热处理及与KOH共炭化对深度脱除煤中无机矿物质的促进作用

研究了煤经热处理（炭化）以及煤与ＫＯＨ共炭化对酸洗脱灰的影响。结果表明，煤经炭化再用盐酸洗涤，可以在缓和的条件下大幅度提高酸洗脱灰率；煤与ＫＯＨ共炭化后再酸洗，不仅对煤中的粘土、黄铁矿等无机矿物质有很好的效果，还特别适于脱除在一般情况下都难以除去的石英矿物。     

Effect of ageing atmospheres on the changes in surface free energies of oxygen plasma-treated polyethylene films

The changes in the surface properties of oxygen plasma-treated polyethylene films during ageing in various atmospheres (water, dry nitrogen gas, and hexane) were studied from the viewpoint of the interaction of the surface functional groups formed on the films and the ageing media. The XPS (x-ray photoelectron spectroscopy) and the SSIMS (static secondary ion mass spectrometry) spectra indicated the formation of polar groups containing oxygen such as C=O on the film surface. The changes in the critical surface tension (_C) of the film with ageing time were largely affected by the ageing atmospheres: the _C value of the film aged in water increased, and those of the films aged in nitrogen gas and hexane decreased with an increase in ageing time. These different tendencies among the ageing media could be understood reasonably with examining the surface free energy ratios (the total energy, _S ^tot , the dispersion force component, _S ^d / _S ^tot , the polar component, _S ^p / _S ^tot , the hydrogen bonding component, _S ^h / _S ^tot ) of the films. The ageing in water of which _L is large gave the films with higher _S ^p / _S ^tot values, suggeting that the overturn and/or the orientation of the polar groups toward the water phase occurred so as to minimize the discrepancy of the surface free energy between the polymer surface and water. On the other hand, the ageing in nitrogen gas and hexane media of which _L are small gave the films with lower _S ^p / _S ^tot and _S ^h / _S ^tot values, suggesting the overturn and/or the orientation of the polar groups into the bulk polymer.     

微量元素硒在肿瘤防治中的作用及应用前景

硒作为人类必需的必需元素，人们对其重要性的认识日益提高，已经将将缺硒与增加癌症风险联系在一起。本文就硒在肿瘤防治中的可能作用及其应用进展，从流行病学调查、实验室和人群试验三个方面作一综述。尽管对其作用仍然存在不同观点的争论，但多数报道提示硒在抗癌领域有良好的应用前景。     

Note on the ab initio PUHF treatment of open-shell systems

Ab initio projected-unrestricted Hartree-Fock calculations have been carried out on a number of excited and ionic states of the water molecule. Results have been compared with large-scale CI calculations, with IVO calculations, and with those of Mrozek and Golebiewski obtained by the 2 × 2 rotation method applied to orbitals. It is concluded that the PUHF method may provide the most useful alternative to large-scale CI for calculating properties of open-shell systems. But it will not be generally useful for calculating spectral transition energies.     

水蒸气处理对P-ZSM-5催化性能的影响

在不同温度下,用水蒸气对P-ZSM-5催化剂进行了处理,利用XRD、NH3-TPD、比表面和孔径物理吸附仪等手段对催化剂进行了表征,研究了水蒸气处理对P-ZSM-5催化1-丁烯裂解反应性能的影响.实验结果表明:P-ZSM-5催化剂具有良好的水热稳定性;合适的水蒸气处理,有利于催化剂孔容和孔径的增加;水蒸气处理降低了P-ZSM-5催化剂的酸量和酸强度,明显提高了丁烯裂解生成丙烯的选择性、收率和催化剂的抗积炭性能.最佳的水蒸气处理温度为580℃,P-ZSM-5催化剂催化1-丁烯裂解反应的丙烯选择性为39.4%,收率为34.2%.     

The effect of electrochemically treated glassy carbon on the activity of supported Pt catalyst in methanol oxidation

Effect of electrochemical oxidation of glassy carbon on deposition of platinum particles and electrocatalytic activity of platinum supported on oxidized glassy carbon (Pt/GC_OX) were studied for methanol oxidation in H₂SO₄ solution. Platinum was potentiostatically deposited from H₂SO₄ + H₂PtCl₆ solution. Glassy carbon was anodically polarised in 0.5 M H₂SO₄ at 2.25 V vs. saturated calomel electrode (SCE) during 35 s. Electrochemical treatment of GC support, affecting not significantly the real Pt surface area, leads to a better distribution of platinum on the substrate and has remarkable effect on the activity. The activity of the Pt/GC_OX electrode for methanol oxidation is larger than polycrystalline Pt and for more than one order of magnitude larger than Pt/GC electrode. This increase in activity indicates the pronounced role of organic residues of GC support on the properties of Pt particles deposited on glassy carbon.     

Effect of polarization on the electrode behavior and microstructure of (La,Sr)MnO<Subscript>3</Subscript> electrodes of solid oxide fuel cells

The electrode behavior and microstructure of freshly prepared (La_0.8Sr_0.2)_0.9MnO₃ (LSM) electrodes were investigated under various polarization conditions. The original, large agglomerates in freshly prepared LSM electrodes were broken down into sphere-shaped grains when exposed to cathodic or anodic current passage of 200 mA cm^–2 at 800 °C in air for 3 h. Microstructural changes under cathodic polarization could be related to the pronounced diffusion and migration of oxygen vacancies and Mn ions on the LSM surface and lattice expansion, while lattice shrinkage under oxidation conditions most likely contributes to the structural changes under anodic polarization. Such morphological changes were irreversible and were found to be beneficial to the performance of freshly prepared LSM electrodes. Freshly prepared LSM electrodes behaved very differently with respect to the cathodic and anodic current passage treatment.     

X-ray, Raman and FTIRS studies of the microstructural evolution of zirconia particles caused by the thermal treatment

Genesis of the structure of zirconia particles prepared by precipitation of amorphous hydrated zirconia by ammonia from the ZrO(NO₃)₂ solution followed by a mild hydrothermal treatment (HTT) of precipitate, washing and calcination under air up to 1000 °C has been studied by X-ray diffraction (XRD), Raman and FTIRS. As revealed by FTIRS of lattice modes, the local structure of amorphous zirconia subjected to HTT is close to that in m-ZrO₂. This helps to obtain nearly single-phase monoclinic nanozirconia (particle size 5-15 nm) already after a mild calcination at 500 °C. Stability of this phase with nanoparticles sizes below the critical value determined by thermodynamic constraints is due to its excessive hydroxylation demonstrated by FTIRS. Dehydroxilation and sintering of these nanoparticles at higher (600-650 °C) temperatures of calcination leads to reappearance of the (111) “cubic” reflection in XRD patterns. Modeling of XRD patterns revealed that this phenomenon could be explained by polysynthetic (001) twinning earlier observed by HRTEM.     

Efficiency assessment of wastewater treatment plant based on SPMD sampling

The efficiency of treatment processes forboth municipal and industrial wastewater (treatment plant-Ostrava, Czech Republic) focused on persistent organic pollutants (POPs) was assessed. Semipermeable membrane devices (SPMDs) as a sampling system were applied. Exposed SPMDs were analyzed both for chemical contaminants of POPs and toxicity response. The chemical analyses of PAHs were made by HPLC-FLD, PCDD/Fs and PCBs were analysed by GC/MS/MS on GCQ or PolarisQ (Thermoquest). Ecotoxicity data on chlorococcal alga Desmodesmus subspicatus (Scenedesmus subspicatus) and luminescent bacteria Vibrio fischeri are presented here. All toxicity data as effective volume Vtox are expressed. The results show good treatment ability of the treatment plant and proved used system as an appropriate tool for efficiency assessment of treatment and/or decontamination processes.