重离子治疗计划系统的构想

对重离子柬治癌的优势进行简要的回顾，并着重介绍了用于重离子放射治疗的治疗计划系统。治疗计划系统是一套软件系统，不同的硬件设施应有与其相匹配的软件系统，即治疗计划系统。在此基础上，针对兰州重离子加速器的特点提出一些关于治疗计划系统方面的构想。After a brief review concerning the advantages of heavy ions in radiotherapy, more interests are concentrated on treatment planning system （TPS） for heavy ion radiotherapy. Compared to the hardware devices such as accelerator and beam delivery system, the TPS is a set of software system, and different therapy facilities require their corresponding TPSs. Based on the specialities of the Heavy Ion Research Facility in Lanzhou （HIIRFL）, some suggestions on the TPS for tumor therapy at HIRFL finally are given.     

Multifunctional ToF-SIMS: combinatorial mapping of gradient energy substrates

We present a simple method for chemical modification of chlorosilane self-assembled monolayers (SAMs) on Si surfaces by exposure to a gradient of UV-ozone radiation to create stable substrates with a range of contact angles (θ_H2O≈5–95°) and surface energies on a single substrate. These gradient energy substrates are developed to potentially generate libraries for combinatorial studies of thin film phenomenology, where a systematic variation of interfacial surface energy represents one of the significant parameters along one axis. The graded oxidation process presents a systematic variation of surface chemical composition. We have utilized contact angle measurements and time-of-flight secondary ion mass spectrometry (ToF-SIMS) to investigate this variation for a series of ions, among which are SiCH₃⁺, SiOH⁺ and COOH⁻. We show that the macroscopic measurements of surface free energy/contact angle correlate with the detailed analysis of surface chemistry (as assessed by ToF-SIMS) on these test substrates.     

Alloy formation in mechanically activated mixtures

The physical mixtures of hydroxocarbonates of Cu and Ni with aluminium were activated using a laboratory planetary mill. The chemical reactions and alloy formations as the effects of grinding were followed by the phase analysis of solid products based on the thermogravimetry and X-ray diffractometry. Experimental evidence indicates that the nature of reactions and products of mechanical activation was dependent on the amount of aluminium and time of grinding. This revised version was published online in July 2006 with corrections to the Cover Date.     

Dehydration and dehydroxylation of reduced charge montmorillonite

Reduced charge montmorillonites (RCM) were prepared by the thermal treatment of lithiumsaturated montmorillonite. Samples prepared by mild thermal treatment with lithium contained more water sorbed than the original montmorrilonite. When RCMs were prepared, part of the lithium cations reacted with hydroxyl groups in the octahedral sheet and released protons, which reacted with the structure. Acid treatment probably enhanced the surface area. which was reflected in the amount of water sorbed. Deprotonation of hydroxyl groups was proved by the measurements of the ignition loss. The heating of lithium saturated montmorillonite at higher temperatures brough about the collapse of the interlayers and a decrease in the amount of water sorbed.     

采用热处理方法提高MEH-PPV单层聚合物有机发光二极管发光性能的研究

对以MEH－PPV为发光层的单层聚合物有机发光二极管（OLED）器件在最佳条件下进行真空热处理，并用金相显微镜观察施加电压后器件的阴极表面形貌。发现处理后的器件阴极表面的气泡及黑斑明显减少。器件的发光性能显著提高。与未经处理的器件相比，最大相对发光强度提高了一个数量级、启亮电压降低了2．0V，半寿命提高了12．7倍。初步分析表明热处理方法提高器件发光性能的主要原因在于有效地减少了器件在工作过程中由于焦耳热产生的某些气体，从而减少阴极表面气泡及黑斑的出现，另一方面，热处理方法也增强了有机发光层与阴极接触界面的结合力，提高电子注入水平。     

A comparative study of the silent discharge treatment of saturated and unsaturated hydrocarbon polymers

Dielectric barrier air discharge treatment of polyethylene, polypropylene, polyisobutylene, polystyrene, and polyisoprene substrates has been characterized by x-ray photoelectron spectroscopy (XPS). The relative reactivities of these polymers towards silent discharge oxidation are rationalized in terms of ozone molecules interacting with an excited surface. © 1994 John Wiley & Sons, Inc.     

Towards understanding the increase in strength of thermotropic polyesters with heat treatment

Thermotropic copolyester fibers of oxynaphthoate and oxybenzoate have been subjected to conditions that promote solid-state polymerization as well as annealing. The annealing process causes the crystals to perfect with a simultaneous increase in heat of fusion and melting temperature. Solid-state polymerization, a reaction rate-controlled process, causes the polymer viscosity average molecular weight to increase by chain extension from about 14,000 g/mole to more than 87,000 g/mole with a simultaneous impressive increase in tenacity from about 10 g/d (1.2 GPa) to almost 30 g/d (3.7 GPa). To understand the changes in mechanical properties, we have modeled the fiber structure as short rod-like molecules poorly bonded to a continuous matrix of parallel molecules. Lengthening of the reinforcing molecules facilitates better transfer of load from matrix to molecules, resulting in higher tenacity fibers. © 1994 John Wiley & Sons, Inc.     

医疗和危险废物高温洁净热处理及环境力学

结合2003年中国的突发危害公众健康的事件，分析了医疗、化学战剂及危险废物的分类、特性，比较了各种高温热处理技术的基本要求，方法分类和设备特点，包括：各类焚烧炉、热解炉和等离子体裂解装置．还对前处理工艺要求，尾气处理工艺等进行了分析讨论，讨论了防止二次污染的技术手段，特别介绍了二噁英等高危险性产物的特性．还介绍了发达国家的医疗废物和危险废物的管理、处置和二次污染防治等情况．     

活性污泥法处理城市污水中鼓风和纯氧两种曝气方法的比较

对活性污泥法处理城市污水中鼓风曝气和纯氧（或富氧）曝气这两种方法，从曝气设备结构、特点、工艺技术指标、运行管理及经济性等方面进行了分析和比较。