Propagation characteristics of tilted partially coherent rectangular flat-topped beam in turbulent atmosphere

In this paper, the effects of atmospheric turbulence on the intensity distribution of a tilted Rectangular Partially Coherent Flat-Topped (RPCFT) beam were studied. An analytical formula for the intensity distribution was derived. POWER In Bucket (PIB) value is calculated numerically. The effects of source parameters – such as correlation length, order of flatness and tilt coefficient – on the intensity were analyzed. Detailed analysis demonstrates that these parameters have an influence on beam propagation properties. The analyses are illustrated by numerical examples and graphs.     

3-D simulation of soot formation in a direct-injection diesel engine based on a comprehensive chemical mechanism and method of moments

Here, we propose both a comprehensive chemical mechanism and a reduced mechanism for a three-dimensional combustion simulation, describing the formation of polycyclic aromatic hydrocarbons (PAHs), in a direct-injection diesel engine. A soot model based on the reduced mechanism and a method of moments is also presented. The turbulent diffusion flame and PAH formation in the diesel engine were modelled using the reduced mechanism based on the detailed mechanism using a fixed wall temperature as a boundary condition. The spatial distribution of PAH concentrations and the characteristic parameters for soot formation in the engine cylinder were obtained by coupling a detailed chemical kinetic model with the three-dimensional computational fluid dynamic (CFD) model. Comparison of the simulated results with limited experimental data shows that the chemical mechanisms and soot model are realistic and correctly describe the basic physics of diesel combustion but require further development to improve their accuracy.     

Parametric study on a compound-drop spray flame

The introduction of compound-drop spray in a combustion system is a new concept. These droplets bear two gasification stages to cause an integral positive or negative effect on a premixed flame to raise or lower the local temperature of the gasification region. In this paper, we adopt a compound drop which contains a water core encased by a layer of shell fuel. A one-dimensional homogeneous lean or rich premixed flame with the dilute compound-drop spray was investigated by using large activation energy asymptotic analysis. The compound-drop spray burning mode was defined and divided into completely pre-vaporised burning (CPB), shell pre-vaporised burning (SPB) and shell partially pre-vaporised (SPP) burning modes by way of the gasification zones of the shell fuel and the core water relative to the flame position. The influences of the initial droplet radius, the shell-fuel mass fraction and the liquid loading of the compound-drop spray on the lean and rich flames were analysed. By means of the normalisation parameter of flame propagation mass flux (), enhancement, suppression or extinction of the compound-drop spray flame can be represented clearly. Furthermore, from the observation of extinction, the necessary conditions of extinction of a lean spray flame by the internal heat transfer are that the spray is a negative effect and causes a sufficient heat loss rate at flame sheet downstream side. For a rich spray flame, three extinction patterns were observed; they occur in SPP, SPB or at the critical SPB mode, but do not in CPB. The extinction maps of the compound-drop spray demarcate the patterns and also indicate the limitations and corresponding conditions of the flame extinction.     

A numerical study on extinction behaviour of laminar micro-diffusion flames

We conducted a numerical study on the fluid dynamic, thermal and chemical structures of laminar methane–air micro flames established under quiescent atmospheric conditions. The micro flame is defined as a flame on the order of one millimetre or less established at the exit of a vertically-aligned straight tube. The numerical model consists of convective–diffusive heat and mass transport with a one-step, irreversible, exothermic reaction with selected kinetics constants validated for near-extinction analyses. Calculations conducted under the burner rim temperature 300 K and the adiabatic burner wall showed that there is the minimum burner diameter for the micro flame to exist. The Damköhler number (the ratio of the diffusive transport time to the chemical time) was used to explain why a flame with a height of less than a few hundred microns is not able to exist under the adiabatic burner wall condition. We also conducted scaling analysis to explain the difference in extinction characteristics caused by different burner wall conditions. This study also discussed the difference in governing mechanisms between micro flames and microgravity flames, both of which exhibit similar spherical flame shape.     

The extension of the ILDM concept to reaction–diffusion manifolds

In the present work, the method of simplifying chemical kinetics based on Intrinsic Low-Dimensional Manifolds (ILDMs) is modified to deal with the coupling of reaction and diffusion processes. Several problems of the ILDM method are overcome by a relaxation to an invariant system manifold (Reaction–Diffusion Manifold – REDIM). This relaxation process is governed by a multidimensional parabolic partial differential equation system, where, as an initial solution, an extended ILDM is used. Furthermore, a method for the solution and tabulation of the manifold is proposed in terms of generalized coordinates, with a subsequent procedure for the integration of the reduced system on the found manifold. This modification of the ILDM significantly improves the performance of the concept and allows us to extend its area of applicability. Illustrative comparative calculations of detailed and reduced models of flat laminar flames verify the approach.     

Multi-environment probability density function method for modelling turbulent combustion using realistic chemical kinetics

A computational fluid dynamics (CFD) tool for performing turbulent combustion simulations that require finite-rate chemistry is developed and tested by modelling a series of bluff-body stabilized flames that exhibit different levels of finite-rate chemistry effects ranging from near equilibrium to near global extinction. The new modelling tool is based on the multi-environment probability density function (MEPDF) methodology and combines the following: the direct quadrature method of moments (DQMOM); the interaction-by-exchange-with-the-mean (IEM) mixing model; and realistic combustion chemistry. Using DQMOM, the MEPDF model can be derived from the transport PDF equation by depicting the joint composition PDF as a weighted summation of a finite number of multi-dimensional Dirac delta functions in the composition space. The MEPDF method with multiple reactive scalars retains the unique property of the joint PDF method of treating chemical reactions exactly. However, unlike the joint PDF methods that typically must resort to particle-based Monte-Carlo solution schemes, the MEPDF equations (i.e. the transport equations of the weighted delta-peaks) can be solved by traditional Eulerian grid-based techniques. In the current study, a pseudo time-splitting scheme is adopted to solve the MEPDF equations; the reaction source terms are computed with a highly efficient and accurate in-situ adaptive tabulation (ISAT) algorithm. A 19-species reduced mechanism based on quasi-steady state assumptions is used in the simulations of the bluff-body flames. The modelling results are compared with the experimental data, including mixing, temperature, major species and important minor species such as CO and NO. Compared with simulations using a Monte-Carlo joint PDF method, the new approach shows comparable accuracy.     

Analytical predictions of shapes of laminar diffusion flames in microgravity and earth gravity

Flame shape is an important observed characteristic of flames that can be used to scale flame properties such as heat release rates and radiation. Flame shape is affected by fuel type, oxygen levels in the oxidiser, inverse burning and gravity. The objective of this study is to understand the effect of high oxygen concentrations, inverse burning, and gravity on the predictions of flame shapes. Flame shapes are obtained from recent analytical models and compared with experimental data for a number of inverse and normal ethane flame configurations with varying oxygen concentrations in the oxidiser and under earth gravity and microgravity conditions. The Roper flame shape model was extended to predict the complete flame shapes of laminar gas jet normal and inverse diffusion flames on round burners. The Spalding model was extended to inverse diffusion flames. The results show that the extended Roper model results in reasonable predictions for all microgravity and earth gravity flames except for enhanced oxygen normal diffusion flames under earth gravity conditions. The results also show trends towards cooler flames in microgravity that are in line with past experimental observations. Some key characteristics of the predicted flame shapes and parameters needed to describe the flame shape using the extended Roper model are discussed.     

Electroelastic behaviour of an annular interfacial crack between dissimilar piezoelectric layers

An annular interfacial crack between dissimilar piezoelectric layers subjected to electroelastic loadings was investigated under an electrically impermeable boundary condition on the crack surface by using the Hankel transform technique and the Cauchy singular integral equation method. The stress intensity factors and energy release rates were determined. Numerical results reveal the effects of crack configuration, electric loads and material parameters on crack propagation and growth. The results should be useful for the design of piezoelectric composite structures and devices of high performance.