“蜡烛火焰划分”实验的局限成因分析及改进研究

人教版初中化学首个探究性实验"蜡烛及其燃烧"明确指出火焰的划分方法，但在实际教学中肉眼观察法和火柴梗燃烧法对蜡烛火焰的划分存在一定的局限性。采用文献研究法和实验验证法分析其局限性的成因——燃料的析炭能力强弱、材料结构的不同等，并提出相应的改进建议。     

CH4/空气简化动力学机理数值验证

选择绕圆柱预混燃烧算例，验证CH₄/空气三种简化动力学机理（16s41r、15s19r和53s325r）.考虑均匀来流，忽略湍流和湍流与燃烧相互作用以及燃料扩散效应，假设层流有限反应速率，采用保自由流5阶WENO格式求解多组分Euler方程组，得到CH₄/空气预混燃烧流场温度等值线、沿驻点线压力和温度及其CH₄、CO和CO₂质量百分数分布.结果表明：三种简化动力学机理给出的流场均出现弓形激波和火焰面，弓形激波和火焰驻点距离及其形状、诱导区宽度和简化动力学机理相关.当圆柱直径增大，弓形激波和火焰向圆柱上游移动，对应的驻点距离均增大，诱导区宽度变短，点火延时变小，但火焰和弓形激波位置次序未变化.53s325r模型要比16s41r模型和15s19r模型精度要高，点火延时覆盖的压力和温度范围也较宽，所有简化机理均未完全反应，在较大圆柱直径下游达到化学平衡.     

Catalytic activity of Pt and Pd in gaseous reactions of H2 and CH4 oxidation at low pressures

1. Download : Download high-res image (85KB)
2. Download : Download full-size image

     

An analysis of peak overpressures in vented gaseous explosions

Experimental data from vented explosion tests using stoichiometric methane–air and 18% hydrogen–air mixtures in a 63.7 m³ chamber with a 2.7 or 5.4 m² vent are presented. Results from experiments conducted using stoichiometric propane–air in 2.42 m³ vessel with a 0.26 m² vent are also reported. The tests were focused on the effect of fuel, enclosure size, ignition location, vent size, and obstacles on the pressure development of a propagating flame in a vented enclosure. The dependence of the maximum pressure generated on the experimental parameters was analyzed. It was found that the pressure maxima may be caused by pressure transients controlled by the interplay of the maximum-flame area, the burning velocity, and the overpressure generated by an external explosion. A simple model was proposed to estimate the maximum pressure for each of the main pressure transients. The model was found to agree with the experimental data within the experimental uncertainty.     

Combining GPS carrier phase and Doppler observations for precise velocity determination

The truncation error and propagation error are analyzed for velocity determination through differential GPS carrier phase observations,and an approach for the choice of the best number of points for the central difference method is developed.In order to overcome the disadvantages of existing GPS velocity determination methods,a new velocity determination algorithm is presented,based on combining carrier phase and Doppler observations.The basic idea is that two types of observation are combined by adding the...     

Operation principle of self-phase compensated optical waveguide isolator

A theory is developed for the self-phase compensated optical waveguide isolator recently reported in the literature. The operation principle of such device is explained in terms of synchronization of phase and power conversion. The effect of balancing phase mismatches of the two convertors on achieving a proper percentage of mode conversion is revealed. The way to make use of the phase mismatches of different sections to accommodate the different requirements in phase relationship for the reciprocal and nonreciprocal mode convertors is discussed. The theory is extended to the case where phase compensator is used. It is demonstrated that the introduction of phase compensator separates the adjustment of phase from the adjustment of power for the mode convertors so that relaxes fabrication tolerances of such devices. An isolator consists of three phase mismatched waveguide sections is designed and simulated. The simulation results confirm the self-phase compensation theory.     

Effect of a Nanoclay on the Mechanical,Thermal and Flame Retardant Properties of Rigid Polyurethane Foam

Water blown rigid polyurethane foams (PUF) with organoclay/organically modified nanoclay (ONC) were prepared and their properties such as density, mechanical, morphological, insulation, thermal and flame retardant properties were studied. In this investigation, the ONC content was varied from 1 to 10 parts per hundred of polyol (php) by weight. It was observed that the compressive strength of ONC filled PUF increased up to 3 php of ONC loading and then it decreased. Wide angle X-ray diffraction and transmission electron microscopy studies indicated the exfoliated dispersion of ONC in PUF. The thermal conductivity of ONC filled PUF decreases up to 5 php and then increases. The glass transition temperature (Tg) of PUF decreases on loading of ONC. The TGA analysis shows that there is slight increase in degradation temperature with increase in ONC loading. The flame retardant properties (LOI and flame spread rate) are improved slightly on addition (3 php) of ONC filled PUF.     

Functions of Acyclic Poly(ethylene Oxide) Homologs: Acceleration of Nucleophilic Reactions and Selective Ion Transport through Membranes

The acceleration effect of poly(ethylene oxide) on nucleophilic reactions was investigated. The enhancement of the reaction rate was interpreted by the cooperative solvation of alkali metal ions with ethereal oxygens of PEO resulting in active nucleophilic anions. In relation to the complex formation of alkali metal ions with PEO, the oligo(ethylene oxide) derivatives were prepared as the synthetic ionophores, which were able to transport alkali metal ions selectively through a liquid membrane against the alkali metal ion concentration.