压电材料中切口/接头端部平面电弹性场奇异性有限元分析

为了对平面载荷作用下压电材料中切口或接头端部附近电弹性场奇异性问题进行分析，首先以应力平衡方程、Maxwell方程和和边界条件为基础，得到一种求解压电材料特征问题的弱式方程；其次，假定楔形切口或接头端部附近单元内位移和电势沿径向分布为指数形式，而周向方向分布则采用泡函数插值，将其代入弱式方程，建立一种只需对楔形切口或接头端部附近周边进行离散的一维简单有限元方法．压电材料的极化轴可以是任意方向．利用该有限元模型讨论了楔形切口角度、极化轴方向和边界条件对奇性场的影响．通过和其它特定情况下的现有解相比，证实了该文有限元数值方法的有效性，而且精度很高．     

非均匀Reissner板弯曲的精确元法

本文在阶梯折算法和精确解析法的基础上,提出构造有限元的新方法——精确元法.该方法不用变分原理,可适用于任意变系数正定和非正定偏微分方程.利用该方法,得到Reissuer板弯曲的一个非协调单元,它具有十五个自由度.由于节点位移参数仅含有挠度和转角,因此处理任意边界条件非常容易.文中给出证明,位移和内力均收敛于精确解.由精确元法所得到的单元不仅能用于厚板,也可用于薄板.文末给出四个算例.算例表明,利用本文的方法,可获得满意的结果,并有较高的数值精度.     

分子结构振动固有频率与链烷烃热力学性质的定量关系

用分子结构固有频率和分子中的甲基数作为分子结构信息指数,建立链烷烃分子结构与热力学性质的双参数QSPR模型.该模型用于18种链烷烃分子的标准生成焓、标准熵和标准生成自由能实验值的回归分析,得到相关程度大于0.999的标准生成焓、标准熵回归方程和相关程度大于0.99的标准生成自由能回归方程.所得方程用于67种链烷烃的标准生成焓、标准熵和标准生成自由能预测,结果与实验值的相关程度均大于0.9950.     

A two‐grid stabilization method for solving the steady‐state Navier‐Stokes equations

We formulate a subgrid eddy viscosity method for solving the steady‐state incompressible flow problem. The eddy viscosity does not act on the large flow structures. Optimal error estimates are obtained for velocity and pressure. The numerical illustrations agree completely with the theoretical results. © 2005 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2005     

Optimal convergence analysis of mixed finite element methods for fourth‐order elliptic and parabolic problems

By using a special interpolation operator developed by Girault and Raviart (finite element methods for Navier‐Stokes Equations, Springer‐Verlag, Berlin, 1986), we prove that optimal error bounds can be obtained for a fourth‐order elliptic problem and a fourth‐order parabolic problem solved by mixed finite element methods on quasi‐uniform rectangular meshes. Optimal convergence is proved for all continuous tensor product elements of order k ≥ 1. A numerical example is provided for solving the fourth‐order elliptic problem using the bilinear element. © 2005 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2006     

Reinvestigation of the ground and first torsional state of methylformate

We have reinvestigated the laboratory spectrum for the methylformate HCOOCH₃ molecule involving both the ground and first excited torsional states.We have fitted within almost experimental accuracy a data set for this molecule consisting of 3496 v_t=0 and 774 v_t=1 microwave lines, using the so-called “rho axis method” (RAM) and a model extended to include perturbation terms through eighth order. The previously published microwave lines covering the J values up to 43 in the ground state and up to 18 in the first excited state have been extended by 434 new measurements from Lille in the 567–669 GHz spectral range, corresponding to transitions with J_max=62, K_max=22 in v_t=0. The final fit requires only 49 parameters to achieve a unitless weighted standard deviation of 1.43 for a total of 4270 lines for the whole fit. This result represents an improvement over the previous fit which achieved a standard deviation of 1.96 for 3862 lines using 69 parameters. A calculation of the line strengths of torsion–rotation transitions up to J = 60 needed for the astronomical survey is also provided.     

半线性抛物最优控制问题全离散插值系数有限元方法的收敛性分析

本文考虑全离散插值系数有限元方法求解半线性抛物最优控制问题,其中控制变量用分片常数函数逼近,状态变量和对偶状态变量用分片线性函数逼近.对于方程中的半线性项,先用插值系数技巧处理,再用牛顿迭代法求解.通过引入一些辅助变量和投影算子,并利用有限元空间的逼近性质,得到半线性抛物最优控制问题插值系数有限元方法的收敛性结果;数值算例结果验证了理论结果的正确性.     

A two-grid finite element method for the Allen-Cahn equation with the logarithmic potential

In this paper, we present a two-grid finite element method for the Allen-Cahn equation with the logarithmic potential. This method consists of two steps. In the first step, based on a fully implicit finite element method, the Allen-Cahn equation is solved on a coarse grid with mesh size H. In the second step, a linearized system whose nonlinear term is replaced by the value of the first step is solved on a fine grid with mesh size h. We give the energy stabilities of the traditional finite element method and the two-grid finite element method. The optimal convergence order of the two-grid finite element method in H¹ norm is achieved when the mesh sizes satisfy h = O(H²). Numerical examples are given to demonstrate the validity of the proposed scheme. The results show that the two-grid method can save the CPU time while keeping the same convergence rate.     

Finite Integral Transform Solutions for Free Vibrations of Rectangular Thin Plates With Mixed Boundary Constraints北大核心CSCD

Analytical solutions, with unique research value, can serve as benchmarks for empirical formulas and numerical methods, a tool for rapid parameter analysis and optimization, and a theoretical basis for experimental designs. Conventional analytical methods, e.g., the Lévy solution method, are only applicable to mechanical problems of plates and shells with opposite simply-supported edges, which, however, may fail to obtain analytical solutions for the issues with complex boundary constraints. In recent years, the finite integral transform method for plate and shell problems was developed to deal with non-Lévy-type plates and shells, but it is still infeasible to solve the mixed boundary constrains-induced complex boundary value problems of higher-order partial differential equations. Herein, for the first time, the finite integral transform method was combined with the sub-domain decomposition technique to solve the free vibrations of rectangular thin plates with mixed boundary constraints. The rectangular plate was first divided into 2 sub-domains according to the mixed boundary constraints, and the 2 sub-domains were solved analytically with the finite integral transform method. Finally, the continuity conditions were introduced to obtain the analytical solution of the original problem. Based on the side spot-welded cantilever plates commonly used in engineering, the free vibration problem of a rectangular thin plate with 1 edge subjected to clamped-simply supported constraints and the other 3 edges free, was analyzed. The obtained natural frequencies and mode shapes are in good agreement with those from the finite element method as well as the solutions in literature, thus verifying the accuracy of the proposed method. The solution procedure of the finite integral transform method can be implemented based on the governing equations without any assumption of the solution form. Therefore, this strict analytical method is widely applicable to complex boundary value problems of higher-order partial differential equations for such mechanical problems of plates and shells. © 2023 Editorial Office of Applied Mathematics and Mechanics. All rights reserved.     

Uniform Convergence of Multigrid V-Cycle on Adaptively Refined Finite Element Meshes for Elliptic Problems with Discontinuous Coefficients

The multigrid V-cycle methods for adaptive finite element discretizations of two-dimensional elliptic problems with discontinuous coefficients are considered. Under the conditions that the coefficient is quasi-monotone up to a constant and the meshes are locally refined by using the newest vertex bisection algorithm, some uniform convergence results are proved for the standard multigrid V-cycle algorithm with Gauss-Seidel relaxations performed only on new nodes and their immediate neighbours. The multigrid V-cycle algorithm uses $\mathcal{O}(N)$ operations per iteration and is optimal.