可见近红外光响应直接Z型异质结光催化剂LaNiO3/CdS的产氢性能

通过冷凝-回流方式制备可见近红外光响应直接 Z型 LaNiO₃/CdS纳米杂化物,在对其进行物理化学表征后将其应用于光解水产氢反应。在可见光照射下,LaNiO₃/CdS光催化剂在5 h的H₂产量达到737 μmol,其H₂产量是CdS的4.3倍(172 μmol)。光电化学测试证实,LaNiO₃/CdS之间异质结的构筑能有效地促进光生载流子在界面的迁移、分离,从而促进其光解水产氢效率和稳定性的提高。同时随着近红外光的引入,其产氢活性提高至996 μmol。在上转换荧光测试中,LaNiO₃在808 nm光激发下在406和628 nm显示出发射荧光,这表明其能在近红外光照射下产生光生载流子,从而进一步提高其光解水产氢效率。     

Elimination Voltammetry of Miniaturized Mercury Drop Electrodes

Elimination voltammetry with linear scan (EVLS) in connection with renewed mini‐ drop mercury electrodes provides valuable information about the character and kinetics of processes at electrode/electrolyte interfaces. Based on the experiment related to the hydrogen evolution, it is presented that the EVLS is more sensitive than other voltammetric methods. Using miniaturized mercury electrodes, the EVLS is capable of detecting the effect of spherical diffusion associated with both the scan rates and the size of an electrode drop.     

低碳钢大气腐蚀室内模拟加速腐蚀试验与锈蚀规律

建立实验室模拟大气腐蚀的干湿循环加速腐蚀方法.提出低碳钢锈蚀的分段演化规律,演化规律对应于锈层致密度转折和锈层结晶组分的形成,显示分段规律的合理性.实验室获得的低碳钢锈蚀演化规律与其在万宁和沈阳两个大气站现场曝晒的最新结果有相关性,证明加速腐蚀方法的可靠性.     

复合金属氧化物Sn-Sb-Mn/陶瓷粒子电极体系的电催化性能

通过热分解法制备了复合金属氧化物Sn-Sb-Mn/陶瓷粒子电极, 分别采用扫描电子显微镜(SEM)、能量色散X 射线能谱(EDS)、X射线衍射(XRD)和N2吸附-脱附等技术对电极的形貌、晶相组成、比表面积和孔径分布进行了表征. 考察了该三维粒子电极系统的析氧特性, 采用循环伏安法分析了三维系统的电催化性能, 并且进行了电化学催化降解苯酚的试验. 结果表明, 制备的陶瓷粒子电极涂层比表面较大、孔结构发达, 有利于电催化反应; 电催化降解主要发生在电化学析氧区; 粒子电极系统对苯酚降解作用显著, 明显高于二维电极系统, 苯酚的去除率为92.3%, 总有机碳(TOC)的去除率为66.7%. 研究结果表明, 该三维粒子电极系统具有优良的电催化性能.     

硫酸介质中Ti／SnO2／PbO2析氧阳极的研究

由于硫酸溶液具有高的电导、一般条件下性质稳定、价格相对低廉等优点，所以电化学合成大多在硫酸溶液中进行．阳极析氧是电化学合成不可避免的阳极过程．但因硫酸的强腐蚀性，以及从阳极析出的氧的强氧化性，使得能满足工业生产的阳极材料很缺乏．自１９５０年荷兰Ｈｅｎ...     

Morphological evolution and orientation development of stretched iPP films: Influence of draw ratio

Varying the processing conditions of semicrystalline polymers can produce different morphologies of crystallization, which leads to different properties. There have been extensive studies of flow‐induced crystallization on isotactic polypropylene (iPP) using predominantly shear flow. A stretching method, deduced from extrusion, was introduced to study the morphological evolution of elongation‐induced shish‐kebab crystallization. Different morphologies of the resultant samples with different draw ratios (DRs) were carefully investigated and characterized via differential scanning calorimetry, polarizing light microscopy, scanning electron microscopy, atomic force microscopy, and 2D small‐angle X‐ray scattering. In addition, the degree of orientation of the samples with different DRs was also investigated using the 2D wide‐angle X‐ray scattering technique. The results indicate that the elongation‐induced morphology is strongly dependent on the effective stretching flow expressed in terms of the DR, which is defined as the ratio of rates between take‐up and the extrusion. The spherulite is dominant at low DRs, but it starts to deform along the stretching direction with increasing DR. The shish‐kebab structure in the stretched film, composed of stretched chains (shish) and layered crystalline lamellae (kebabs), increases gradually with an increase in the DR, whereas the spherulites gradually decreased. Furthermore, the overall orientation of α‐phase crystals, expressed by the Hermans orientation parameter, is also found to increase dramatically with the DR, and the rate of increase strongly depends on the DR. The different crystal morphologies are attributed to crystallization induced by different elongations of the stretched iPP films. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1223–1234, 2010     

Bioinspired polymer functionalized with a diiron carbonyl model complex and its assembly onto the surface of a gold electrode via “click” chemistry

A complex pendant with two ethynyl groups, [Fe₂(μ‐SCH₂CCH)₂(CO)₆] ( 2 ), as a model of the diiron subunit of [FeFe]‐hydrogenase was polymerized and the {Fe₂(CO)₆} core was successfully incorporated into the polymer matrix. The polymer was characterized by a variety of spectroscopic techniques, TGA, FTIR, SEM, TEM, and NMR. The resultant polymer was immobilized via “click” chemistry using its terminal C?CH bond onto the surface of a gold electrode, which was premodified with azidothiol by self‐assembled monolayer (SAM). The assembled electrode showed electrochemical responses. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2410–2417, 2010     

FeO(OH)-TiO2/CoPi复合光阳极的制备及其光电催化氧化水性能

采用溶胶-凝胶法制备了TiO₂ 纳米晶, 并通过浸渍技术在其表面引入了FeO(OH). 采用紫外-可见(UV-Vis)吸收光谱确定了引入FeO(OH)的最佳Fe³⁺浓度. 通过电化学法在FeO(OH)-TiO₂光阳极上沉积了催化水分解制备氧气的钴基催化剂(CoPi), 得到了FeO(OH)-TiO₂/CoPi 复合光阳极. 利用透射电镜(TEM), 高分辨透射电镜(HRTEM), X射线衍射(XRD), 扫描电镜(SEM)对TiO₂纳米晶, FeO(OH)-TiO₂以及FeO(OH)-TiO₂/CoPi复合光阳极进行了表征, 采用电化学和光电化学技术研究了中性条件下FeO(OH)-TiO₂/CoPi 复合光阳极的光电催化分解水性能. 结果表明, TiO₂纳米晶为梭形的锐钛矿, 其表面修饰的FeO(OH)为针铁矿型, 且当前驱体溶液中Fe³⁺与TiO₂的质量比为0.05%时得到的FeO(OH)-TiO₂具有最佳的光吸收效果. 形成FeO(OH)-TiO₂/CoPi复合光阳极后, 在光照条件下CoPi 电催化分解水制备氧气的过电位显著降低. TiO₂表面FeO(OH)的引入增加了光阳极对可见光的吸收能力, 同时光阳极表面沉积的CoPi有效地利用了FeO(OH)-TiO₂产生的光生空穴, 将水氧化形成氧气, 从而在光照条件下显著提高了CoPi催化氧化水的效率.     

Interaction between N-Phospho-Amino Acids and Nucleoside in Aqueous Medium

Thebiosynthesisofnucleicacid,oneofthemostimportantbio-macromolecules,isahighlyelegantprocess,whichinvolvestheparticipationofmanyenzymesandenergycarriers,suchasATP',whilechemicalsynthesisofoligonucleotidesgenerallyinvolvescomplicatedprotectinganddeprotectingprocesses'.Inthepreviouswork,nucleotidesandoligonucleotidesweredirectlyformedacthereaction,,-ofN-(O,O-diisopropyl)phosphorylthreonineanduridineinanhydrouspyridine'.SoN-(O,O-diisopropyl)phospho-aminoacid(DIPP-aa)wasproposedasamodelcompou…