Evolution of downsized crescent-shaped dune in wind tunnel experiment

The migration of a downsized crescent-shaped dune was investigated in a wind tunnel experiment.Quantified upwind influx and vertical oscillation of the sand bed were introduced to modulate the saturation level of the sand flux above the dune surface to affect dune evolution.The evolution was recorded by top-view photography and then abstracted as the evolution of self-defined characteristic quantities using a digital image processing algorithm.The results showed that,in contrast to the case for spanwise quantities,the evolution of streamwise quantities corresponds to a linear increase in the modulation magnitude more positively and in a monotonic and convergent manner.In contrast with quantities on the windward face,the changes in quantities with respect to the horns were nonmonotonic with time and almost uncorrelated with the variation in modulation strength,which reveals the distinctiveness of leeside evolution.     

Critical Heat Flux for Downward Facing Boiling on a Coated Hemispherical Surface

An experimental study was performed to investigate the effect of surface coating on the critical heat flux for downward facing boiling on the outer surface of a hemispherical vessel. Steady-state boiling experiments were conducted in the subscale boundary layer boiling (SBLB) facility using test vessels with metallic microporous coatings to obtain the local boiling curves and the local critical heat flux (CHF) limits. Similar heat transfer performance was observed for microporous aluminum and microporous copper coatings. When compared to the corresponding data without coatings, the boiling curves for the coated vessels were found to shift upward and to the right. This meant that the CHF limit was higher with surface coating and that the minimum film boiling temperatures were located at higher wall superheats. In particular, the microporous coatings were found to enhance the local CHF values appreciably at all angular locations explored in the experiments. Results of the present study showed that the microporous aluminum coating was very durable. Even after many cycles of steady state boiling, the vessel coating remained rather intact, with no apparent changes in color or structure. Although similar heat transfer performance was observed for microporous copper coatings, the latter were found to be much less durable and tended to degrade after several cycles of boiling.     

A new approach in modeling of constant temperature boundary condition in thermal lattice‐Boltzmann method

The lattice‐Boltzmann method is being applied to a diversity of fluid flow and heat transfer problems nowadays. Because of its microscale nature, strict attention should be paid when introducing macroscopic inputs to the model. One of the challenging issues dealing with macroscale and microscale treatment is the implementation of boundary conditions. In this regard constant‐temperature boundaries are frequently used in energy transfer problems. Such boundaries are simply modeled in Navier–Stokes based solvers, but they are not so harnessed in lattice‐Boltzmann models. One of the problems is that the calculated tangential heat flux is not zero along such boundaries in most of the previous models. In the present paper, a model has been developed, which has the capability of controlling tangential heat flux along the constant‐temperature boundaries. It aims to set the heat flux nearly zero along the boundary in midplane grid schemes. Copyright © 2012 John Wiley & Sons, Ltd.     

Thermal measurements using ultrasonic acoustical pyrometry

Reflections from geometric discontinuities can be used with ultrasonic energy to predict the temperature of an interface where classical temperature measurement techniques are impractical because of physical access limitations or harsh environmental conditions. Additionally, these same ultrasonic measurements can be used with inversion methods commonly applied to ill-posed heat transfer problems to increase the accuracy of the measurement of surface temperature or heat flux at the surface of interest. Both methods for determining surface temperature are presented, along with a comparison of results both from a verification example and using data gathered in a field test of the methods. The results obtained with these two methods are shown to be in good agreement with an empirical relationship used in the design of large caliber guns.     

Micellar Enhanced Ultrafiltration of Reactive Black 5 from Aqueous Solution by Cationic Surfactants

Reactive black 5 (RB-5) dye was removed from a water stream using two cationic surfactants, cetyltrimethylammonium bromide (CTAB) and cetylpyridinium chloride (CPC), via micellar enhanced ultrafiltration. Three membranes with different pore size were used for the determination of rejection coefficient and permeate flux of the solution at 1.5 bar trans-membrane pressure (TMP). The two surfactants (CPC and CTAB) played an almost negligible role in rejection efficiency with 5000 and 10,000 molecular weight cut-off membrane (MWCO), respectively. In this case, high rejection and low permeate flux was the result of a larger molecular size of RB-5 DYE being retained by comparatively smaller sized pores of membrane via ultrafiltration. However, CPC and CTAB surfactants showed 83% and 98% rejection coefficient, respectively, at a concentration greater than their CMC values against 30,000 MWCO. Permeate flux remained low and constant in presence of 5000 and 10,000 MWCO with a small variation against 30,000 MWCO for the two surfactants, thereby no appreciable effect on both surfactant concentrations on concentration polarization was estimated. Thus, RB-5 dye alone was determined to be responsible for membrane plugging or concentration polarization and ultimately for low permeate flux. The effect of trans-membrane pressure was also investigated during this study.     

On critical parameters in homogenization of perforated domains by thin tubes with nonlinear flux and related spectral problems

Let u_? be the solution of the Poisson equation in a domain perforated by thin tubes with a nonlinear Robin‐type boundary condition on the boundary of the tubes (the flux here being β(?)σ(x,u_?)), and with a Dirichlet condition on the rest of the boundary of Ω. ? is a small parameter that we shall make to go to zero; it denotes the period of a grid on a plane where the tubes/cylinders have their bases; the size of the transversal section of the tubes is O(a_?) with a_???. A certain nonperiodicity is allowed for the distribution of the thin tubes, although the perimeter is a fixed number a. Here, is a strictly monotonic function of the second argument, and the adsorption parameter β(?) > 0 can converge toward infinity. Depending on the relations between the three parameters ?, a_?, and β(?), the effective equations in volume are obtained. Among the multiple possible relations, we provide critical relations, which imply different averages of the process ranging from linear to nonlinear. All this allows us to derive spectral convergence as ?→0 for the associated spectral problems in the case of σ a linear function of u_?. Copyright © 2014 John Wiley & Sons, Ltd.     

Diels-Alder reaction mechanisms of substituted chiral anthracene: A theoretical study based on the reaction force and reaction electronic flux

Quantum chemical calculations were used to study the mechanism of Diels-Alder reactions involving chiral anthracenes as dienes and a series of dienophiles. The reaction force analysis was employed to obtain a detailed scrutiny of the reaction mechanisms, it has been found that thermodynamics and kinetics of the reactions are quite consistent: the lower the activation energy, the lower the reaction energy, thus following the Bell-Evans-Polanyi principle. It has been found that activation energies are mostly due to structural rearrangements that in most cases represented more than 70% of the activation energy. Electronic activity mostly due to changes in σ and π bonding were revealed by the reaction electronic flux (REF), this property helps identify whether changes on σ or π bonding drive the reaction. Additionally, new global indexes describing the behavior of the electronic activity were introduced and then used to classify the reactions in terms of the spontaneity of their electronic activity. Local natural bond order electronic population analysis was used to check consistency with global REF through the characterization of specific changes in the electronic density that might be responsible for the activity already detected by the REF. Results show that reactions involving acetoxy lactones are driven by spontaneous electronic activity coming from bond forming/strengthening processes; in the case of maleic anhydrides and maleimides it appears that both spontaneous and non-spontaneous electronic activity are quite active in driving the reactions.     

Diversity of Strontium Nitridogermanates(IV): Novel Sr4[GeN4], Sr8Ge2[GeN4], and Sr17Ge2[GeN3]2[GeN4]2

Single crystals of three new strontium nitridogermanates(IV) were grown in sealed niobium ampules from sodium flux. Dark red Sr₄[GeN₄] crystallizes in space group P2₁/c with a = 9.7923(2) Å, b = 6.3990(1) Å, c = 11.6924(3) Å and β = 115.966(1)°. Black Sr₈Ge₂[GeN₄] contains Ge^4– anions coexisting with [Ge^IVN₄]^8– tetrahedra and adopts space group Cc with a = 10.1117(4) Å, b = 17.1073(7) Å, c = 10.0473(4) Å and β = 115.966(1)°. Black Sr₁₇Ge₆N₁₄ features the same anions alongside trigonal planar [Ge^IVN₃]^5– units. It crystallizes in P1 with a = 7.5392(1) Å, b = 9.7502(2) Å, c = 11.6761(2) Å, α = 103.308(1)°, β = 94.651(1)° and γ = 110.248(1)°.     

Intramolecular proton transfer in the isomerization of hydroxyacetone: Characterization based on reaction force analysis and the bond fragility spectrum

The mechanism of isomerization of hydroxyacetone to 2-hydroxypropanal is studied within the framework of reaction force analysis at the M06-2X/6-311++G(d,p) level of theory. Three unique pathways are considered: (a) a step-wise mechanism that proceeds through the formation of the Z-isomer of their shared enediol intermediate, (b) a step-wise mechanism that forms the E-isomer of the enediol, and (c) a concerted pathway that bypasses the enediol intermediate. Energy calculations show that the concerted pathway has the lowest activation energy barrier at 45.7 kcal mol⁻¹. The reaction force, chemical potential, and reaction electronic flux are calculated for each reaction to characterize electronic changes throughout the mechanism. The reaction force constant is calculated in order to investigate the synchronous/asynchronous nature of the concerted intramolecular proton transfers involved. Additional characterization of synchronicity is provided by calculating the bond fragility spectrum for each mechanism.     

Chitosan‐modified graphene oxide as a modifier for improving the structure and performance of forward osmosis membranes

Chitosan (CS) with good hydrophilicity and charged property was used to modify graphene oxide (GO), the obtained GO‐CS was used as a novel modifier to fabricate thin film composite forward osmosis (FO) membranes. The results revealed that the amino groups on CS reacted with carboxyl groups on GO, and the lamellar structure of the GO nanosheets was peeled off by CS, resulting in the reducing of their thicknesses. The GO‐CS improved the hydrophilicity of polyethersulfone (PES) substrate, and their contact angles decreased to 64° with the addition of GO‐CS in the substrate. GO‐CS also increased the porosity of the substrate and surface roughness of FO membrane, thereby optimizing the water flux and reverse salt flux of FO membrane. The average water flux of the FO membrane reached the optimal flux of 21.34 L/(m² h) when GO‐CS addition was 0.5 wt%, and further addition of GO‐CS to the substrate would decrease the water flux of FO membrane, and the reverse salt flux also decreased to the lowest value of 2.26 g/(m² h). However, the salt rejection of the membrane increased from 91.4% to 95.1% when GO‐CS addition increased from 0.5 to 1.0 wt% under FO mode using 1 mol/L sodium chloride (NaCl) solution as draw solution (DS). In addition, high osmotic pressure favored water permeation, and at the same concentration of DS, magnesium chloride (MgCl₂) exhibited better properties than NaCl. These results all suggested that GO‐CS was a good modifier to fabricate FO membrane, and MgCl₂ was a good DS candidate.