Substituent Effects on the C-C Bond Strength, 15[1] Geminal Substituent Effects, 7[2]. Thermochemistry and Thermal Decomposition of Alkyl-substituted Tricyanomethyl Compounds

The thermolysis reactions of the tricyanomethyl compounds 10a-c were studied in solution. 2,2-Dicyano-3-methyl-3-phenylbutyronitrile ( 10a ) and 2,2-dicyano-3-methyl-3-(4-nitrophenyl)butyronitrile ( 10b ) decomposed heterolytically into carbenium ions and (CN)₃C⁻ anions, while 9-methyl-9-(tricyanomethyl)fluorene ( 10c ) underwent about 11% homolytic C-C bond cleavage into 9-methyl-9-fluorenyl- and tricyanomethyl radicals. The rates of the homolysis were determined by a radical scavenger procedure under conditions of pseudozero order kinetics. From the temperature effect on the rate constants the activation parameters were determined [ΔH ( 10c ) = 155· 2 kJ mol⁻¹, ΔS ( 10c ) = 58· 5 J mol⁻¹ K⁻¹]. Standard enthalpies of formation ΔH (g) were determined for 2,2-dicyanopropionitrile ( 2 ) (422.45 kJ mol⁻¹), 2,2-dicyanohexanenitrile ( 3 ) (349.74 kJ mol⁻¹), 2,2-dicyano-3-phenylpropionitrile ( 4 ) (540.75 kJ mol⁻¹), 2-butyl-2-methylhexanentrile ( 5 ) (-133.20 kJ mol⁻¹), 2,2-dimethylpentanenitrile ( 6 ) (-45.78 kJ mol⁻¹), and 2-methylbutyronitrile ( 7 ) (2.44 kJ mol⁻¹) from the enthalpies of combustion and enthalpies of sublimation/vaporization. From these data and known Δ (g) values for alkanenitriles and -dinitriles, thermochemical increments for ΔH (g) were derived for alkyl groups with one, two, or three cyano groups attached. The comparison of these increments with those of alkanes reveals a strong geminal destabilization, which is interpreted by dipolar repulsions between the cyano groups. - From ΔH (g) of 10c and ΔH of its homolytic decomposition the radical stabilization enthalpy for the tricyanomethyl radical 1 RSE ( 1 ) = -18 kJ mol⁻¹ was determined. Thus, 1 is destabilized, in comparison with the RSEs of tertiary α-cyanalkyl (23 kJ mol⁻¹) and α,α-dicyanoalkyl (27 kJ mol⁻¹) radicals, which were recalculated from bond homolysis measurements^[4] and the new thermochemical data. This change of RSE on increasing the number of α-cyano groups is discussed as the result of the additive contributions by resonance stabilization and increasing destabilization by dipolar repulsion. The amount of the dipolar energies was estimated by molecular mechanics (MM2).     

Delphinidin–Aluminum(III) Complexes in Aqueous and Non-Aqueous Media: Spectroscopic Characterization and Theoretical Study

Summary. The study of delphinidin complexation with trivalent aluminum in acidic aqueous buffered (pH 3.0 and 3.8) and methanolic solutions was performed utilizing electronic absorption spectroscopy and quantum chemical calculations. In its structure delphinidin possesses several chelating sites in competition towards aluminum(III). Molar ratio plots denoted the formation of only one aluminum(III):delphinidin complex of stoichiometry of 1:1 in both investigated media. Semiempirical calculations, performed at the restricted HF AM1 level, enabled the determination of the structural features of free delphinidin and structural modifications caused by chelation of aluminum(III). Considering the pigment molecular structure and the results of the theoretical calculations it is possible to equally implicate C3′–C4′ and C4′–C5′ hydroxyl groups as those with the predominant chelating power.     

STUDIES OF THE HOMOLOGATION OF METHANE ONSUPPORTED TRANSITION METAL CATALYSTS

Introduction0ncofthcintriguingpr0blcmsinhctcrogcncouscatal}'sisisthcactit'ationanddircctconversionofmcthancintoliquidfucIanduscful.h..i..l,lllMcthancactivationisvcry'difficultbccauscn1cthancisathcrmod}'namicalI}'stablccompoundt`ithanoblcgas-likcconfigurati0nThcvcry'strongtctrahcdralC-Hbonds(435kJ/mol)offcrnofiJnctionalgroups,magncticm0mcnts'orpolardistortionstofacilitatcchcmicalattackThismakcsmcthanelcssrcactivcthanncarl}'allitsconvcrsionproducts.Rccentl}'oxidativccouplinghasbecnconsidcrcda…     

Diborane (4) derivatives via coupling of amine monobromocyanoboranes: Study of the bromination of amine cyanoborane and molecular structures of the amine dibromocyanoboranes

The first examples of diborane (4) compounds derived from amine cyanoboranes are described. A series of monobromo derivatives of amine cyanoboranes (A:BHBrCN), and dibromo derivatives (A:BBr₂CN), 1-7, were prepared. Lithiation of the monobromo derivative of trimethylamine cyanoborane, using n-BuLi, did not produce the C-lithiated intermediate Li⁺ [CH₂NMe₂BHBrCN]⁻, but instead the B-lithiated intermediate Li⁺ [Me₃NBHCN]⁻, was obtained. This intermediate, when allowed to react for 16 h, coupled with the un-lithiated trimethylamine monobromocyanoborane (Me₃NBHBrCN) and resulted in diborane (4) derivative formation as the 2LiBr complex. The same result was obtained when one equiv of the trimethylamine monobromocyanoborane was added to the reaction mixture 1 h after lithiation. Following the same procedure, novel diborane (4) derivatives of amine cyanoboranes were successfully obtained, 8-11, as their 2LiBr complexes from the monobromo derivatives of the corresponding amine cyanoboranes. Molecular structures of the trimethylamine dibromocyanoborane, 6, and the triethylamine dibromocyanoborane, 7, were determined using X-ray crystallography.     

Neighbouring group participation in formation of condensed azines. Formation of pyrazolo(3,4-b)pyrazines,isoxazolo(4,5-b)pyrazines and isothiazolo(5,4-b)pyridine

Pyrazine- and pyridinecarboxamidoximes with an amino, potentially tautomeric hydroxy or mercapto group inortho position could be transformed in the appropriate condensed azines. In this manner, representatives of pyrazolo(3,4-b)pyrazine, isoxazolo(4,5-b)pyrazine and isothiazolo(5,4-b)pyridine ring system were synthesized and some transformations investigated.Presented in part at the 8th International Congress of Heterocyclic Chemistry, Graz, 1981.     

Thermochemische Untersuchungen zu den Systemen Ti/Ni und Ti/Co

Thermochemical Investigations of the Systems Ti/Ni and Ti/Co By treatment of solid Ni or Co with a H₂/TiCl₄-gas mixture at sufficient high temperature (T ≥ 900°C) the intermetallic phases TiNi₃ and TiCo₃, resp., are formed. The conversion grade depends on the H₂/TiCl₄-ratio. From the experimentally determined conversion grades and the known thermodynamic data of all other species existing in equilibrium the free enthalpies and the heats of formation of TiN₃ and TiCo₃ have been calculated (TiNi₃: ΔH(298) = ?133.3 ± 6 kJ/mol; TiCo₃: ΔH(298) = ?104.7 ± 6 kJ/mol).     

Enthalpic determinations of aliphatic ester-solvent systems with correlations

Calorimetric measurements were carried out on ester-solvent systems where the esters were H(CH₂)_xCOO(CH₂)_yH, with x and y varying from 1 to 5, and the solvents were n-hexane and 1,2-dichloroethane. Calculation of the enthalpies of cavity formation enabled the enthalpies of interaction to be determined. Both enthalpies correlated with number of carbon atoms N, equal to x+y in the esters, giving for 1,2-dichloroethane

富烯碳原子簇的石墨层间闭合形成机理

本文提出了富烯碳原子簇的石墨层间闭合形成机理，由该机理推出的许多结果与实验事实符合很好。我们认为碳原子簇自由基的快速淬灭及其淬灭速度是富烯碳原子簇形成及其丰度的决定因素。由此得出富烯碳原子簇在给定实验条件下产生的必然性，并预言不同大小的富烯碳原子簇可以通过优化实验条件选择性地合成。     

Thick Silicate Film by an Interfacial Polymerization

A thick silica gel film, corresponding to the glass film of 10–20 micron in thickness, has been formed at the interface between two immiscible liquids, hexane and water, using E-40, a partially polymerized silicon alkoxide, as the precursor. The film formation was possible using both acid- and base-catalyzed water, but was greatly dependent on the type of catalyst. Only the trace of a film was observed for the system catalyzed with a strong electrolyte such as HCl, HNO₃ or NaOH, while a gel film, corresponding to the glass film of several to 10 micron in thickness was formed with a weak electrolyte such as ammonia, organic acid like acetic acid, citric acid, etc., of similar pH value. The direct introduction of organic base catalyst like triethylamine in hexane was much more effective than the use of ammonia water, suggesting that the polymerization of E-40 to form a gel film takes place in the organic phase, where water molecules, as well as undissociated ammonia or organic acids, can diffuse in.     

Electrocatalytic properties of surface oxides on gold,platinum, and stainless steel electrodes in electrooxidation of malic acid

Electrocatalytic properties of oxides formed at gold, platinum, and stainless steel electrodes in the malic acid electrooxidation in 0.1 M Na₂SO₄ are studied. Gas chromatographic analysis of the electrolyte after holding the potential at 1.0 V for 8 h shows that on platinum and gold electrodes 2 mmol of acetaldehyde are produced and on stainless steel, 45 mmol. The acetaldehyde yield is the highest on stainless steel.From Elektrokhimiya, Vol. 41, No. 3, 2005, pp. 304–309.Original English Text Copyright © 2005 by Avramov Ivi, Popi, Antonovi.This article was submitted by the authors in English.