Kinetics and mechanism of the grafting of 2-(dimethylamino)ethyl methacrylate onto hydrocarbon substrates

The kinetics of grafting a basic monomer, 2-(dimethylamino)-ethyl methacrylate (DMAEMA) to hydrocarbon substrates have been investigated. These systems were chosen as models for the grafting of a homopolymerizable monomer to polyolefins such as polyethylene. The reactions with squalane and n-eicosane were initiated by an organic peroxide, 2,5-dimethyl 2,5 dit-butylperoxy)-3-hexyne; grafting yields become significant at high reaction temperatures and low monomer concentrations. In squalane, the order of reaction with respect to monomer increased from about 1.1 for 0.22?0.44M DMAEMA to almost 2 at 0.69M DMAEMA; the order with respect to initiator was 0.56. The overall activation energy in the 130?160°C temperature range was, however, surprisingly low, 42±5 kJ mol^?1. When analytical data were used to separate the overall rate into those for grafting and homopolymerization, different kinetic paths were observed for the competing reactions. These results are interpreted in terms of two different mechanisms; intramolecular chain transfer plays an important role in grafting, while depropagation becomes a major factor in homopolymerization at temperatures above 150°C. © 1995 John Wiley & Sons, Inc.     

The role of radicals in enzymatic processes

Research on the mechanism of action of coenzyme B12, adenosylcobalamin, as a graduate student introduced the author to the field of organic free radicals in enzymology. Twenty years later, related work on S-adenosylmethionine (SAM) as a "poor man's coenzyme B12" was initiated in a detailed analysis of the mechanism of action of lysine 2,3-aminomutase (LAM). The interconversion of L-lysine and L-beta-lysine is catalyzed by LAM, which requires SAM, pyridoxal-5'-phosphate (PLP), and a [4Fe-4S] cluster as coenzymes. The mechanism of this reaction has been delineated as a radical isomerization, in which radical formation is initiated by the [4Fe-4S]-dependent cleavage of the SAM into methionine and the 5'-deoxyadenosyl radical. The mechanism of this process is discussed, together with the role of this radical in hydrogen abstraction from lysine to initiate the substrate radical isomerization. The chemistry underlying the functions of SAM, PLP, and [4Fe-4S] in the action of LAM is novel in all respects, except for the formation of a lysine-PLP aldimine at the active site. Of the four free radicals in the mechanism, three have been characterized by EPR spectroscopy. In the suicide inactivation of adenosylcobalamin-dependent dioldehydrase (DDH) by glycolaldehyde, the formation of cob(II)alamin and 5'-deoxyadenosine is accompanied by the conversion of glycolaldehyde to cis-ethanesemidione radical at the active site. The cis-ethanesemidione radical has been characterized by EPR spectroscopy. Its exceptional stability at the active site is the basis for the inactivation of DDH by glycolaldehyde.     

Gallium metal mediated allylation of carbonyl compounds and imines under solvent-free conditions

Gallium metal is effective in mediating the allylation of various carbonyl compounds and imines under solvent-free conditions, with the application of sonic energy, affording the corresponding homoallylic alcohols and amines. The imines themselves were also prepared under solventless conditions in high yield, thereby establishing a two-step solvent-free synthesis of homoallylic amines. In comparison, indium metal produced a mixture of the desired homoallylic secondary amine and the bis-allylated species via an iminium ion intermediate.     

On the Temperature–Pressure Free‐Energy Landscape of Proteins

We studied the thermodynamic stability of a small monomeric protein, staphylococcal nuclease (Snase), as a function of both temperature and pressure, and expressed it as a 3D free‐energy surface on the p,T‐plane using a second‐order Taylor expansion of the Gibbs free‐energy change ΔG upon unfolding. We took advantage of a series of different techniques (small‐angle Xray scattering, Fourier‐transform infrared spectroscopy, differential thermal analysis, pressure perturbation calorimetry and densitometry) in the evaluation of the conformation of the protein and in evaluating the changes in the thermodynamic parameters upon unfolding, such as the heat capacity, enthalpy, entropy, volume, isothermal compressibility and expansivity. The calculated results of the free‐energy landscape of the protein are in good agreement with experimental data of the p,T‐stability diagram of the protein over a temperature range from 200 to 400 K and at pressures from ambient pressure to 4000 bar. The results demonstrate that combined temperature–pressure‐dependent studies can help delineate the free‐energy landscape of proteins and hence help elucidate which features and thermodynamic parameters are essential in determining the stability of the native conformational state of proteins. The approach presented may also be used for studying other systems with so‐called re‐entrant or Tamman loop‐shaped phase diagrams.     

Thermodynamics of molecular interactions in ethyl iodide+toluene mixtures

The excess Gibb's free energy of mixing, G^E, for ethyl iodide+toluene at 25°C have been obtained from the measured vapor pressuure data. The H^E and G^E values for ethyl iodide+toluene are positive throughout the ethyl iodide concentration range and G^E>H^E. The results have been analyzed in terms of Flory and ideal associated model theory of nonelectrolyte solutions. It has been observed that the ideal associated model approach which assumes the presence of AN and A₂B molecular species describes well (within±10 J-mol^–1 in the worst case) the general dependence of H^E on X_A (mole fraction of ethyl iodide) over the whole composition range for ethyl iodide+toluene mixtures. The equilibrium constants for A+A AB and 2A+BA₂B reactions along with the enthalpies of formation of AB and A₂B molecular species have been calculated.     

Grafting of maleic anhydride to hydrocarbons below the ceiling temperature

Maleic anhydride has been grafted to eicosane and squalane at 60–80°C using 1,2-dichlorobenzene as solvent and benzoyl peroxide as initiator. These hydrocarbons are low molecular weight models for hydrocarbon polymers containing secondary and tertiary hydrogen atoms. In the absence of the hydrocarbon and with monomer concentrations of the order of 1M, low molecular weight poly(maleic anhydride) is formed. On addition of the hydrocarbon, the main product is grafted material and very little homopolymer is formed. The grafts consist primarily of single succinic anhydride units but some of them are short poly(maleic anhydride) chains. Ceiling temperature considerations control the formation of homopolymer in the absence of hydrocarbon substrate. In the presence of eicosane or squalane, initiation of grafting proceeds by hydrogen abstraction from the hydrocarbon. The main factor controlling graft length is then the ratio of the rates of intramolecular hydrogen abstraction and of monomer addition to succinic anhydride radicals © 1995 John Wiley & Sons, Inc.     

氟硅烷自组装单分子膜的制备及其摩擦学性能

利用分子自组装技术制备了全氟辛酰胺丙基硅烷单分子膜,用X射线光电子能谱(XPS)对组装膜的表面元素进行了表征;接触角测试表明,该组装膜具有很好的疏水-疏油性,其对水的接触角高达105°,对正十六烷的接触角为50°.摩擦磨损实验结果表明,全氟辛酰胺丙基硅烷自组装单分子膜可以大大降低基片的摩擦系数,使载玻片的摩擦系数从0.85左右降低到0.14左右,而且低负荷下具有很好的耐磨性.     

Surface free energy of a solid from contact angle hysteresis

Nature of contact angle hysteresis is discussed basing on the literature data (Colloids Surf. A 189 (2001) 265) of dynamic advancing and receding contact angles of n-alkanes and n-alcohols on a very smooth surface of 1,1,2,-trichloro-1,2,2,-trifluoroethane (FC-732) film deposited on a silicon plate. The authors considered the liquid absorption and/or retention (swelling) processes responsible for the observed hysteresis. In this paper hysteresis is considered to be due to the liquid film left behind the drop during retreating of its contact line. Using the contact angle hysteresis an approach is suggested for evaluation of the solid surface free energy. Molecular spacing and the film structure are discussed to explain the difference in n-alkanes and n-alcohols behaviour as well as to explain the difference between dispersion free energy gamma(s)(d) and total surface free energy gamma(s)(tot) of FC-732, as determined from the advancing contact angles and the hysteresis, respectively.     

Concise and Efficient Synthesis of Dehydropeptide Analogues from Unsaturated 5（4H）—Oxazolone

Some dehydropeptide analogues were directly synthesized by the reaction of unsaturated oxazolones with free amino acids.     

Influence of drawing and heat treatment on surface free energies of polyethylene terephthalate fibers

The surface free energies of polyethylene terepthalate fibers with different draw ratios were experimentally determined by contact angle measurements inn-alkane/water systems. The dispersive component of the surface free energy increased with increasing draw ratio, whereas the nondispersive one remained almost constant. After heat treatment, the dispersive surface free energy increased, but was reduced above 140°C. The nondispersive component increased by heat treatment at 190°C. The increases in the density and birefringence of the fibres due to the drawing and heat treatment suggested that the increase in the dispersive surface free energy was caused by the increase in the atomic density at the fiber surface due to drawing and heat treatment. ESCA results indicated that the increment in the nondispersive surface free energy due to heat treatment was caused by the addition of functional groups to the fiber surface due to heat treatment.