An efficient method for structural optimization

Based on the dual theory of nonlinear mathematical programming and the second order Taylor series expansions of functions, an efficient algorithm for structural optimum design has been developed. The main advantages of this method are the generality in use, the efficiency in computation and the capability in identifying automatically the set of active constraints. On the basis of the virtual work principle, formulas in terms of element stresses for the first and second order derivatives of nodal displacement and stress with respect to design variables are derived. By applying the Saint-Venant's principle, the computational efforts involved in the Hessian matrix associated with the iterative expression can be significantly reduced. This method is especially suitable for optimum design of large scale structures. Several typical examples have been optimized to test its uasefulness.     

Influence of corrugation frequency and amplitude on the stress state of hollow elliptic cylinders

The influence of corrugation frequency and amplitude on the displacement and stress fields is analyzed based on an approach to solving stress problems for corrugated elliptical cylinders with certain end conditions.Translated from Prikladnaya Mekhanika, Vol. 40, No. 9, pp. 87–93, September 2004.     

A quasi-flow constitutive model with strain-rate dependence

In this paper, the proposed is a quasi-flow constitutive model with strain-rate sensitivity for elastic plastic large deformation. The model is based on the Quasi-flow Corner theory, and is suitable for the sheet metal forming process simulation with a variable punch machine velocity. Uniaxial tensile tests and deep-drawing tests of a circular blank with square punch are carried out and numerically simulated. The consistency between the experimental and the numerically simulated results shows the validity of the present new constitutive model. The project supported by the Scientific Foundation of National Outstanding Youth of China (10125208), the National Natural Science Foundation of China (19832020), and the National Education Committee of China     

A new phenomenon of acoustic streaming

This paper describes a new phenomenon of acoustic streaming which takes place when a Helmholtz resonator is excited by an inside sound source with resonant frequency, and takes the form of a strong turbulent jet. The flow visualizations, hot wire and LDV measurements are combined to investigate the process of acoustic streaming. It is found that this kind of acoustic streaming results from the contribution of Reynolds stress.     

Temperature sensing using the spectral interference of polarization modes in a highly birefringent fiber

The spectral interference of polarization modes in a highly birefringent (HB) fiber to measure temperature is analyzed theoretically and experimentally. A tandem configuration of a birefringent delay line and a sensing HB fiber is considered and the spectral interferograms are modelled for the known birefringence dispersion of the HB fiber under test. As the delay line, a birefringent quartz crystal of a suitable thickness is employed to resolve a channeled spectrum. The channeled spectra are recorded for different temperatures and the polarimetric sensitivity to temperature, determined in the spectral range from 500 to 850 nm, is decreasing with wavelength. It is demonstrated that the temperature sensing is possible using the wavelength interrogation, i.e., the position of a given interference maximum is temperature dependent. The temperature sensitivity of the HB fiber under test is −0.25 nm/K and the resolution is better than 0.5 K.     

基于光纤的光学频率传递研究

随着光钟研究的发展, 光钟的稳定度和不确定度均达到10^-18量级. 通过光纤可以实现光钟频率信号的高精度传输, 有望用于未来“秒”定义的复现. 演示了百公里级实验室光纤上的光学频率传递. 对于在实验室70 km光纤盘上实现的光频传递, 光纤相位噪声抑制在1-250 Hz傅里叶频率范围内均接近于光纤延时极限, 对应传输稳定度(Allan偏差)为秒级稳定度1.2×10^-15, 10000 s稳定度为1.4×10^-18. 实验室100 km光纤的光频传递秒级稳定度也达到了5×10^-15. 提出了光纤噪声用户端补偿的方案, 可以简化星形传递网络中心站的复杂度. 在25 km光纤上演示了该传递方案, 实现的传输稳定度接近传统前置补偿传递方案.     

补偿转向盘振动力矩的控制策略研究

在Matlab/Simulink中建立了电动助力转向系统动力学模型,根据路感信息与不平路面引起的振动干扰在频率上的区别,经过高通滤波检测出路面不平整产生的转向系统干扰力矩,通过助力电机提供相反大小的力矩对其进行补偿。针对路感信息与路面振动干扰在频率上区分界限的不固定性,设计了一种在线可调节滤波器截止频率的控制方法,避免对车辆路感信息正常传递的影响。仿真结果表明,所设计的补偿控制策略能够有效衰减不平路面干扰力矩到方向盘的传递。     

基于PLC模糊自适应PID门座式起重机变频调速系统的设计与实现

为了进一步提高门座式起重机控制系统的平稳性和可靠性,在研究传统的起重机控制系统的基础上,设计了基于PLC模糊自适应PID的起重机变频调速系统,利用先进的模糊自适应PID算法与PLC控制技术相结合实现智能变频控制。系统直接由PLC实现函数运算取代常规的查表方式,改善调速性能,实现了变频调速系统的快速控制;同时,通过PLC对起重机变频器进行无触点控制,有效提高了的准确可靠性。仿真结果表明：加入模糊自适应PID控制的起重机变频调速系统比传统系统响应速度快,超调量低于3%,更加平稳可靠;同时降低了起重机功耗,节能近20%,并有效延长了电动机的使用寿命。     

准晶体结构光纤表面等离子体共振传感器特性研究

光纤表面等离子体共振传感器在高灵敏度传感和在线实时监测等领域具有重要意义. 设计了一种六重准晶体结构环形通道光纤表面等离子体共振传感器, 基于有限元法对该传感器的传感特性进行了数值模拟. 研究了光纤各结构参量对传感器特性的影响规律. 研究结果表明: 待测液折射率的有效监测范围为1.25–1.331, 最高灵敏度可达26400 nm·RIU^-1, 传感器具有损耗谱杂峰少、探测范围广、灵敏度高、设计灵活性高和光路可弯曲等特点, 在生化检测、公共安全、环境污染监测以及高灵敏度传感等领域具有广泛的应用前景.     

基于跳频通信的移动机械遥控系统

为解决在同一个工作区域多个无线通信网络容易彼此干扰无法协同工作的问题,以移动机械工程车辆为控制对象,设计JRCJ500无线遥控系统,由用户手持终端接收用户操作指令,现场控制器驱动远程设备动作,实现对车辆的远程操作控制与状态信息反馈;采用STM32L低功耗处理器设计无线通信模块,选择公用通信频段,基于跳频扩频通信技术,约定无线通信数据格式与跳频频点,通过简单高效的跳频图案生成算法,在每一帧数据中添加同步字头,实现了无线通信网络的快速同步组网,保证了通信的稳定性,实现了在限定工作区域多台无线通信设备同时工作的应用需求。由于采用模块化设计,系统具有良好的通用性和可移植性,能够在多种复杂恶劣工作场合实现远程控制功能。