综合微光测试系统的总体设计

描述一种微光像增强器综合测试系统的总体设计。设计采用了组合结构，使系统只用单一的光源就可以测试微光像增强器九项光量子类和几何类的参数，具有以往几台常规测试仪器功能的总和。系统对各参数测量的不确定度２～４％。     

强激光装置中玻璃疵病在线检测的光学系统设计

介绍了一种用于玻璃疵病在线检测的近摄工作距成像光学系统,其光组结构形式采用了光阑后置的准远心结构形式,主要光学参量为f′=14 mm;在物像距为250 mm约束条件下,物方视场达到90 mm（对角线）;F/number=3.56;光谱适应范围为400~800 nm,对应的空间分辨率为100 lp/mm时,调制传递函数大于0.29.     

多孔径扫描波面恢复技术的精度评定及影响因素

多孔径扫描波面恢复技术是一项新的高精度大孔径面形检测手段.本文从建立波面恢复精度的评价标准出发,结合实测结果进行讨论,并对影响精度的两个重要因素即拼接模式及拼接区大小进行分析.     

集中荷载下叠合梁抗剪强度

本文对低叠合面钢筋破简支在合梁二阶段受力的斜截面抗剪性能进行了试验研究，并运用非线性有限元分析和试验实测数据，得出了一个适合于集中荷载下高低叠合面叠合梁的抗剪强度计算公式．     

线性滑轨支撑微型斯特林制冷机的开发及性能调试

介绍了独立开发的采用线性滑轨支撑的微型整体式斯特林制冷机,对结构设计的要点进行了详尽的分析,指出采用线性滑轨支撑将大大改善旋转电机驱动斯特林制冷机的可靠性.文中还介绍了对影响制冷机性能特性的因素进行综合试验的情况.     

Evaluation of aortic stenosis severity using 4D flow jet shear layer detection for the measurement of valve effective orifice area

Aims

The objective of this study was to evaluate the potential of 4D flow MRI to assess valve effective orifice area (EOA) in patients with aortic stenosis as determined by the jet shear layer detection (JSLD) method.

Methods and Results

An in-vitro stenosis phantom was used for validation and in-vivo imaging was performed in 10 healthy controls and 40 patients with aortic stenosis. EOA was calculated by the JSLD method using standard 2D phase contrast MRI (PC-MRI) and 4D flow MRI measurements (EOA_JSLD-2D and EOA_JSLD-4D, respectively). As a reference standard, the continuity equation was used to calculate EOA (EOA_CE) with the 2D PC-MRI velocity field and compared to the EOA_JSLD measurements. The in-vitro results exhibited excellent agreement between flow theory (EOA = 0.78 cm²) and experimental measurement (EOA_JSLD-4D = 0.78 ± 0.01 cm²) for peak velocities ranging from 0.9 to 3.7 m/s. In-vivo results showed good correlation and agreement between EOA_JSLD-2D and EOA_CE (r = 0.91, p < 0.001; bias: − 0.01 ± 0.38 cm²; agreement limits: 0.75 to − 0.77 cm²), and between EOA_JSLD-4D and EOA_CE (r = 0.95, p < 0.001; bias: − 0.09 ± 0.26 cm²; limits: 0.43 to − 0.62 cm²).

Conclusion

This study demonstrates the feasibility of measuring EOA_JSLD using 4D flow MRI. The technique allows for optimization of the EOA measurement position by visualizing the 3D vena contracta, and avoids potential sources of EOA_CE measurement variability.     

微波溶样ICP-AES法测定甘肃东紫苏中的无机元素

将正交试验和方差分析应用于微波溶样ICP-AES法测定东紫苏地上部分K, Na, Ca, Ba, Pb, Zn, Mn, Cu, Mg, Fe和Al等无机元素的分析中,此方法简单、快速、灵敏度高、准确性好,且多种元素可同时测定,该方法的加标回收率为93.2%～104.1%, RSD(n=5)＜3.20%。结果表明: 东紫苏中含有丰富的对人体有益的微量元素,此结果可为探讨东紫苏中元素含量与其药效的相关性提供理论依据。     

可接入射频半实物的试验数据转换系统设计与实现

试验环节是产品研制生命周期中的重要环节,但是一直以来都缺乏有效的管理手段,在整个测试阶段都存在大量的人为的、重复性的工作,导致试验效率低下,为改善这一现状,提高试验效率,提出了一种基于PXIe数据采集系统,借助LabVIEW和DIAdem软件的测试系统解决方案：以LabVIEW控制数据高速同步采集,DIAdem调用LabVIEW模块执行算法分析,通过软件集成,实现对测试系统的全面管理,包括数据采集、数据检索、数据分析、报表生成及整个流程的自动化控制。本文以C919飞机电源测试系统为介绍对象,对该套测试系统解决方案进行阐述,实际测试情况表明,在数据吞吐率大于200M/S的情况下,相对传统测试方法,该测试方案在保证测试精度的基础上,极大的提高了试验效率,极大的提高了系统的可扩展性和可维护性。     

Memcapacitor model and its application in a chaotic oscillator

A memcapacitor is a new type of memory capacitor. Before the advent of practical memcapacitor, the prospective studies on its models and potential applications are of importance. For this purpose, we establish a mathematical memcapacitor model and a corresponding circuit model. As a potential application, based on the model, a memcapacitor oscillator is designed, with its basic dynamic characteristics analyzed theoretically and experimentally. Some circuit variables such as charge, flux, and integral of charge, which are difficult to measure, are observed and measured via simulations and experiments. Analysis results show that besides the typical period-doubling bifurcations and period-3 windows, sustained chaos with constant Lyapunov exponents occurs. Moreover, this oscillator also exhibits abrupt chaos and some novel bifurcations.In addition, based on the digital signal processing(DSP) technology, a scheme of digitally realizing this memcapacitor oscillator is provided. Then the statistical properties of the chaotic sequences generated from the oscillator are tested by using the test suit of the National Institute of Standards and Technology(NIST). The tested randomness definitely reaches the standards of NIST, and is better than that of the well-known Lorenz system.     

透镜初级球差的横向剪切干涉条纹研究

利用玻璃平行平板构成简单的横向剪切干涉仪可以观察到单薄透镜形成的准直光束的剪切干涉条纹,由干涉条纹分布求出对应的几何像差和离焦量.用焦距为190 mm的单薄透镜做实验,实验结果与计算机模拟结果符合,说明可以从剪切干涉条纹的分布求出透镜的轴向调整误差和初级球差.