysis

We integrate a high-pressure electroosmotic pump (EOP), a nanoflow gradient generator, and a capillary column into a miniaturized liquid chromatographic system that can be directly coupled with a mass spectrometer for proteomic analysis. We have recently developed a low-cost high-pressure EOP capable of generating pressure of tens of thousands psi, ideal for uses in miniaturized HPLC. The pump worked smoothly when it was used for isocratic elutions. When it was used for gradient elutions, generating reproducible gradient profiles was challenging; because the pump rate fluctuated when the pump was used to pump high-content organic solvents. This presents an issue for separating proteins/peptides since high-content organic solvents are often utilized. In this work, we solve this problem by incorporating our high-pressure EOP with a nano-flow gradient generator so that the EOP needs only to pump an aqueous solution. With this combination, we develop a capillary-based nano-HPLC system capable of performing nano-flow gradient elution; the pump rate is stable, and the gradient profiles are reproducible and can be conveniently tuned. To demonstrate its utility, we couple it with either a UV absorbance detector or a mass spectrometer for peptide separations.