消除夹带溶胀的新液膜操作法

消除夹带溶胀的新液膜操作法曹汉瑾，褚莹，何彦涛，吴子生，严忠（东北师范大学化学系长春１３００２４）关键词液膜，油／水乳液，溶胀，夹带，包裹消除液膜操作中的夹带溶胀对液膜的工业化具有重要意义，夹带溶胀分为包裹溶胀和再液化溶胀。前者是乳状液滴上浮时将水相...     

Nanocomposite materials from latex and cellulose whiskers

Composite materials were processed by casting a mixture of aqueous suspensions of latex and microfibrils. These microfibrils, or whiskers, are extracted from a sea animal and are monocrystals of cellulose, with an aspect ratio around 100 and an average diameter of 20 nm. It has been found that the mechanical properties (shear modulus) are increased by more than two orders of magnitude in the rubbery state of the polymeric matrix, when the whisker content was 6% (w/w). This very large effect is discussed on the basis of different types of mechanical models and it is concluded that these whiskers form a rigid network, probably linked by hydrogen bonds. The formation of this network is assumed to be governed by a percolation mechanism.     

Effects of type and number of impellers and liquid viscosity on the power characteristics of mechanically agitated gas—liquid systems

Effect of the type and number of high-speed impellers installed on a common shaft on the power characteristics was investigated in water and glucose solutions of different concentration. Different configurations of the Rushton or Smith turbines, pitched blade turbines, propeller, and A 315 impeller were tested. Measurements of power consumption were carried out within the transitional and turbulent regime of the fluid flow using the strain gauge method. Baffled agitated vessels with inner diameter of 0.288 m and 0.634 m were used for the experiments. Liquid height in the vessels was equal to the vessel diameter or it was twice higher. The relative power consumption was compared for different configurations of the impellers. Presented at the 33rd International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 22–26 May 2006.     

Preparation and properties of polyurethane networks based on α,ω-difunctional poly(hexafluoropropylene oxide)

Poly(hexafluoropropylene oxide), poly(HFPO), networks were prepared from functional polymers by end linking via urethane groups. The prepolymers were characterized by NMR spectroscopy and GPC. The networks were characterized by determination of the number of network chains from the shear modulus, and were snown to contain both trifunctional crosslinks and difunctional links. The properties of the networks were investigated by a range of techniques. Compared with fully-fluorinated networks formed via triazine cross-links, investigated previously, the urethane-linked networks were more readily prepared but were poorer elastomers, were less thermally stable, and were less resistant to swelling by common polar solvents. © 1995 John Wiley & Sons, Inc.     

Determination of alcohol polyether average molar oligomer value/distribution via supercritical fluid chromatography coupled with UV and MS detection

Supercritical fluid chromatography (SFC) was used for the analysis of ethoxylated and propoxylated surfactants. Samples were derivatized to phenylated silyl ethers with a disilazane-chlorosilane mixture. Addition of a phenyl group to the surfactant allowed UV-absorbance detection of each oligomer. Acetonitrile and methanol were evaluated as mobile phase modifiers. Better peak shape was realized with methanol-modified CO2 on an octadecyl silica bonded phase than with acetonitrile-modified CO2. Peak assignments were made via SFC coupled with electrospray ionization-mass spectrometry (ESI-MS) in the positive ion mode. A sulfonamide-embedded alkyl stationary phase was also evaluated for separation of the derivatized samples. SFC-UV and SFC-ESI-MS data were jointly used for calculation of average molar oligomer values which were then compared to values calculated from 1H NMR data of non-derivatized samples. The derivatization or separation method using the sulfonamide embedded phase required no preliminary cleanup and yielded reproducible oligomer values that were consistent with those of the manufacturer's nominal values.     

An attempt on the VOC oxidation using mechanically activated catalyst

A catalytic action of the mechanochemical products of copper hydroxocarbonate with calcium carbonate was investigated in n-butyl alcohol oxidation tests. The solid products of high-energy milling were identified using thermogravimetry supplemented by X-ray diffraction method. It was shown that the mechanical activation induces more effective tested catalyst because it promotes the alcohol conversion at lower temperatures than that unmilled one. This revised version was published online in July 2006 with corrections to the Cover Date.     

Prostaglandin D2 synthase and its post-translational modifications in neurological disorders

Prostaglandin D2 synthase (PGDS) (beta-trace protein) is a highly abundant cerebrospinal fluid (CSF) glycoprotein. A number of studies have been performed to determine the potential value of this protein for the diagnosis of various neurological disorders. The measurement of total PGDS levels in CSF has proved marginally useful for this purpose, but promising results were obtained while investigating changes in the posttranslational modifications (PTM) pattern. Using 2-DE analysis, we previously showed that PGDS is differentially expressed in ante- and post mortem CSF samples. In the present study, we examined whether the PGDS isoforms may help to distinguish stroke and neurodegenerative disease patients from healthy subjects. The pattern of PGDS PTM was analyzed in CSF from patients with various neurological disorders (n = 44) using IEF/immunoblotting techniques. Strong alterations of this pattern were detected in patients with different forms of degenerative dementia. These findings are consistent with PGDS being altered in some neurological diseases and provide new opportunities for clinical applications.     

Vibrational analysis of 3-trifluoromethylphenol

The molecular geometry and molecular vibrations of 3-trifluoromethylphenol have been investigated by means of quantum chemical calculations and vibrational spectroscopy. The computations indicated the preference of the conformer with the OH hydrogen pointing in the direction of the trifluoromethyl group by 0.9 kJ/mol with respect to the anti conformer. FT-IR spectra of the vapour and CCl₄ solution as well as FT-IR and FT-Raman spectra of the pure liquid have been recorded in the range of 4000–150 cm⁻¹. The interpretation of the spectra was based on a scaled quantum mechanical (SQM) analysis for which the initial force field was calculated at the Becke3-Lee-Yang-Parr (B3LYP) DFT level supplemented with a 6-311++G** basis set. Using 11 scale factors refined in the present study an rms deviation of 7.6 cm⁻¹ between the experimental and SQM frequencies has been achieved. On the basis of the computations 40 of the total of 42 fundamentals of the title compound have been assigned.     

Analysis to obtain precise density fluctuation of supercritical fluids by small-angle X-ray scattering

A procedure of analysis for small-angle X-ray scattering (SAXS) data has been established to obtain density fluctuation of supercritical fluids near the critical point. It is indispensable for the certain analysis to utilize both of high-quality SAXS data measured under stable thermodynamic condition and accurate P–ρ–T data in supercritical region. As a standard example, SAXS measurements have been performed for supercritical CO₂, which is a suitable sample satisfying the condition for both experiment and analysis. The measurements were carried out along four isothermal conditions at reduced temperature of T_r = T/T_c = 1.020, 1.022, 1.043 and 1.064. Comparing the experimental density fluctuation with calculated one from the most reliable equation of state, the differences are within 8% at most.