牛血清白蛋白与十二烷基硫酸钠作用的机理

利用电动势法得到了牛血清白蛋白(BSA)与十二烷基硫酸钠(SDS)相互作用的结合等温线. 通过四阶导数紫外光谱法和荧光光谱法研究了相互作用过程中芳香族氨基酸残基微环境极性的变化. 通过研究发现, 随着SDS浓度的逐渐增大, SDS在BSA上的平均结合数(v)逐渐增大, 色氨酸(Trp)残基所处微环境的极性在减弱后保持基本不变, 酪氨酸残基所处微环境的极性在明显增强后稍有减弱, 苯丙氨酸残基所处微环境的极性略有增强. 结果表明, 当v由0增大到14时, SDS主要结合在BSA的Trp-213附近并逐渐形成聚集体, 从而诱导BSA由结构域ⅡA 开始逐渐展开. 此后, SDS呈正协同作用的特点与BSA 结合, v急剧增大. 当v约为302 时, SDS在BSA上的结合基本达到饱和, BSA的构象趋于稳定.     

Growth of silica nanoparticles in methylmethacrylate-based water-in-oil microemulsions

The mechanism of silica particle formation in monomer microemulsions is studied using dynamic light scattering (DLS), atomic force microscopy, small-angle X-ray scattering (SAXS), and conductivity measurements. The hydrolysis of tetraethylorthosilicate (TEOS) in methylmethacrylate (MMA) microemulsions (MMA = methylmethacrylate) is compared with the formation of SiO₂ particles in heptane microemulsions. Stable microemulsions without cosurfactant were found for MMA, the nonionic surfactant Marlophen NP10, and aqueous ammonia (0.75 wt%). In the one-phase region of the ternary phase diagram, the water/surfactant ratio (R _w) could be varied from 6 to 18. The DLS and SAXS measurements show that reverse micelles form in these water-in-oil (w/o) microemulsions. The minimum water-to-surfactant molar ratio required for micelle formation was determined. Particle formation is achieved from the base-catalyzed hydrolysis of TEOS. According to atomic force microscopy measurements of particles isolated from the emulsion, the particle size can be effectively tailored in between 20 and 60 nm by varying R _w from 2–6 in heptane w/o microemulsions. For MMA-based microemulsions, the particle diameter ranges from 25 to 50 nm, but the polydispersity is higher. Tailoring of the particle size is not achieved with R _w, but adjusting the particle growth period produces particles between 10 and 70 nm.     

Proton transfer reactions from N-H acid [5,10,15,20-tetrakis(pentafluorophenyl)-21-H, 23-H-porphyrin] to strong bases in acetonitrile

Deprotonation of 5,10,15,20-tetrakis(pentafluorophenyl)-21-H, 23-H-porphyrin (PhF₅PorH₂) by various bases has been studied by ¹H NMR and kinetic methods. The kinetic parameters in acetonitrile were defined for proton transfer reactions yielding [NH]⁺ protonated bases and [NHN]⁻ anions with intramolecular hydrogen-bonded chains.     

失效原子力显微镜硅针尖再生

原子力显微镜的传统商品硅针尖在使用过程中极易因磨损而失效，本文研究了一种在实验室条件下简易可行的回收利用失效硅针尖的方法。在原子力显微镜的敲击模式下使用曲率半径大于100 nm的失效硅针尖对生长单壁碳纳米管的样品表面进行扫描，把样品表面的单壁碳纳米管管束粘接到硅针尖上，可制得直径在5～20 nm的碳纳米管针尖。实验对碳纳米管针尖和新的商品硅针尖进行了成像对比，所制备的碳纳米管针尖不仅在成像分辨率而且在成像稳定性上都优于新的商品硅针尖。     

Application of fractal geometry for studies of heterogeneity properties of nanomaterials

Calculations based on the fractal geometry in the estimation of surface heterogeneity are superior compared with conventional calculation methods (e.g. from the data of gas adsorption or X-ray radiation scattering) as they can be applied without limitation as far as the range of surface sizes of the studied structures is concerned. This paper presents structural characteristics of carbon and carbon- free nanomaterials based on the determined surface and volumetric fractal coefficients. Fractal coefficients were determined from the data obtained by means of two independent methods: sorptometry and atomic force microscopy (AFM). Correlation between porosity parameters and fractal coefficients is presented.     

环多肽晶体的浮动电荷极化力场模拟

利用原子键电负性均衡结合分子力场方法(ABEEM/MM)对五种环多肽晶体进行了研究. 与传统力场相比, 该方法中的静电势包含了分子内和分子间的静电极化作用, 以及分子内电荷转移影响, 同时加入了化学键等非原子中心电荷位点, 合理地体现了分子中的电荷分布. 相对其他极化力场模型, 具有计算量较小的特点. 该模型下计算得到的环多肽分子单元相对实验测得的结构的原子位置、氢键长度和二面角的均方根偏差分别为0.009 nm、0.013 nm和5.16°, 能够很好地重复实验结果. 总体上, 其结果优于或相当于其他力场模型, 适用于对实际蛋白质体系的模拟和研究.     

N-苄叉基-1-氨基-萘及其类似物的构象与分子扭曲的共轭 驱动力

确定了N-[(4-二甲基氨基)-苄叉基]-2-氨基苯并咪唑(1)，N-[(4-二甲基氨基)-苄叉基]-2-氨基苯并噻唑(2)和N-苄叉基-1-氨基-萘(3)的晶体结构。利用AM1，RHF，DFT方法和STO-3G,4-31G,6-311G及6-311G基组，优化每个分子的23个扭曲构象(θ=0°～-89°)。尽管不同方法得到的最优构象的扭角不同，分子扭曲的驱动力总是起因于电子作用，在任一分子、任何电子态中，离域的π体系总是失稳定的，全平面构象不是π体系最稳定的构象。π电子的离域是分子扭曲的驱动力之一，与经典观点相反，非键原子间的核排斥作用是分子扭曲的阻力，而不是动力。     

The effect of electrochemically treated glassy carbon on the activity of supported Pt catalyst in methanol oxidation

Effect of electrochemical oxidation of glassy carbon on deposition of platinum particles and electrocatalytic activity of platinum supported on oxidized glassy carbon (Pt/GC_OX) were studied for methanol oxidation in H₂SO₄ solution. Platinum was potentiostatically deposited from H₂SO₄ + H₂PtCl₆ solution. Glassy carbon was anodically polarised in 0.5 M H₂SO₄ at 2.25 V vs. saturated calomel electrode (SCE) during 35 s. Electrochemical treatment of GC support, affecting not significantly the real Pt surface area, leads to a better distribution of platinum on the substrate and has remarkable effect on the activity. The activity of the Pt/GC_OX electrode for methanol oxidation is larger than polycrystalline Pt and for more than one order of magnitude larger than Pt/GC electrode. This increase in activity indicates the pronounced role of organic residues of GC support on the properties of Pt particles deposited on glassy carbon.     

Synthesis and properties of novel polyurethanes containing 3,4‐dioxybenzylidenecyanoacetate group as a nonlinear optical chromophore

Methyl 3,4‐di‐(2′‐hydroxyethoxy)benzylidenecyanoacetate ( 3 ) was prepared by hydrolysis of methyl 3,4‐di‐(2′‐vinyloxyethoxy)benzylidenecyanoacetate ( 2 ). Diol 3 was condensed with 2,4‐toluenediisocyanate, 3,3′‐dimethoxy‐4,4′‐biphenylenediisocyanate, and 1,6‐hexamethylenediisocyanate to yield polyurethanes 4 – 6 containing the nonlinear optical chromophore 3,4‐dioxybenzylidenecyanoacetate. The resulting polyurethanes 4 – 6 were soluble in common organic solvents such as acetone and dimethylformamide. Polymers 4 – 6 indicated thermal stability up to 300 °C in thermogravimetric thermograms with glass‐transition temperature values obtained from differential scanning calorimetric thermograms in the range of 78–102 °C. The second‐harmonic generation coefficients (d₃₃) of the poled polymer films were around 6.9 × 10^?9 esu. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1742–1748, 2002     

Scanning force microscopy based rapid force curve acquisition on supported lipid bilayers: experiments and simulations using pulsed force mode.

In situ pulsed force mode scanning force microscopy (PFM-SFM) images of phase separated solid-supported lipid bilayers are discussed with the help of computer simulations. Simultaneous imaging of material properties and topography in a liquid environment by means of PFM-SFM is severely hampered by hydrodynamic damping of the cantilever. Stiffness and adhesion images of solid-supported membranes consisting of cholesterol, sphingomyelin, and 1,2-dioleyl-phosphatidylcholine obtained in aqueous solution exhibit contrast inversion of adhesion and stiff. ness images depending on parameters such as driving frequency, amplitude, and trigger setting. Simulations using a simple harmonic oscillator model explain experimental findings and give a deeper insight into the way PFM-SFM experiments have to be performed in order to obtain interpretable results and hence pave the way for reliable material contrast imaging at high speed.