低噪音摩阻复台材料影响因素的探讨

采用动态粘弹谱仪（ＤＤＶ）、电子扫描显微镜（ＳＥＭ）和摩擦试验机等对影响摩阻复合材料制动噪音的因素进行了探讨。结果表明，摩阻材料基体的合理改性以提高其损耗角正切ｔａｎδ对减少振动、降低噪音行之有效。同时对传统解决噪音的方法，如添加固体润滑剂、橡胶共混等进行了分析比较。     

A STUDY OF J-INTEGRAL OF THE ORTHOTROPIC COMPOSITE MATERIAL

ＡＳＴＵＤＹＯＦＪ－ＩＮＴＥＧＲＡＬＯＦＴＨＥＯＲＴＨＯＴＲＯＰＩＣＣＯＭＰＯＳＩＴＥＭＡＴＥＲＩＡＬＷａｎｇＡｉ－ｑｉｎ（王蔼勤）；ＦｅｎｇＢａｏ－ｌｉａｎ（冯宝莲）；ＹａｎｇＷｅｉ－ｙａｎｇ（杨维阳）（ＴａｉｙｕａｎＨｅａｖｙＭａｃｈｉｎｅｒｙ．...     

Modulation of Particle Concentrations in the Interference Laser Radiation Field

Spatial redistribution of microparticles in a suspension on exposure to the interference laser field depending on the parameters of the particles and the field characteristics has been analyzed theoretically. Results of experimental investigations are presented that illustrate the capture of an ensemble of polymeric small spheres and also of the lymphocytes of human blood and other microparticles in a liquid in the interference radiation bands of the He–Ne laser.     

Optimal control of unsteady compressible viscous flows

The control of complex, unsteady flows is a pacing technology for advances in fluid mechanics. Recently, optimal control theory has become popular as a means of predicting best case controls that can guide the design of practical flow control systems. However, most of the prior work in this area has focused on incompressible flow which precludes many of the important physical flow phenomena that must be controlled in practice including the coupling of fluid dynamics, acoustics, and heat transfer. This paper presents the formulation and numerical solution of a class of optimal boundary control problems governed by the unsteady two‐dimensional compressible Navier–Stokes equations. Fundamental issues including the choice of the control space and the associated regularization term in the objective function, as well as issues in the gradient computation via the adjoint equation method are discussed. Numerical results are presented for a model problem consisting of two counter‐rotating viscous vortices above an infinite wall which, due to the self‐induced velocity field, propagate downward and interact with the wall. The wall boundary control is the temporal and spatial distribution of wall‐normal velocity. Optimal controls for objective functions that target kinetic energy, heat transfer, and wall shear stress are presented along with the influence of control regularization for each case. Copyright © 2002 John Wiley & Sons, Ltd.     

抽吸和压力梯度在层流边界层转捩过程中的作用

用空间模式的二次稳定性理论研究了抽吸和压力梯度对边界层三维亚谐扰动流动稳定性的影响．数值结果表明，固体边界上的抽吸有明显的层流控制作用，逆压梯度则有较强的不稳定作用．     

Optimality conditions and duality theory for minimizing sums of the largest eigenvalues of symmetric matrices

The sum of the largest eigenvalues of a symmetric matrix is a nonsmooth convex function of the matrix elements. Max characterizations for this sum are established, giving a concise characterization of the subdifferential in terms of a dual matrix. This leads to a very useful characterization of the generalized gradient of the following convex composite function: the sum of the largest eigenvalues of a smooth symmetric matrix-valued function of a set of real parameters. The dual matrix provides the information required to either verify first-order optimality conditions at a point or to generate a descent direction for the eigenvalue sum from that point, splitting a multiple eigenvalue if necessary. Connections with the classical literature on sums of eigenvalues and eigenvalue perturbation theory are discussed. Sums of the largest eigenvalues in the absolute value sense are also addressed.This paper is dedicated to Phil Wolfe on the occasion of his 65th birthday.The work of this author was supported by the National Science Foundation under grants CCR-8802408 and CCR-9101640.The work of this author was supported in part during a visit to Argonne National Laboratory by the Applied Mathematical Sciences subprogram of the Office of Energy Research of the U.S. Department of Energy under contract W-31-109-Eng-38, and in part during a visit to the Courant Institute by the U.S. Department of Energy under Contract DEFG0288ER25053.     

Azine bridged silver coordination polymers: Powder X-ray diffraction route to crystal structure determination of silver benzotriazole

In continuation of our interest in solid-state structures of silver complexes of photographic importance, the structure for silver benzotriazole (AgBZT), has now been obtained. The preferred method for solving crystal structures is via single-crystal X-ray diffraction (XRD). However, for some materials, growing single crystals of appropriate size and quality is often difficult or even impossible. AgBZT is an example of such a silver complex with poor solubility. The usual routes to preparing single crystals using recrystallization from a cooperating solvent resulted in polycrystalline powder samples. We propose a crystal structure for AgBZT, solved from synchrotron X-ray powder diffraction data, using a direct-space Monte Carlo simulated annealing approach. AgBZT crystals are monoclinic, (P2₁/c), with unit cell dimensions, a=14.8052(3) Å, b=3.7498(4) Å, c=12.3495(12) Å, and β=114.200(6)°. The AgBZT complex is constructed from all three of the Benzotriazole (BZT) nitrogens bonding to a separate silver atom. As a consequence of this bonding mode, the structure is a highly cross-linked, coordination polymer.     

A note on an SOR-like method for augmented systems

Golub et al. (2001, BIT, 41, 71–85) gave a generalizedsuccessive over-relaxation method for the augmented systems.In this paper, the connection between the SOR-like method andthe preconditioned conjugate gradient (PCG) method for the augmentedsystems is investigated. It is shown that the PCG method isat least as accurate (fast) as the SOR-like method. Numericalexamples demonstrate that the PCG method is much faster thanthe SOR-like method.     

精确搜索下的非线性共轭梯度法

该文提出一种无约束优化非线性共轭梯度法，证明了精确线性 搜索下的全局收敛性。当目标函数为一致凸函数时，证明了算法具有线性收敛速度。数值实验表明算法对于求解实际问题是有效的。     

Inorganic Sol-Gel Preparation of Medium Sized Microparticles of Li2TiO3 from TiCl4 as Tritium Breeding Material for Fusion Reactors

Microspheres of Li₂TiO₃ were fabricated by a classical, inorganic sol-gel process from commercially available TiCl₄. Elaborated process consists of the following main steps: (1) dissolving of TiCl₄ in concentrated aqueous HCl and addition of LiOH; (2) formation of sol emulsion in 2-ethylhexanol-1 containing the surfactant SPAN-80 (EH); (3) gelation of emulsion drops by extraction of water with partially dehydrated EH; (4) impregnation of gel to Li:Ti molar ratio MR = 2; (5) thermal treatment at 1200°C in order to receive chloride free product. This temperature can be significantly lowered (to 750°C) by dechlorination starting solution TiCl₄ by chemical treatment of the with nitric acid to form of nitrate-stabilized titania sols. Tritium release from sol-gel made Li₂TiO₃ microspheres were found very close to that observed for other traditional materials, however for the first sample process starts slightly earlier.