Si-O-C骨架支撑型高循环性能锂离子电池硅基负极材料

通过经济有效的方法制备得到一种具有长循环寿命的高效稳定性硅/硅氧碳/无定形碳的复合负极材料结构. 在这种结构中,以具有稳定化学性能的硅氧碳结构作为骨架,来支撑和隔离硅纳米颗粒结构. 材料中包含的无定形碳组分可提高硅/硅氧碳结构的电导性能. 这种复合负极结构在0.3C电流充放电情况下,不仅能发挥出637.3 mAh·g^-1的比容量,而且在经过100 周的充放电循环后,其容量保持率也达到86%. 这种新型硅基负极材料的设计为其他功能材料的设计提供了一种潜在可能的方法.     

Ultrastable Surface-Dominated Pseudocapacitive Potassium Storage Enabled by Edge-Enriched N-Doped Porous Carbon Nanosheets

The development of ultrastable carbon materials for potassium storage poses key limitations caused by the huge volume variation and sluggish kinetics. Nitrogen-enriched porous carbons have recently emerged as promising candidates for this application; however, rational control over nitrogen doping is needed to further suppress the long-term capacity fading. Here we propose a strategy based on pyrolysis–etching of a pyridine-coordinated polymer for deliberate manipulation of edge-nitrogen doping and specific spatial distribution in amorphous high-surface-area carbons; the obtained material shows an edge-nitrogen content of up to 9.34 at %, richer N distribution inside the material, and high surface area of 616 m² g⁻¹ under a cost-effective low-temperature carbonization. The optimized carbon delivers unprecedented K-storage stability over 6000 cycles with negligible capacity decay (252 mA h g⁻¹ after 4 months at 1 A g⁻¹), rarely reported for potassium storage.     

Surface-Plasmonic-Field-Induced Photoredox Catalysis and Mediated Electron Transfer for Washing-Free DNA Detection

Distance-dependent electromagnetic radiation and electron transfer have been commonly employed in washing-free fluorescence and electrochemical bioassays, respectively. In this study, we combined the two distance-dependent phenomena for sensitive washing-free DNA detection. A distance-dependent surface plasmonic field induces rapid photoredox catalysis of surface-bound catalytic labels, and distance-dependent mediated electron transfer allows for rapid electron transfer from the surface-bound labels to the electrode. An optimal system consists of a chemically reversible acceptor (Ru(NH₃)₆³⁺), a chemically reversible photoredox catalyst (eosin Y), and a chemically irreversible donor (triethanolamine). Side reactions with O₂ do not significantly decrease the efficiency of photoredox catalysis. Energy transfer quenching between the electrode and the label can be lowered by increasing the distance between them. Washing-free DNA detection had a detection limit of approximately 0.3 nm in buffer and 0.4 nm in serum without a washing step.     

A Long‐Cycling Aqueous Zinc‐Ion Pouch Cell: NASICON‐Type Material and Surface Modification

Aqueous zinc‐ion batteries (ZIBs) have become the highest potential energy storage system for large‐scale applications owing to the high specific capacity, good safety and low cost. In this work, a NASICON‐type Na₃V₂(PO₄)₃ cathode modified by a uniform carbon layer (NVP/C) has been synthesized via a facile solid‐state method and exhibited significantly improved electrochemical performance when working in an aqueous ZIB. Specifically, the NVP/C cathode shows an excellent rate capacity (e. g., 48 mAh g^?1 at 1.0 A g^?1). Good cycle stability is also achieved (e. g., showing a capacity retention of 88% after 2000 cycles at 1.0 A g^?1). Furthermore, the Zn²⁺ (de)intercalation mechanism in the NVP cathode has been determined by various ex‐situ techniques. In addition, a Zn||NVP/C pouch cell has been assembled, delivering a high capacity of 89 mAhg^?1 at 0.2 A g^?1 and exhibiting a superior long cycling stability.     

丙烯酸盐喷膜防水材料在酸碱浸润和冻融循环条件下的耐久性试验分析

丙烯酸盐喷膜防水材料在酸碱溶液浸润和冻融条件下的耐久性能是该类材料在工程应用中较难回避的实际问题,论文采用酸性介质(0.2%的H2SO4溶液)和碱性介质(0.1%NaOH+饱和Ca(OH)2溶液)对该材料进行饱和浸泡并进行冻融循环后,研究了该材料的吸水性、断裂拉伸强度和拉断伸长率的变化规律。试验结果表明:喷膜防水材料在侵蚀-冻融循环作用下,其拉断伸长率和断裂拉伸强度显著降低,且酸性介质对材料拉伸性能的影响较大;材料耐低温冰冻能力较强,耐高温能力较差。反映出丙烯酸盐喷膜防水材料在低温冰冻和碱性介质中耐久性较好,不建议在高温和酸性介质条件下使用。     

非制冷红外焦平面无效像元识别与实时补偿

非制冷红外焦平面阵列(UFPA)不可避免地存在无效像元, 这对UFPA的成像效果造成了极坏的影响。为解决这一问题, 在分析并总结各种非制冷红外焦平面无效像元识别算法优缺点的基础上, 提出一种新的无效像元识别与实时补偿方法。根据像元响应特性, 采用循环迭代法以搜索最优的无效像元判别阈值, 并据此标识出无效像元的位置。在硬件实现阶段, 对于M×N的UFPA器件, 在任意采样时刻, 利用移位寄存器保存当前采样点之前的M个响应值, 使其输出可实时更新为与采样点同列的上一个数据; 同时, 利用一般的寄存器实时保存与采样点同行的前一个数据, 采用同帧行列间内插法实现无效像元的实时补偿。该算法有效地解决了无效像元识别阈值选取困难及不易实时补偿的问题。针对320×240的UFPA器件, 该算法在基于FPGA的红外图像处理系统上得以实时实现, 成功地消除了无效像元对UFPA成像效果的影响。     

Analysis of longitudinal multispin orders in strongly coupled spin systems

Longitudinal multispin orders provide an effective way for measurement of scalar couplings and also to probe molecular interactions and dynamics. Analysis of longitudinal orders has been made in strongly coupled AB and ABX spin systems to determine the dependence of strong coupling parameter on these orders. Experimental and simulated spectra of various longitudinal orders are illustrated for these spin systems. This general procedure can be extended to broad range of spin systems to understand the influence of strong coupling on longitudinal orders.     

Application of cogwheel phase cycling to sideband manipulation experiments in solid-state NMR

Cogwheel phase-cycling schemes are applied to sideband suppression and sideband separation experiments in solid-state NMR. It is shown that cogwheel phase cycles lead to the elimination of most pulse imperfection effects, while using far fewer experimental signal acquisitions than conventional phase-cycling methods.     

Environmental Effects on the Mechanical Properties of Glass-FRP and Aramid-FRP Rebars

In the paper, the experimental results on the effect of temperature and moisture on the mechanical properties of FRP (Fiber-Reinforced Polymer) reinforcements are presented. FRP rebars made from glass and aramid fibers were subjected to cyclic thermal actions at temperatures ranging between 20 and 70°C, typical of natural hot-climate environments. Tensile tests were also carried out on FRP rebars. The effect of moisture was investigated by cyclic wetting and drying the FRP rebars under laboratory conditions before their testing in tension. Finally, the elastic modulus and tensile strength of the FRP rebars exposed to these cyclic actions were compared with those obtained for unexposed ones, in order to evaluate the mechanical damage caused by environmental conditions.     

Quantitative T(1)(ρ) imaging using phase cycling for B0 and B1 field inhomogeneity compensation

T_1ρ imaging is useful in a number of clinical applications. T_1ρ preparation methods, however, are sensitive to non-uniformities of the B₀ magnetic field and the B₁ RF field. These common system imperfections can result in image artifacts and quantification errors in T_1ρ imaging. We report on a phase-cycling method which can eliminate B₁ RF inhomogeneity effects in T_1ρ imaging. This method does not only correct for image artifacts but also for T_2ρ contamination caused by B₁ RF inhomogeneity. The presence of B₀ magnetic field inhomogeneity can compromise the effectiveness of this method for B₁ RF inhomogeneity correction. We demonstrate that, by combining the spin-locking scheme reported by Dixon et al. (Myocardial suppression in vivo by spin locking with composite pulses. Magn Reson Med 1996; 36:90-94) with phase cycling, we can simultaneously correct B₀ magnetic field inhomogeneity effects and B₁ RF inhomogeneity effects in T_1ρ imaging. Phantom and in vivo data sets are used to demonstrate the proposed methods and to compare them with other existing T_1ρ preparation methods.