L-脯氨酸催化的不对称Aldol缩合反应实验设计

介绍了L-脯氨酸催化的对硝基苯甲醛与丙酮的不对称Aldol反应的实验设计。室温反应2 h后，柱层析得到（R）-4-（4-硝基苯基）-4-羟基-2-丁酮，利用手性高效液相色谱测试得到产物的ee值。学生实验结果显示，收率范围为53%~74%，对映选择性范围为62%~69%。本实验方案将Aldol反应的研究成果设计成综合性实验，不仅强化训练了学生基本的实验技能和操作，同时拓宽了知识面，培养了学生分析问题、解决问题等方面的综合能力。     

Influences of aerodynamic loads on hunting stability of high-speed railway vehicles and parameter studies

The influences of steady aerodynamic loads on hunting stability of high-speed railway vehicles were investigated in this study.A mechanism is suggested to explain the change of hunting behavior due to actions of aerodynamic loads：the aerodynamic loads can change the position of vehicle system（consequently the contact relations）,the wheel/rail normal contact forces,the gravitational restoring forces/moments and the creep forces/moments.A mathematical model for hunting stability incorporating such influences was developed.A computer program capable of incorporating the effects of aerodynamic loads based on the model was written,and the critical speeds were calculated using this program.The dependences of linear and nonlinear critical speeds on suspension parameters considering aerodynamic loads were analyzed by using the orthogonal test method,the results were also compared with the situations without aerodynamic loads.It is shown that the most dominant factors a ff ecting linear and nonlinear critical speeds are different whether the aerodynamic loads considered or not.The damping of yaw damper is the most dominant influencing factor for linear critical speeds,while the damping of lateral damper is most dominant for nonlinear ones.When the influences of aerodynamic loads are considered,the linear critical speeds decrease with the rise of cross wind velocity,whereas it is not the case for the nonlinear critical speeds.The variation trends of critical speeds with suspension parameters can be significantly changed by aerodynamic loads.Combined actions of aerodynamic loads and suspension parameters also a ff ect the critical speeds.The effects of such joint action are more obvious for nonlinear critical speeds.     

Deflagration-to-detonation transition process for spherical aluminum dust/epoxypropane mist/air mixtures in a large-scale experimental tube

The deflagration-to-detonation transitions (DDTs) for clouds of spherical aluminum dust (SAD) mixed with air or epoxypropane mist (EPM) and air were investigated in a 29.6-m-long experimental tube of 199 mm in diameter. The clouds formed through the injection of SAD and SAD/liquid epoxypropane samples into the experimental tube. Explosions of the SAD/air mixture were initiated using a 7-m-long EPM/air cloud explosion ignited by a 40-J electric spark. Explosions in SAD/EPM/air clouds were initiated using a 1...     

Reversible solubilisation through hydrogen-bond-mediated assembly

A novel approach was developed to improve the solubility of non-soluble compounds by introducing solubilising molecules peripherally through hydrogen-bond-mediated assembly. The solubilisation process can be reversed by adding competing hydrogen bonding moieties and removing the solubilising molecules. This method may potentially facilitate device fabrication.     

Synthesis of Depo‐Medrol–chitosan hydrogel as new drug slow‐release appliance and investigation of release kinetics by high‐performance liquid chromatography

The present study deals with preparation and optimization of a novel chitosan hydrogel‐based matrix by suspension cross‐linking method for controlled release of Depo‐Medrol. The controlled release of Depo‐Medrol for effective Rheumatoid arthritis disease has become an imperative field in the drug delivery system. In this context, it was intended to optimize loading circumstances by experimental design and also study the release kinetics of Depo‐Medrol entrapped in the chitosan matrix in order to obtain maximal efficiency for drug loading. The optimum concentrations of chitosan (2.5 g), glutaraldehyde (3.05 μL) and Depo‐Medrol (0.1 mg) were set up to achieve the highest value of drug loaded and the most sustained release from the chitosan matrix. In vitro monitoring of drug release kinetic using high‐performance liquid chromatography showed that 73% of the Depo‐Medrol was released within 120 min, whereas remained drug was released during the next 67 h. High correlation between first‐order and Higuchi's kinetic models indicates a controlled diffusion of Depo‐Medrol through the surrounding media. Moreover, recovery capacity >82% and entrapment efficiency of 58–88% were achieved under optimal conditions. Therefore, the new synthesized Depo Medrol–chitosan is an applicable appliance for arthritis therapy by slow release mechanism. Copyright © 2016 John Wiley & Sons, Ltd.     

What can statistical process control show us about ionization chamber stability?

PurposeStatistical process control (SPC) has been shown to be a suitable tool for medical physicists to monitor quality and keep variability low and within specifications. We report our findings regarding ionisation chamber stability in our department when using a radioactive stability check device (RSCD) and we compare them with similar previously published records, including calibration results.MethodsWe retrospectively studied the stability of a PPC 40 parallel-plate chamber, and two Farmer chambers (FC65-G and FC65-P) by checking them with dedicated RSCDs. We analysed the data following SPC methodology which includes plotting I-MR control charts, monitoring out-of-control observations, calculating process capability ratios (C_p), and estimating conformance to specifications. We also estimated the C_p and adherence to specifications of previously published data.ResultsThe PPC40 chamber hardly went out of the control limits over the whole six-year period assessed. However, Farmer chamber verifications drifted in opposite directions in phase II, and the deviations observed did not agree with their calibration records, which only increased by a maximum of 0.5%. In phase I the most unstable chamber was the FC65-P with a C_p equal to 0.9 at a specification level of ±1%. The PPC40 chamber was stable to within a maximum C_p of 1.3. Several sets of analysed data, including ours and those from other authors, fitted well within these limits: within ±1.9% and ±1.5% for a C_p of 1.5 and 1.33 respectively.ConclusionsSPC with constant long-term RSCD checking gave us a meaningful plot of the instability of our ionisation chambers. Although a period of two years between calibrations should not be surpassed, in the interim this check can conform to specifications of ±1.5%.     

Improved device reliability in organic light emitting devices by controlling the etching of indium zinc oxide anode

A controllable etching process for indium zinc oxide （IZO） films was developed by using a weak etchant of oxalic acid with a slow etching ratio. With controllable etching time and temperature, a patterned IZO electrode with smoothed surface morphology and slope edge was achieved. For the practical application in organic light emitting devices （OLEDs）, a sup- pression of the leak current in the current-voltage characteristics of OLEDs was observed. It resulted in a 1.6 times longer half lifetime in the IZO-based OLEDs compared to that using an indium tin oxide （ITO） anode etched by a conventional strong etchant of aqua regia.     

DNA purification using dynamic solid-phase extraction on a rotationally-driven polyethylene-terephthalate microdevice

We report the development of a disposable polyester toner centrifugal device for semi-automated, dynamic solid phase DNA extraction (dSPE) from whole blood samples. The integration of a novel adhesive and hydrophobic valving with a simple and low cost microfabrication method allowed for sequential addition of reagents without the need for external equipment for fluid flow control. The spin-dSPE method yielded an average extraction efficiency of ∼45% from 0.6 μL of whole blood. The device performed single sample extractions or accommodate up to four samples for simultaneous DNA extraction, with PCR-readiness DNA confirmed by effective amplification of a β-globin gene. The purity of the DNA was challenged by a multiplex amplification with 16 targeted amplification sites. Successful multiplexed amplification could routinely be obtained using the purified DNA collected post an on-chip extraction, with the results comparable to those obtained with commercial DNA extraction methods. This proof-of-principle work represents a significant step towards a fully-automated low cost DNA extraction device.     

Theoretical analysis of the radiation effect on the transient behavior of optoelectronic integrated devices

Theoretical analysis of the radiation effect on transient behavior of an optoelectronic integrated device composed of a heterojunction phototransistor and a light emitting diode is studied theoretically. First, the transient behavior and the rise time of this device before radiation are investigated based on the frequency response of the constituent devices and the optical feedback inside the device. Second, the effect of neutron irradiation flux on the transient behavior of this device is theoretically studied. The results show that, by increasing the optical feedback inside the device, the rise time in the amplification mode is increased along with an increasing output, while that in the switching mode can be reduced effectively, and the neutron irradiation reduces the transient response and the rise time in both the amplification and switching modes. This type of model can be exploited as optical amplifier, optical switching device, and other applications.