Hydrogen peroxide bleaching of cotton in ultrasonic energy

It is well known that, conventional hydrogen peroxide bleaching process is an important and a specific step for wet processors; however it has some problems such as long time, high energy consumption. On the other hand, using ultrasonic energy in bleaching is an alternative method for the conventional processes.

In this work, 100% cotton materials of different forms such as raw fibre, ring-spun yarns and knitted fabrics produced from these cottons, were treated with hydrogen peroxide in two different concentrations (5 mL/L and 10 mL/L), at three different temperatures (20 °C, 30 °C, 40 °C) and times (20 min, 30 min, 60 min). Whiteness Index of the samples were then measured spectrophotometrically and the overall results were compared.     

基于Oda裂隙结构张量的流纹岩各向异性试验研究

岩石内天然存在长度、倾角和形态不同的裂隙,造成岩石的各向异性特征。为揭示岩石内天然随机裂隙发育特征对岩石物理力学特性的影响规律,以泥巴山隧址区采集裂隙性流纹岩为研究对象,首先对试样裂隙进行素描统计分析;然后基于Oda裂隙结构张量,获得天然随机分布裂隙的几何统计参数;最后对裂隙性流纹岩试样分别进行单轴和常规三轴压缩试验,得到不同应力路径下流纹岩的应力-应变曲线及物理力学参数。分析Oda裂隙结构张量定义的各向异性参数与试验获得的力学参数之间的规律,研究结果表明:(1)Oda裂隙结构张量适用于天然随机分布裂隙的几何统计分析,各向异性参数A(F)越大,裂隙优势方向越明显;(2)单轴压缩下,随着各向异性参数I1和A(F)的增大,流纹岩各向异性程度增大,弹性模量减小,泊松比增大;(3)常规三轴压缩下,流纹岩弹性模量和泊松比随各向异性参数改变的规律较不明显,Oda裂隙结构张量不再适用。     

基于供应方生产能力的应急物资生产模型

利用期权契约所建立的政企合作储备应急物资模式能够有效解决政府单独储备模式所造成的物资储备量过少或过多而引起的困境。然而由于应急物资的需求特性,若应急物资供应企业采用按单生产方式安排生产储备计划,势必会造成库存水平升高,引发资金周转困难等问题,对政企之间的长期合作造成不利影响。基于此,本文设计了基于供应方生产能力的应急物资生产模型。该模型在政府利用批发价格契约与期权契约采购应急物资的基础上,研究了供应方根据自身生产能力进行柔性生产时的生产与储备问题。通过推导政企双方最优决策后,重点分析了期权权利金,执行价格,加急生产成本等参数对供应方生产决策的影响,并证明与按单生产模式相比,柔性生产模式可有效降低供应方的库存量与生产成本,提高其利润,继而提高整体供应链的利润水平,有助于促进政企之间长期稳定的合作。     

Transparent and flexible field emission display device based on single‐walled carbon nanotubes

A fully transparent and flexible field emission device (FED) has been demonstrated. Single‐walled carbon nanotubes (SWCNTs) coated on arylite substrate were used as electron emitters for the FED and a novel metavanadate phosphor coated on the SWCNTs/arylite film was used as transparent and flexible screen. The SWCNTs/arylite based emitters and the SWCNTs/arylite/metal‐vanadate‐based phosphor showed a transmittance value of 92.6% and 54%, respectively. The assembled device also showed satisfactory transparency and flexibility as well as producing significant current. Metavanadate phosphor is considered to be an excellent candidate due to its superior luminescence properties and easy fabrication onto transparent and flexible conductive substrate at room temperature while retaining reasonable transparency of the substrate. Thus, its transparency and flexibility will open the door to next‐generation FEDs. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Palladium nanoparticles/wool keratin-assisted carbon composite-modified flexible and disposable electrochemical solid-state pH sensor

Several p H-dependent processes and reactions take place in the human body;hence,the p H of body fluids is the best indicator of disturbed health conditions.However,accurate and real-time diagnosis of the p H of body fluids is complicated because of limited commercially available p H sensors.Hence,we aimed to prepare a flexible,transparent,disposable,userfriendly,and economic strip-based solid-state p H sensor using palladium nanoparticles(Pd NPs)/N-doped carbon(NC)composite material.The Pd NPs/NC composite material was synthesized using wool keratin(WK)as a precursor.The insitu prepared Pd NPs played a key role in the controlled switching of protein structure to the N-doped carbon skeleton withπ–πarrangement at the mesoscale level,which mimics the A–B type polymeric structure,and hence,is highly susceptible to H+ions.The optimized carbonization condition in the presence of Pd NPs showed that the material obtained using a modified Ag/Ag Cl reference electrode had the highest p H sensitivity with excellent stability and durability.The optimized p H sensor showed high specificity and selectivity with a sensitivity of 55 m V/p H unit and a relative standard deviation of 0.79%.This study is the first to synthesize Pd NPs using WK as a stabilizing and reducing agent.The applicability of the sensor was investigated for biological samples,namely,saliva and gastric juices.The proposed protocol and material have implications in solid-state chemistry,where biological material will be the best choice for the synthesis of materials with anticipated performance.     

柔性铰链微位移机构在可调谐F-P滤波器中的应用研究

分析了由于反射镜倾斜导致的可调谐F-P(Fabry-Perot)滤波器失谐。设计了一种柔性铰链式微位移机构,由压电陶瓷驱动,采用平行四连杆机构进行传动导向。采用该机构驱动F-P腔镜扫描克服了直接使用压电陶瓷带来的腔镜倾斜问题。该机构已应用于可调谐F-P滤波器中,输出信号多周期峰值幅度均匀,重复性好。     

柔性ITO衬底电化学沉积制备Cu/Cu2O薄膜

研究了使用电化学沉积法于碱性条件下在柔性ITO衬底上制备Cu/Cu₂O薄膜的方法。循环伏安曲线表明Cu₂O与Cu的阴极峰分别位于-500 mV(vs Ag/AgCl)和-800 mV(vs Ag/AgCl)附近。利用循环伏安法考察了生长温度和电解液pH值等对Cu₂O与Cu阴极峰电位的影响,阴极峰随生长温度的升高以及pH值的降低而略向阳极移动,沉积电流也随之相应增大。与弱酸性条件相比,上述两个阴极峰随pH值升高而移动的程度明显减小,这可能与碱性条件下C₃H₆O电离程度增大以及C₃H₆O根作为配体的过量程度有关。通过X射线衍射光谱和扫描电子显微镜的表征证实,在所研究的生长温度区间和pH值内可利用电化学沉积法在柔性ITO衬底上制备Cu/Cu₂O纳米混晶薄膜。在相同的生长温度和pH条件下,电化学沉积电位对样品表面形貌和晶体性质具有较大影响。     

适用于金属薄板焊接的柔性光纤耦合半导体激光加工光源

研制了一种单光纤耦合的柔性半导体激光加工光源,该光源由20个传导热沉封装的激光列阵以线阵合束方式耦合而成,在大通道工业水冷条件下,从600 μm芯径、NA为0.2的光纤中连续输出907 W功率,输出光束质量为47 mm·mrad,最终达到工件表面的功率密度为3.21×10⁵ W/cm²,最大插头效率达39%。该激光光源具有直接应用在金属薄板焊接的潜力。     

KOH活化废弃麻制备活性炭及其结构表征

以日常生活中废弃麻纺品为原料, KOH为活化剂, 采用炭化和活化两步法制备麻质活性炭(LAC). 采用比表面积测定仪在77 K下测定其N2吸附-脱附等温线, 通过Langmuir方程、BET方程和BJH法计算其比表面积、孔体积和孔径分布. 结果表明, 麻质活性炭的BET比表面积为1387.473 m2/g, Langmuir比表面积为1790.573 m2/g, 吸附累积总孔容达0.415 cm3/g; 采用扫描电子显微镜(SEM)、X射线衍射分析仪以及红外光谱仪对麻质活性炭的结构进行了表征, 分析其表面形貌、微观结构及表面化学官能团.     

Quality of random number generators significantly affects results of Monte Carlo simulations for organic and biological systems

We have simulated pure liquid butane, methanol, and hydrated alanine polypeptide with the Monte Carlo technique using three kinds of random number generators (RNG's)—the standard Linear Congruential Generator (LCG), a modification of the LCG with additional randomization used in the BOSS software, and the “Mersenne Twister” generator by Matsumoto and Nishimura. While using the latter two RNG's leads to reasonably similar physical features, the LCG produces significant different results. For the pure fluids, a noticeable expansion occurs. Using the original LCG on butane yields, a molecular volume of 171.4 ų per molecule compared to about 163.6–163.9 ų for the other two generators, a deviation of about 5%. For methanol, the LCG produces an average volume of 86.3 ų per molecule, which is about 24% higher than the 68.8–70.2 ų obtained with the RNG's in BOSS and the generator by Matsumoto and Nishimura. In case of the hydrated tridecaalanine peptide, the volume and energy tend to be noticeably greater with the LCG than with the BOSS (modified LCG) RNG's. For the simulated hydrated extended conformation of tridecaalanine, the difference in volume reached about 87%. The uniformity and periodicity of the generators do not seem to play the crucial role in these phenomena. We conclude that, it is important to test a RNG's by modeling a system such as the pure liquid methanol with a well‐established force field before routinely employing it in Monte Carlo simulations. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2011