空间杆系与叠层板组合结构的非线性稳定分析

本文用非线性有限元法研究一种空间杆系与复合材料叠层板组合结构的非线性稳定问题。将杆系离散成空间梁柱单元，将复合材料叠层板离散成复合材料叠层板单元，并考虑了几何非线性和板的成层正交各向异性性质。为了获得较高的计算效率并顺利通过稳定临界点，求解非线性平衡方程采用了变增量步长和柱面弧长法迭代策略。在考证了程序的正确性之后，具体分析了几个工程模型，得出了于工程设计有益的结论。     

涉及肌肉作用影响的髓内钉屈曲分析

在骨折的修复过程中，常发生髓内钉断骨内的情况。其主要原因是涉及肌肉影响后，髓内钉不是单钝的受压杆件，而是多种组合变形的屈曲问题。文中利用有限元法对目前较新结构的髓内钉在骨折治疗中涉及肌肉作用影响进行多方面的压、弯曲与扭转组合变形屈曲分析。得出了三叶瓣型髓内钉在涉及肌肉影响时的屈曲临界压力比单纯受压时髓内钉的屈曲临界压力小51％。并得出髓内钉只能额外承受15Nm左右的外来扭力。这些结果可供髓内钉进一步发展及临床应用参考。通过有限元的分析还可以对髓内钉受力状态的薄弱环节有一个全面的认识，为髓内钉合理设计、材料的选择等进行优化设计提供依据。     

自然弯扭梁的非线性分析

研究了两端边界均为完全约束的自然弯扭梁在小应变，大位移和大转动情况下的非线性性质，并考虑了横向剪切变形和扭转翘曲变形的影响，分析中还包括了拉伸，弯曲和扭转的各种弹性耦合。由最小势能原理可以导出所给问题的平衡方程。这里欧拉角可以用来表示任意大的转动。该方法还可方便地推广到其他各种不完全约束边界的情况。此外，利用上述结果还可以得到该梁在小位移理论中的基本方程和有关公式。     

Translational diffusion of rubrene and tetracene in polyisobutylene

The translational diffusion coefficients of rubrene and tetracene in amorphous polyisobutylene (PIB) were measured using the holographic fluorescence recovery after photobleaching technique. Over the temperature range from 400 to 235 K (T _g =205 K), tracer diffusion coefficients from 10^–7 to 10^–14 cm²/s were observed. These diffusion coefficients have essentially the same temperature dependence as the rotational correlation times for these two probes in PIB. Both of these observables have a slightly stronger temperature dependence than does the viscosity. These results contrast strongly with the results of similar experiments on polystyrene and polysulfone. These results are consistent with the hypothesis that local segmental dynamics are more spatially homogeneous in PIB than in polystyrene and polysulfone.Dedicated to Prof. John D. Ferry on the occasion of his 85th birthday.     

各向异性损伤力学在螺纹疲劳寿命预估中的应用

引用损伤力学方法研究金属构件疲劳问题。在微结构力学模型基础上建立轴对称的各向异性疲劳损伤本构关系,通过有限元-附加力解法编制考虑各向异性损伤的有限元程序。应用引入门槛条件的损伤演化方程,并以损伤划分步长预估了构件疲劳裂纹形成与扩展寿命。用这一方法预估30CrMnSiNi2Aφ5和φ8螺栓全寿命。结果表明,理论S-N曲线与试验S-N曲线吻合良好并且门槛条件对修正低应力下疲劳寿命有很好的效果。本方法所需机时较少,可用于工程实际构件的高周疲劳寿命预估及抗疲劳优化设计。     

各向异性复合材料尖劈和接头的奇性应力指数研究

提出了一个新的、基于位移的、求解三维尖劈端部奇性应力指数问题的非协调元特征分析法。该方法假定尖劈端部邻域内的位移场没有采用奇异变换技术，导出虚功方程的出发点不同于过去原有求解裂纹尖端近似场的有限元特征分析法，在有限元离散时采用的单元形式为非协调元。文中运用该方法给出了若干求解各向异性复合材料尖劈／接头端部奇性应力指数的算例。所有的计算结果表明，本文方法能够求解复杂尖劈／接头的全部奇性应力指数，使用的单元少而且精度高。     

Flux calculation at the interface between two rock types for two-phase flow in porous media

When simulating two-phase flow in porous media, one has to consider the case where there is a discontinuity in the medium. There relative permeabilities and capillary pressure functions may change and we address the problem of calculating the convective part of the numerical flux at the interface between the two rock types. Several solutions are compared.     

平面杆系结构非线性稳定的样条有限元分析法

本文根据ＵＴＬ坐标列式，采用混合样条插值函数，基于虚功原理导出了平面杆系结构非线性稳定的样条有限元分析法。本文方法可以考虑杆件中初始挠度和初始应力的影响，可以计入材料的弹塑性加载卸载效应。算例表明，本文计算结果具有较高的精度。     

FINITE LAYER ANALYSIS FOR SEMI-INFINITE SOILS (Ⅰ)——GENERAL THEORY

In the present paper a finite layer method is studied for the elastodynamics of transverse isotropic bodies. With this method, semi-infinite soils can be considered as an transverse isotropic half-space, its material functions varying with depth. Dividing the half-space into a series of layers in the direction of depth, the material functions in each layer are simulated by exponential functions. Consequently, the fundamental equations to be solved can be simplified if the Fourier transform with repsect to coordinates is used. We have obtained the relationship between the “layer forces” and “layer displacements”. This finite layer method, in fact, can also be called a semi-analytical method. It possesses those advantages as the usual semi-analytical methods do, and can be used to analyse the problem of the interaction between soils and structures. This paper is based on a portion of the author's dissertation submitted in partial fulfillment of the requirements of degree of Ph. D. at the Shanghai Institute of Appl. Math. & Mech., Shanghai.     

滚子摩擦副弹流润滑特性及其应用──Ⅰ 有限长直母线滚子的弹流数值解

运用改进的数值方法求得了与实验结果相符的等温有限长直母线滚子的弹流数值解，与无限长线接触弹流结果相比较，揭示了润滑状态下滚子摩擦副的边缘效应和端泄对油膜分布的影响，在低速和重载时滚子的两端都几乎不能形成全膜润滑，因而有必要通过修形消除滚子端部的边缘效应．