BC/CoNi2S4@PPy柔性复合电极材料的制备及电化学性能

本文采用溶剂热、原位聚合和真空抽滤相结合的方法制备了用于超级电容器的细菌纤维素/镍钴硫化物/聚吡咯(BC/CoNi2S4@PPy)柔性电极材料,通过X 射线衍射、场发射扫描电镜、红外光谱、氮气吸脱附、拉伸强度和接触角表征了材料的形貌结构、组成、机械性能和亲水性,并采用循环伏安法和恒电流充放电测试了复合材料的电化学性能....     

用刚体理论分析烟囱倒下的断点位置

烟囱倾倒的过程中将会在某处发生断裂.通过刚体理论知识,采用圆台模型分析了烟囱倾倒过程中的动力学过程,通过理论推导找到极值点,理论上推断出烟囱断裂的位置.     

二氧化钚分子的多体展式势能函数

从导出基态PuO2分子的电子状态X5Σ g正确地判断其离解极限出发,采用MP2方法,应用相对论有效原子实模型(RECP)优化出PuO2(X5Σ g)分子稳定构型为线性OPuO(D∞h),其平衡核间距Re=0.18004nm.同时也计算出振动频率,并优化出存在亚稳态的Pu-O-O(C∞v)构型.使用多体项展式理论方法,导出了基态PuO2分子的分析势能函数.该势能表面准确地再现了O-Pu-O(D∞h)平衡结构和亚稳态的Pu-O-O(C∞v)构型.然后根据势能函数等值图讨论了O(3Pg) PuO反应的势能面静态特征.     

用于超级电容器的层状Co3O4/Ti纳米片柔性电极及其低电荷转移电阻

采用水热合成法,在Ti网上原位生长多孔层状Co_3O_4纳米片,并优化了电荷转移电阻。通过X射线衍射(XRD)、扫描电子显微镜(SEM)和透射电子显微镜(TEM)对产物的结构、形貌进行表征,及对电极的电化学性能进行测试。结果表明,材料是由排列良好的微米矩形二维薄片组成,且具有均匀的孔隙分布。这种独特的微纳米结构的超级电容器电极材料降低了电极的电荷转移电阻,增强了活性物质的结构稳定性,从而提高了电极的电化学性能,在电流密度为100 mA·g-1时,电极循环1 000次后,电容保持率为91.8%,电荷转移电阻(Rct)为0.29Ω。这些显著的超电容性能归因于合理的二维层状结构在柔性基底钛网上的生长及柔性Co_3O_4/Ti电极活性材料的高利用率。     

Three new ZnII coordination polymers constructed from a semi‐rigid tricarboxylic acid: structural changes caused by flexibility and luminescence sensing for hexavalent chromate anions

Coordination polymers (CPs) with specific structures and functional luminescence have been widely designed as sensors for detecting small molecules and ions. In this study, with or without the help of an N‐donor auxiliary linker, three new Zn^II CPs, namely, three‐dimensional (3D) poly[[pentaaquabis[μ₃‐5‐(4‐carboxybenzyloxy)isophthalato]bis[μ₆‐5‐(4‐carboxylatobenzyloxy)isophthalato]di‐μ₃‐hydroxido‐hexazinc(II)] trihydrate], {[Zn₆(C₁₆H₁₀O₇)₂(C₁₆H₉O₇)₂(OH)₂(H₂O)₅]·3H₂O}_n or {[Zn₆(μ₃‐HL)₂(μ₆‐L)₂(μ₃‐OH)₂(H₂O)₅]·3H₂O}_n, ( I ), one‐dimensional (1D) catena‐poly[[[aqua(1,10‐phenanthroline)zinc(II)]‐μ₂‐5‐(4‐carboxybenzyloxy)isophthalato] dihydrate], {[Zn(C₁₆H₁₀O₇)(C₁₂H₈N₂)(H₂O)]·2H₂O}_n or {[Zn(μ₂‐HL)(phen)(H₂O)]·2H₂O}_n (phen is 1,10‐phenanthroline), ( II ), and 3D poly[diaquatetrakis(4,4′‐bipyridine)bis[μ₆‐5‐(4‐carboxylatobenzyloxy)isophthalato]di‐μ₃‐formato‐di‐μ₃‐hydroxido‐pentazinc(II)], [Zn₅(C₁₆H₉O₇)₂(HCOO)₂(OH)₂(C₁₀H₈N₂)₄(H₂O)₂]_n or [Zn₅(μ₄‐L)₂(bpy)₄(μ₂‐OH)₂(μ₃‐HCOO)₂(H₂O)₂]_n (bpy is 4,4′‐bipyridine), ( III ), have been constructed from the semi‐rigid tricarboxylic acid 5‐(4‐carboxybenzyloxy)isophthalic acid (H₃L) under hydrothermal conditions. CP ( I ) exhibits a twofold interpenetrated 3D+3D→3D skeleton with a 3 , 5 ‐conn topology constructed from triangular trinuclear [Zn₃(COO)₄(μ₃‐OH)] clusters, in which the H₃L ligand adopts three different coordination modes. CP ( II ) exhibits a 1D infinite chain and stacking that gives a 3D structure mediated by hydrogen bonds and weak interactions. CP ( III ) is an interesting 3D 3 , 4 , 8 ‐conn network including linear tetranuclear [Zn₄(μ₂‐OH)₂(HCOO)₂(COO)₂] clusters with a new {4·6²}₂{4·6⁴·8}{4⁶·6¹⁹·8³} topological symbol. The influences of the flexible –CH₂–O– linker of the H₃L ligand and subtle environmental factors, such as solvent, pH value and auxiliary ligands, on the formation of the final structures are also discussed. The solid‐state fluorescence spectra of CPs ( I )–( III ) were recorded at room temperature and all show better fluorescence performances than H₃L. In particular, ( II ) can act as a potential multifunctional fluorescent material for sensing hexavalent chromium ions in aqueous solution with high stability, selectivity and sensitivity. Under ultraviolet light of 365 nm from a UV lamp, a signal response of fluorescence from turning on to off can be observed with the naked eye. It was found that the detection for hexavalent chromium (i.e. Cr₂O₇^2?) by ( II ) has a high selectivity [K_SV = 1.61 × 10⁴M^?1 and limit of detection (LOD) = 0.434 µM] in aqueous solution. Quenching mechanisms were also studied in detail.     

Hybrid Fibers Made of Molybdenum Disulfide,Reduced Graphene Oxide,and Multi‐Walled Carbon Nanotubes for Solid‐State,Flexible, Asymmetric Supercapacitors

One of challenges existing in fiber‐based supercapacitors is how to achieve high energy density without compromising their rate stability. Owing to their unique physical, electronic, and electrochemical properties, two‐dimensional (2D) nanomaterials, e.g., molybdenum disulfide (MoS₂) and graphene, have attracted increasing research interest and been utilized as electrode materials in energy‐related applications. Herein, by incorporating MoS₂ and reduced graphene oxide (rGO) nanosheets into a well‐aligned multi‐walled carbon nanotube (MWCNT) sheet followed by twisting, MoS₂‐rGO/MWCNT and rGO/MWCNT fibers are fabricated, which can be used as the anode and cathode, respectively, for solid‐state, flexible, asymmetric supercapacitors. This fiber‐based asymmetric supercapacitor can operate in a wide potential window of 1.4 V with high Coulombic efficiency, good rate and cycling stability, and improved energy density.     

两个三维柔性功能化双苯并咪唑金属N-杂环卡宾的合成和结构

由1,1'-双苄基-3,3'-氧双(亚乙基-2,1)-二苯并咪唑六氟磷酸盐(L1)和1,1'-双(吡啶-2-甲基)-3,3'-氧双(亚乙基-2,1)-二苯并咪唑六氟磷酸盐(L2)为配体合成了[Hg(C₃₂H₂₈N₄O)](CH₃COO)(PF₆)₂(1)和[NiCl(C₃₀H₂₈N₆O)](PF₆)₂(2),并对其进行了结构表征。配合物1是一个罕见的三价态Hg配合物,为单斜晶系P2₁/c空间群,配合物2为单斜晶系P2₁/n的配合物。1和2中存在O-H…F,C-H…F,C-H…Cl,C-H…π,P-F…π氢键作用和π-π堆积作用,并以此分别形成了3D超分子结构。     

丝网印刷柔性电子器件

有机电子器件的主要优势之一是溶液可处理性,这使得可以通过多种印刷方法制备有机电子器件。丝网印刷作为一种十分成熟的印刷方法,被广泛应用于微电子器件的制备。本文主要从丝网印刷的组成、影响丝网印刷精密度的因素以及丝网印刷在场效应晶体管、太阳能电池、有机发光二极管等柔性电子器件制备中的应用分别作以介绍,并对目前丝网印刷在印刷柔性电子器件中存在的困难和挑战作以总结。     

基于4-二苯基乙酸及1,3-二(4-吡啶基)丙烷的两个银配合物的结构和荧光

以同物质的量比例的4-二苯基乙酸(Hbpa)、1,3-二(4-吡啶基)丙烷(bpp)和[Ag(NH₃)](OH),在不同反应条件下制备了2个基于柔性配体的类三明治配合物[Ag₂(bpa)₂(bpp)₂]·2H₂O_n(1)和[Ag(bpa)(bpp)]·2H₂O_n(2),对其进行了单晶结构、元素分析、红外光谱、荧光光谱和粉末衍射表征。结构表明1是由T型配位的银离子和Ag…Ag超分子作用组装而成的二维配合物;配合物2则是由四面体构型银离子和π…π堆积作用组装的二维配位超分子。此外,1和2还可在可见光区的不同位置发射较强荧光。     

基于一种柔性二羧酸和不同双咪唑配体构筑的两例钴-穿插网格

利用一种柔性二羧酸,辅以不同的双咪唑配体在水热条件下构筑了两例具有穿插特征的钴配位聚合物,{[Co(bimb)(L)]·H₂O}_n(1)和{[Co(bbix)(L)]₂}_n(2)(H₂L=4,4'-(2,2'-oxybis(ethane-2,1-diyl)bis(oxy))dibenzoic acid, bimb=1,1'-(1,4-butanediyl)bis(imidazole), bbix=1,4-bis(benzimidazole-1-ylmethyl)-benzene)。单晶X-射线衍射研究发现配合物1为2D→3D 4-连sql拓扑构型的三重穿插网格;配合物2为3D 4-连6⁶ dia拓扑构型的六重穿插网格。该结构分析结果表明作为辅助配体的双咪唑配体的构型对配合物的穿插特征有重要影响。另外,我们还研究了配合物1和2的热稳定性及磁性。