X‐Tream quality assurance in synchrotron X‐ray microbeam radiation therapy

Microbeam radiation therapy (MRT) is a novel irradiation technique for brain tumours treatment currently under development at the European Synchrotron Radiation Facility in Grenoble, France. The technique is based on the spatial fractionation of a highly brilliant synchrotron X‐ray beam into an array of microbeams using a multi‐slit collimator (MSC). After promising pre‐clinical results, veterinary trials have recently commenced requiring the need for dedicated quality assurance (QA) procedures. The quality of MRT treatment demands reproducible and precise spatial fractionation of the incoming synchrotron beam. The intensity profile of the microbeams must also be quickly and quantitatively characterized prior to each treatment for comparison with that used for input to the dose‐planning calculations. The Centre for Medical Radiation Physics (University of Wollongong, Australia) has developed an X‐ray treatment monitoring system (X‐Tream) which incorporates a high‐spatial‐resolution silicon strip detector (SSD) specifically designed for MRT. In‐air measurements of the horizontal profile of the intrinsic microbeam X‐ray field in order to determine the relative intensity of each microbeam are presented, and the alignment of the MSC is also assessed. The results show that the SSD is able to resolve individual microbeams which therefore provides invaluable QA of the horizontal field size and microbeam number and shape. They also demonstrate that the SSD used in the X‐Tream system is very sensitive to any small misalignment of the MSC. In order to allow as rapid QA as possible, a fast alignment procedure of the SSD based on X‐ray imaging with a low‐intensity low‐energy beam has been developed and is presented in this publication.     

Characterization of the variation of the material properties in a freestanding inhomogeneous thin film

This Letter presents a new technique for measuring the variation of the material properties along the thickness in a freestanding inhomogeneous thin film. The analytical results reveal a simple relation between the material properties and the set of cut-off frequencies of Lamb waves. The influence of the graded properties on the variation of cut-off frequencies in three different kinds of models, including artificial FGM model, sub-surface damage model, and nano-porous thin film model, is discussed. These results provide theoretical guidance for characterizing the material property variations of MEMS/NEMS.     

梯度颗粒复合介质的光学双稳

重点研究了组分的梯度构形对带壳球形颗粒复合介质的光学双稳特性的影响.其中球形颗粒是由非线性核和介电函数具有梯度分布的线性壳组成.对于壳层介电函数具有幂指数分布的情况,通过求解麦克斯韦方程,得到各区域的势能分布函数,从而求得核内电场的数学表达式.数值研究发现,该复合介质的光学双稳阈值和区域与壳层的厚度及壳层的介电幂指数有关,随着壳层厚度增大或幂指数增大,双稳阈值将变宽.此外,还研究了正入射情况下复合材料体系的反射系数随外电场的变化情况, 发现其关系曲线是一条回线. 关键词： 梯度颗粒 复合介质 光学双稳     

潜热型热功能流体强化换热分析

本文建立了分析带有相变微胶囊的潜热型热功能流体的流动和换热过程数理模型,应用有限差分法和移动热源法进行联合求解。计算结果表明,相变微胶囊的加入:较好地提高了流体的换热性能。获得了相变颗粒大小和体积分数对强化换热影响等结果。计算结果对该类流体的设计和应用提供了理论依据。     

冲击相边界传播过程中梯度材料的形成

 采用一种基于简单混合物模型的本构，研究了不可逆相变材料中一维的冲击相边界的传播规律，发现在突加载荷并连续卸载的应力边界条件下，样品内部有梯度材料形成。分析了边界条件对材料梯度变化的影响，并且用基于特征线的数值方法计算了不同的边界条件下材料的梯度分布，从而提出利用冲击相边界的传播制备梯度材料的可能性。最后对这种方法的利弊做了探讨。     

Effective Pyroelectric Coefficient and Polarization Offset of Compositionally Step-like Graded Ferroelectric Structures

In this paper, the effective pyroelectric coefficient and polarization offset of the compositionally step-like graded multilayer ferroelectric structures have been studied by use of the first-principles approach. It is exhibited that the dielectric gradient has a nontrivial influence on the effective pyroelectric coefficient, but has a little influence on the polarization offset; and the polarization gradient plays an important role in the abnormal hysteresis loop phenomenon of the compositionally step-like graded ferroelectric structures. Moreover, the origin of the polarization offset is explored, which can be attributed to the polarization gradient in the compositionally step-like graded structure.     

Silicon detector technology development in India for the participation in international experiments

A specific research and development program has been carried out by BARC in India to develop the technology for large area silicon strip detectors for application in nuclear and high energy physics experiments. These strip detectors will be used as pre-shower detector in the CMS experiment at LHC, CERN for π ⁰/λ rejection. The fabrication technology to produce silicon strip detectors with very good uniformity over a large area of ∼40 cm², low leakage currents of the order of 10 nA/cm² per strip and high breakdown voltage of >500 V has been developed by BARC. The production of detectors is already under way to deliver 1000 detector modules for the CMS and 90% production is completed. In this paper, research and development work carried out to develop the detector fabrication technology is briefly described. The performance of the silicon strip detectors produced in India is presented. The present status of the detector technology is discussed.      

强磁场条件下Mn-Sb梯度复合材料的制备

研究了Mn-898wt%Sb合金在无磁场以及磁场为B=88 T、不同强度的磁场梯度作用下的凝固组织变化，并分析了上述不同强磁场条件对合金凝固组织影响的作用机理.研究表明，在较大梯度磁场作用时，试样中出现了初生MnSb相与Sb相以及共晶组织共存的现象，而且初生MnSb相与Sb相产生了明显的分层现象.此外，磁场梯度作用下初生MnSb相和Sb相的含量随着磁场梯度的增大而增加.论文对初生MnSb相和Sb相的分离机理进行了探讨，发现在梯度磁场作用下，熔融金属中不同磁化率的合金组元团簇受力不同，造成     

Three-dimensional analytical solution for a transversely isotropic functionally graded piezoelectric circular plate subject to a uniform electric potential difference

This paper studies the problem of a functionally graded piezoelectric circular plate subjected to a uniform electric potential difference between the upper and lower surfaces. By assuming the generalized displacements in appropriate forms, five differential equations governing the generalized displacement functions are derived from the equilibrium equations. These displacement functions are then obtained in an explicit form, which still involve four undetermined integral constants, through a step-by-step integration which properly incorporates the boundary conditions at the upper and lower surfaces. The boundary conditions at the cylindrical surface are then used to determine the integral constants. Hence, three-dimensional analytical solutions for electrically loaded functionally graded piezoelectric circular plates with free or simply-supported edge are completely determined. These solutions can account for an arbitrary material variation along the thickness, and thus can be readily degenerated into those for a homogenous plate. A numerical example is finally given to show the validity of the analysis, and the effect of material inhomogeneity on the elastic and electric fields is discussed. Supported by the National Natural Science Foundation of China (Grant Nos. 10472102 and 10432030) and the Specialized Research Fund for the Doctoral Program of Higher Education of China (Grant No. 20060335107)     

统计优化迭代法测量质子交换波导折射率分布

提出了一种用于拟合测量渐变波导的折射率分布的新的理论处理。该方法把统计优化手段导入循环迭代法 ,可适用于费米函数这一类曲线变化范围大、且有多个自变量的函数。实验上用焦磷酸质子交换制备了LiNbO3波导样品 ,用该方法对退火后的折射率分布作了测量拟合 ,折射率拟合值与实验值的均方差为± 8.2× 10 - 4。