海刺猬状微纳结构钴镍化合物的合成与表征(英文)

采用均相沉淀法,以Co(NO_3)_2·6H_2O和Ni(NO_3)_2·6H_2O为原料,尿素作为沉淀剂,成功制备出了新型海刺猬状微/纳复合结构。通过调节反应温度,反应物浓度和物质的量的比,所获得的前驱体呈放射状纳米线构成的海刺猬结构。随后分别在氧气氛和氢气氛下对制备出的前驱体进行热处理,利用FE-SEM、TEM、XRD以及VSM等测试手段对制备出的微/纳复合结构前驱体及热处理产物进行了形貌表征、物相分析以及磁学性能表征。在氧气氛条件下处理得到的产物具有良好的亚铁磁性,并且很好地保持了前驱体的结构与形貌。结合热处理产物的分析,对该海刺猬微纳结构前驱体提出了一种可能的形成过程和机理。另外,在氢气还原条件下处理得到的产物为多孔微纳米球状结构,呈现出更为优异的亚铁磁性。     

Revisitation of the molecular mobility of the amorphous solid 4,4′-methylenebis(N,N-diglycidylaniline) (MBDA): New contributions from the TSDC technique

In the present work we revisit the previously published study by Thermally Stimulated Depolarisation Currents (TSDC) of the slow molecular mobility in the amorphous solid state of 4,4′-methylenebis(N,N-diglycidylaniline), MBDA (H. P. Diogo, J. J. Moura Ramos, J. Mol. Liq. 129(2006)138–146) in order to add two important points dealing with recent uses of the TSDC technique. One of them concerns a new method to account for nonexponentiality in Thermally Stimulated Depolarisation Currents (TSDC) data treatment which affects the analysis of the alpha relaxation peak and the determination of the fragility index of the glass-forming system. The other point concerns the analysis of the secondary relaxations in MBDA. It is shown that two kinds of secondary relaxations are differently influenced by aging. The faster components of the secondary relaxation are negligibly dependent on aging and may be ascribed to intramolecular modes of motion, while the slower motional modes show a significant dependence on aging and correspond to the genuine Johari-Goldstein β-relaxation.     

Atomic oxygen recombination on the ODS PM 1000 at high temperature under air plasma

High temperature materials are necessary for the design of primary heat shields for future reusable space vehicles re-entering atmospheric planet at hypersonic velocity. During the re-entry phase on earth, one of the most important phenomena occurring on the heat shield is the recombination of atomic oxygen and this phenomenon is more or less catalyzed by the material of the heat shield. PM 1000 is planned to be use on the EXPERT capsule to study in real conditions its catalycity. Before the flight, it is necessary to perform measurements on ground test facility. Experimental data of the recombination coefficient of atomic oxygen under air plasma flow were obtained in the diffusion reactor MESOX on pre-oxidized PM 1000, for two total pressures 300 and 1000 Pa in the temperature range (850-1650 K) using actinometry and optical emission spectroscopy. In this investigation, the evolution of the recombination coefficient is dependent of temperature, pressure level and also of the chemical composition of the surface leading to one order of magnitude for a given temperature. The recombination coefficient is increasing with temperature and also dependent on the static pressure. The surface change due to the plasma exposure is inspected with SEM, XRD and XPS. As chromium oxide is the main part of the oxide layer formed during the oxidation in air plasma conditions, a sintered Cr₂O₃ sample was elaborated from powders to compare the data of the recombination coefficient obtained on PM 1000. Pre- and post-test analyses on the several materials were carried out using SEM, WDS, XRD and XPS.     

Effect of thermal treatment on potato starch evidenced by EPR,XRD and molecular weight distribution

Effect of heating of the potato starch on damages of its structure was investigated by quantitative electron paramagnetic resonance (EPR) spectroscopy, X‐ray diffraction and determination of the molecular weight distribution. The measurements were performed in the temperature range commonly used for starch modifications optimizing properties important for industrial applications. Upon thermal treatment, because of breaking of the polymer chains, diminishing of the average molecular weights occurred, which significantly influences generation of radicals, evidenced by EPR. For the relatively mild conditions, with heating parameters not exceeding temperature 230 °C and time of heating equal to 30 min a moderate changes of both the number of thermally generated radicals and the mean molecular weight of the starch were observed. After more drastic thermal treatment (e.g. 2 h at 230 °C), a rapid increase in the radical amount occurred, which was accompanied by significant reduction of the starch molecular size and crystallinity. Experimentally established threshold values of heating parameters should not be exceeded in order to avoid excessive damages of the starch structure accompanied by the formation of the redundant amount of radicals. This requirement is important for industrial applications, because significant destruction of the starch matrix might annihilate the positive influence of the previously performed intentional starch modification. Copyright © 2015 John Wiley & Sons, Ltd.     

Production of phenol compounds by alkaline treatment of technical hydrolysis lignin and wood biomass

Aqueous alkaline depolymerization of technical hydrolysis lignin (THL) was carried out with a 5% NaOH solution at a temperature of 180°C for 6 hours, the ratio between the biomass and depolymerizing agent being 1:8. The poplar wood sawdust was treated under the same conditions for 2 hours, where anthraquinone was added as a catalyst (0.5 wt %). The poplar wood bark was treated for 4 hours, without anthraquinone. Compounds contained in the aqueous phase were extracted three times by means of toluene for a ratio between the organic and aqueous phases equal to 1:5, 1:5 and 1:5. The compounds 2-methoxyphenol, 2,6-dimethoxyphenol, 4-hydroxy-3-methoxybenzaldehyde, 1-(4-hydroxy-3-methoxyphenyl)ethanone, 4-hydroxy-3,5-dimethoxybenzaldehyde, etc., were identified through GC-MS analysis in obtained extracts. Published in Khimiya Prirodnykh Soedinenii, No. 2, pp. 144–146, March–April, 2008.     

Synthesis and characterization of a hyperbranched hydrogen bond acidic carbosilane sorbent polymer

Sorbent polymers can be designed to target molecular interactions with a variety of hazardous chemicals including explosives, chemical agents, narcotics, and toxic industrial chemicals. Applications of functionalized sorbent polymers include preconcentrator devices, SPME fibers, membrane introduction systems, chromatographic stationary phases and coatings for chemical sensors. One common feature of a wide range of hazardous chemicals is their hydrogen bond (h‐b) basicity. In this work, we report on the synthesis and characterization of a h‐b acidic hyperbranched carbosilane fluoroalcohol based sorbent polymer (poly(methyldi(1,1,1‐trifluoro‐2‐trifluoromethyl‐2‐hydroxypent‐4‐enyl)silane; HCSFA2), which is suitable for sorbing these hazardous h‐b basic analytes. Multiple batches of HCSFA2 were characterized with routine composition, spectroscopic, thermal analysis, and inverse gas chromatography (iGC) to evaluate polymer physicochemical properties. In comparison with previously developed h‐b acidic polymers (e.g., FPOL and SXFA), HCSFA2 exhibits a sorption improvement of 10–15 fold for h‐b basic analytes. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3000–3009, 2010     

一种快速凝固AB2型储氢合金的球磨改性

通过熔纺（melt-spinning）法制备了Zr0.9Ti0.1（Ni0.57V0.1Mn0.28C0.05）2.1合金，并与C03Mo混合球磨以改善其动力学性能结果发现，经过球磨，储红合金与作为催化剂的Co3Mo接触更加紧密，电化学容量和活化性能得到明显改善交流阻抗测试表明，球磨大大改善了合金的表面活性．但长时间的球磨可使合金进一步非晶化，导致容量及活性的下降．实验结果还表明，将快速凝固合金与具有电催化作用的Co3Mo球磨得到的电极材料，其活性要高于合金与只作为导体的铜粉进行球磨或在无添加剂条件下进行球磨得到的电极材料．     

Surface modification of quarry stone by hexamethyldisiloxane plasma treatment

The surface of quarry stone was modified by continuous plasma polymerization of hexamethyldisiloxane. The hydrophilic surface of the quarry stone was made hydrophobic and impermeable to water. Three different reaction times were analyzed. All of them resulted in the formation of a homogenous layer on the quarry stone surface. Contact angle and FT‐IR analyses show that the hydrophobic character of the surface is due to methyl groups on the surface. The change in the contact angle with temperature and the wetting temperature (T_w) are also discussed. Copyright © 2007 John Wiley & Sons, Ltd.     

Influence of the nanoparticle sizes on the photo-induced absorption of La–Ga–S–O–Dy glass nanocomposites

We have established that the illumination by two coherent beams originating from nanosecond Nd:YAG laser at wavelengths 1064 nm and 532 nm in the La–Ga–S–O–Gd:PVA La-Ga-S-O-Dy polymer glass nanocomposites leads to substantial changes in the absorption. The effect is completely reversible and disappears after interruption of the optical treatment. The illumination power density was varied up to 0.6 GW/cm². All the samples show destruction less than 0.2% changes after more than 300,000 laser pulses. The beams were incident with the angles varying between 45° and 50° with respect to the nanocomposite surface. Moreover, the additional analysis of TEM did not demonstrate any additional aggregations. The role of light polarizations, beam stability, and light scattering is discussed.