利用室温固态反应制备球霰石型CaCO3粒子

合成形态、大小及结构可人为调控的无机材料是现代材料科学的重要研究方向[1]. 借助于各类有机添加剂及模板剂的调控作用, 可利用溶液合成方法制备出形貌与结构受到有效调控的无机粒子[2,3]. 室温固态化学反应已被成功地应用于多种无机纳米粒子[4]及纳米线[5]的合成, 并显示出高效、节能、无污染和操作简便等优点, 因而在材料合成领域具有应用前景[6].     

Modelling of polymer aggregates in solution

The self-consistent mean field model of Scheutjens and Fleer is used to model spherical aggregates of homopolymers and monomer—polymer particles in solution. For homopolymer aggregates we found that the chain ends are preferentially located at the exterior side of the polymer/solvent interface. The distribution of the end segments may be an important parameter in latex film formation. For monomer—polymer particles a “core-shell” structure is found with an extended core containing a monomer—polymer mixture and a thin shell a few nanometres thick strongly enriched with monomer. The monomer-enriched shell seems to function as a solvating envelope for the dangling chain ends. These results are compared with other simulations based on a single chain in a spherical-cavity model.     

超临界流体技术在制备药物输送系统中的应用

超临界流体技术以其特有的优点成为引人注目的制备药物细微粒子及控制释放的药物输送系统的方法。本文介绍了超临界流体沉淀技术的概念、进展及相关的应用。     

表面引发原子转移自由基聚合方法合成Fe3O4/PMMA复合纳米微粒

采用表面引发原子转移自由基聚合方法合成了核壳结构的磁性高分子纳米微粒. 作为聚合反应引发剂的3-氯丙酸, 首先与油酸修饰的Fe3O4纳米微粒表面的部分油酸置换, 然后在Fe3O4纳米微粒表面引发甲基丙烯酸甲酯聚合, 合成的纳米复合材料用TEM, FTIR, XRD和DSC表征. 磁性测试结果表明, 所制备的磁性高分子纳米微粒仍具有超顺磁性, 但由于聚合物的存在, 其饱和磁化强度降低.     

Particle-size distribution of polycyclic aromatic hydrocarbons in urban air in southern Spain

The size distribution of polycyclic aromatic hydrocarbons (PAH) was determined for airborne particles from a large city with high vehicular traffic. The analytical method was optimised and validated using NIST standard reference material (SRM 1649a Urban Dust). The 16 priority PAH listed in the US-EPA were Soxhlet-extracted from filtered particulate matter and then fractionated using on-column chromatography. The aromatic fraction was quantified by gas chromatography-mass spectrometry. Real samples of particles collected in Seville (Spain) were analysed using the validated method. Values for the total concentration of PAH in the air, as well as the concentrations of each PAH in six particle-size ranges were obtained. Values of the PAH in TSP, PM₁₀, PM_2.5 and PM₁ were assessed.     

Sterically and electrosterically stabilized emulsion polymerization. Kinetics and preparation

The principal subject discussed in the current paper is the radical polymerization in the aqueous emulsions of unsaturated monomers (styrene, alkyl (meth)acrylates, etc.) stabilized by non-ionic and ionic/non-ionic emulsifiers. The sterically and electrosterically stabilized emulsion polymerization is a classical method which allows to prepare polymer lattices with large particles and a narrow particle size distribution. In spite of the similarities between electrostatically and sterically stabilized emulsion polymerizations, there are large differences in the polymerization rate, particle size and nucleation mode due to varying solubility of emulsifiers in oil and water phases, micelle sizes and thickness of the interfacial layer at the particle surface. The well-known Smith-Ewart theory mostly applicable for ionic emulsifier, predicts that the number of particles nucleated is proportional to the concentration of emulsifier up to 0.6. The thin interfacial layer at the particle surface, the large surface area of relatively small polymer particles and high stability of small particles lead to rapid polymerization. In the sterically stabilized emulsion polymerization the reaction order is significantly above 0.6. This was ascribed to limited flocculation of polymer particles at low concentration of emulsifier, due to preferential location of emulsifier in the monomer phase. Polymerization in the large particles deviates from the zero-one approach but the pseudo-bulk kinetics can be operative. The thick interfacial layer can act as a barrier for entering radicals due to which the radical entry efficiency and also the rate of polymerization are depressed. The high oil-solubility of non-ionic emulsifier decreases the initial micellar amount of emulsifier available for particle nucleation, which induces non-stationary state polymerization. The continuous release of emulsifier from the monomer phase and dismantling of the non-micellar aggregates maintained a high level of free emulsifier for additional nucleation. In the mixed ionic/non-ionic emulsifiers, the released non-ionic emulsifier can displace the ionic emulsifier at the particle surface, which then takes part in additional nucleation. The non-stationary state polymerization can be induced by the addition of a small amount of ionic emulsifier or the incorporation of ionic groups onto the particle surface. Considering the ionic sites as no-adsorption sites, the equilibrium adsorption layer can be thought of as consisting of a uniform coverage with holes. The de-organization of the interfacial layer can be increased by interparticle interaction via extended PEO chains--a bridging flocculation mechanism. The low overall activation energy for the sterically stabilized emulsion polymerization resulted from a decreased barrier for entering radicals at high temperature and increased particle flocculation.     

Production of citric acid using immobilized conidia of Aspergillus niger

Conidia of Aspergillus niger were immobilized in calcium alginate gel for the production of citric acid. First, the type of the preactivation medium, together with the preactivation period, was investigated. It was found that A. niger requires a 2-d preactivation period at a 0.05 g/L NH₄NO₃ concentration. Second, preactivated cells were used to determine the effects of nitrogen concentration and the flow rate of oxygen and air on the production of citric acid. Maximum citric acid production was attained with medium containing 0.01 g/L of NH₄NO₃. The rate of citric acid production in the nitrogenous medium was 33% higher when oxygen was used instead of air during the production phase. This corresponds to an increase of 85% when compared to production when neither oxygen nor air was fed into the system. In the nonnitrogenous medium citric acid concentration remained similar regardless of the use of air or oxygen. However, in the nonnitrogenous production medium, citric acid production was not influenced considerably when oxygen was used instead of air. The advantage of using immobilized cells is that production is achieved easily in the continuous system. Therefore, citric acid production was also tested using a packed-bed bioreactor, and an increase in productivity by a factor of 22 was achieved compared to the batch system.     

Synthesis of Molecularly Imprinted Polymer Particles by Suspension Polymerization in Silicon Oil

Molecular imprinting is a method to prepare polymers with recognition site of desired and predetermined selectivity1. Molecularly imprinted polymers (MIP) are prepared by copolymerizing functional and cross-linking monomers in the presence of a molecular …     

Synthesis of spherical microcapsules by photopolymerization in aerosols

 The preparation of polymer microcapsules of well defined size in the range of 10–50 μm with different shell thickness to core diameter ratios is described. An aerosol of monodisperse droplets of a homogeneous ternary liquid system which contained a hydrophobic component and a hydrophilic component dissolved in a high-volatile mutual solvent, was produced by dispersing with a vibrating-orifice aerosol generator. After the evaporation of the solvent in a nitrogen atmosphere the particles demix and form a two-phase droplet of core-shell type. These droplets were illuminated with UV light and polymerized to highly monodisperse microcapsules with a solid polymer shell and a liquid core. The properties of the resulting particles (size, size distribution, shell thickness, shape and surface characteristics) were investigated by scanning electron microscopy, Raman spectroscopy on single optically levitated particles, and confocal Raman micro spectroscopy. The microcapsules were highly monodisperse and have spherical shape. Received: 24 July 1996 Accepted: 29 August 1996     

Fluctuation-dominated kinetics in the a+b→0 reaction between immobile particles

We consider the accumulation of immobile particles landing on a one-dimensional lattice and annihilating via the A + B 0 bimolecular reaction. Here we focus on short-range interactions with cutoff. We investigate through computer simulations both the kinetics of the particles' accumulation and also their spatial distribution. The relation between the exponents describing the growth of the particles' concentration and the correlation length of their distribution shows that the kinetics of accumulation is fluctuation-dominated.This work is dedicated to Prof. George H. Weiss.