Classical Dynamics of H<Stack><Subscript>2</Subscript><Superscript>+</Superscript></Stack> in an Intense Laser Field by Using the Symplectic Method

The classical dynamics of 1D H₂⁺ in an intense field are discussed. The initial conditions are chosen at random in the field-free case, and then the Hamiltonian canonical equations of H₂⁺ system in the intense laser field are solved numerically by mean of the symplectic method under these initial conditions. The probabilities of survival, dissociation, ionization, and Coulomb explosion of H₂⁺ system in the intense laser field are obtained for different laser intensity based on the classical theory.     

纳秒强激光场中苯电离产生高价离子的研究

用25 ns脉冲Nd-YAG 532 nm的激光，在1010～1011 W•cm－2的光场强度下，利用飞行时间质谱对He、 N2、Ar载气条件下苯的激光电离过程进行了研究.发现当利用氩作为载气时，除观察到C2＋、C2H2+、C3H3+、C6H6+离子外，还观察到很强的Cq＋(q=1～3)高价离子.这些离子都有很高的平动能， C2＋的最可几平动能为12.9 eV， C3＋为37.5 eV.通过改变载气种类和压力及在不同光场强度条件下的实验，可以认为这些高价离子来源于含苯团簇的库仑爆炸过程.     

Effect of flame-sprayed Al–12Si coatings on the failure behaviour of pressurized fibre-reinforced composite tubes

Internal pressurization testing at room temperature was performed to evaluate the effect of flame-spraying aluminum-12silicon on the leakage behavior of fibre-reinforced composite tubes fabricated by filament winding, and covered with garnet sand. A group of specimens were completely coated with flame-sprayed metal particles and another set remained uncoated. t-tests were conducted at a significance level of α = 0.05 to analyze the effect of the coating on the leakage behavior of the specimens. Ultraviolet imaging was used to illustrate a characteristic leakage pattern of the composite tubes. Coated specimens exhibited slightly higher mean leakage and burst pressures than the uncoated specimens. The t-test results provided strong statistical evidence that the flame spraying process employed did not damage the filament wound tubes covered with garnet sand.     

Deflagration-to-detonation transition process for spherical aluminum dust/epoxypropane mist/air mixtures in a large-scale experimental tube

The deflagration-to-detonation transitions (DDTs) for clouds of spherical aluminum dust (SAD) mixed with air or epoxypropane mist (EPM) and air were investigated in a 29.6-m-long experimental tube of 199 mm in diameter. The clouds formed through the injection of SAD and SAD/liquid epoxypropane samples into the experimental tube. Explosions of the SAD/air mixture were initiated using a 7-m-long EPM/air cloud explosion ignited by a 40-J electric spark. Explosions in SAD/EPM/air clouds were initiated using a 1...     

船载特种设备基点轨迹测量的误差分析

对船载特种设备基准点的空间位置进行测量,得到该基准点的运动轨迹并进行测量误差分析,是某项工程数据处理的重要内容.提出了利用三台船载GPS接收机测量船载特种设备基准点的原理和误差分析方法,介绍了该方法的误差源构成,依据测量原理模型,推导出定位精度的估算公式,并叙述了仿真计算与测量实施.     

HL-2M 真空室保温层设计及安装

基于 HL-2M 真空室烘烤保温要求，通过有限元分析和原型件实验确定采用陶瓷纤维与纳米级微孔材 料组合作为 HL-2M 真空室保温材料。在 30℃时，保温层的导热系数小于 0.027W⋅m⁻¹·℃⁻¹；300℃时，导热系数 小于 0.038W⋅m⁻¹·℃⁻¹。在保温层厚度 25mm、热面温度 300℃且达到稳态时，冷面可控制在 85℃以下，线圈侧的 温度低于 60℃，整体热损失小于 12kW，满足 HL-2M 真空室烘烤需求。      

Saturation of Berge hypergraphs

Given a graph $F$, a hypergraph is a Berge- $F$ if it can be obtained by expanding each edge in $F$ to a hyperedge containing it. A hypergraph $H$ is Berge-$F$-saturated if $H$ does not contain a subhypergraph that is a Berge-$F$, but for any edge $e\in E\left(\overline{H}\right)$, $H+e$ does. The $k$-uniform saturation number of Berge-$F$ is the minimum number of edges in a $k$-uniform Berge-$F$-saturated hypergraph on $n$ vertices. For $k=2$ this definition coincides with the classical definition of saturation for graphs. In this paper we study the saturation numbers for Berge triangles, paths, cycles, stars and matchings in $k$-uniform hypergraphs.     

受限空间油气爆燃火焰形态

通过受限空间油气爆燃可视化实验发现，在不同初始油气体积分数下，爆燃火焰呈现出不同的表观特征，据此提出了受限空间油气爆燃的3种火焰形态，即光滑球形火焰、褶皱球形火焰和卷曲絮状火焰。分析了3种火焰形态的形成机理，并通过实验观测与理论分析，给出了区分3种火焰形态的临界条件。结合实验中采集到的关键参数，总结了不同的火焰形态下受限空间油气爆燃的反应产物、最大压力、升压速率、反应时间、火焰强度等关键参数的特征与变化规律。     

An analysis of peak overpressures in vented gaseous explosions

Experimental data from vented explosion tests using stoichiometric methane–air and 18% hydrogen–air mixtures in a 63.7 m³ chamber with a 2.7 or 5.4 m² vent are presented. Results from experiments conducted using stoichiometric propane–air in 2.42 m³ vessel with a 0.26 m² vent are also reported. The tests were focused on the effect of fuel, enclosure size, ignition location, vent size, and obstacles on the pressure development of a propagating flame in a vented enclosure. The dependence of the maximum pressure generated on the experimental parameters was analyzed. It was found that the pressure maxima may be caused by pressure transients controlled by the interplay of the maximum-flame area, the burning velocity, and the overpressure generated by an external explosion. A simple model was proposed to estimate the maximum pressure for each of the main pressure transients. The model was found to agree with the experimental data within the experimental uncertainty.     

2,2,2-三硝基乙基-N-硝基甲胺的热安全性

为评价2,2,2-三硝基乙基-N-硝基甲胺(TNMA)的热安全性, 得到计算TNMA热安全性参数用的基本数据, 用经验式估算了TNMA的比热容(C_p)和热导率(λ). 用键能贡献于生成热Q_f的加和法, 估算了TNMA的标准生成焓Δ_cH_m^θ(TNMA, s, 298.15 K). 用热力学公式计算了TNMA的标准燃烧焓ΔU_m^θ(TNMA, s, 298.15 K)和标准燃烧能Δ_cH_m^θ(TNMA, s, 298.15 K). 用Kamlet-Jacobs 公式估算了爆速、爆压和爆热. 用经验式估算了分解热(Q_d). 通过差示扫描量热(DSC)曲线和高灵敏度布鲁顿玻璃薄膜压力计测得的逸出气体标准体积(V_H)-时间(t)曲线, 得到了TNMA放热分解反应的动力学参数. 用上述基本数据得到了评价TNMA的热安全性参数: 自加速分解温度(T_SADT), 热爆炸临界温度(T_be0和T_bp0), 绝热至爆时间(t_TIad), 撞击感度50%落高(H₅₀), 热点起爆临界温度(T_cr), 被300 K环境包围的半厚和半径为1 m的无限大平板、无限长圆柱和球形TNMA的热感度概率密度函数S(T), 相应于S(T)-T关系曲线最大值的峰温(T_S(T)max), 安全度(SD), 临界热爆炸环境温度(T_acr)和热爆炸概率(P_TE). 结果表明: (1) TNMA有较好的热安全性和对热抵抗能力, 与环三亚甲基三硝胺(RDX)相比, TNMA易从热分解过渡到热爆炸; (2) 不同形状大药量TNMA 热安全性降低的次序为: 球>无限长圆柱>无限大平板; (3)TNMA有高的燃烧能、高的爆轰化学能(爆热)和接近环四亚甲基四硝胺(HMX)的爆炸性能, 其对冲击敏感, 冲击感度与季戊四醇四硝酸酯(PETN)和特屈尔接近, 可用作混合炸药主组分.