Modeling of the Simultaneous Hydrogen Evolution and Cobalt Electrodeposition

A mathematical model of simultaneous cobalt deposition and hydrogen evolution was developed and applied to the electroreduction process of 5 mM Co²⁺ ions investigated by cyclic voltammetry (CV) technique at different hydrogen ion concentrations (pH=2, 3, 4). The kinetic parameters of such a complex process were determined, and the validity of the model and its sensitivity to changes in individual parameters were verified. The relative value of the approximate standard deviation (ASD_%) was used to determine the degree of fit of the model to the experimental data. The catalytic effect of cobalt on the hydrogen evolution process was comprehensively confirmed.     

Galvanostatically Deposited PtNi Thin-Films as Electrocatalysts for the Hydrogen Evolution Reaction

The synthesis of hybrid platinum materials is fundamental to enable alkaline water electrolysis for cost-effective H₂ generation. In this work, we have used a galvanostatic method to co-deposit PtNi films onto polycrystalline gold. The surface concentrations of Ni (Γ_Ni) and Pt (Γ_Pt) were calculated from electrochemical measurements; the Γ_Pt/Γ_Ni ratio and electrocatalytic activity of these materials towards hydrogen evolution reaction (HER) in 1 M KOH show a strong dependence on the current density pulse applied during the electrodeposition. Analysis of the Tafel parameters hints that, on these deposits, HER proceeds through a Volmer-Heyrovsky mechanism. The galvanostatically deposited PtNi layers present a high current output per Pt gram, 3199 A g_Pt⁻¹, which is significantly larger compared to other PtNi-based materials obtained by more extended and more complex synthesis methods.     

Hydrogen evolution reaction on Pt and Ru in alkali with volmer-step promotors and electronic structure modulators

Alkaline water electrolysis despite having a variety of choices for anodic oxygen evolution reaction (OER) catalysts out of non-precious metals suffers significantly due to the poor kinetics of cathodic hydrogen evolution reaction (HER) even with the state-of-the-art Pt and equally active Ru. The Volmer-step (water dissociation (WD) coupled proton adsorption) of alkaline HER is mostly the rate-determining step (RDS) and costs most of the work required. In this review, recent developments in improving the HER kinetics of Pt and Ru with Volmer-step promotors and electronic structure modulators have been comprehensively analyzed and critically presented with the challenges and prospects.     

Introduction of high valent Mo6+ in Prussian blue analog derived Co-layered double hydroxide nanosheets for improved water splitting

Herein, we report a facile method for synthesizing MoCo-layered double hydroxide (LDH) nanosheets employing Prussian blue analog (PBA) as the precursor. The introduction of Mo in Co-LDH modulates the electronic structure, increases the number of active sites and electrochemical surface area to improve the hydrogen evolution, oxygen evolution, and overall water splitting activity. As a result, PBA-derived Mo_0.25Co_0.75-LDH nanosheets demonstrated 10 mA cm^?2 current density at only 220 mV and 115 mV overpotentials for OER and HER, respectively. The overall water splitting was attained at 1.52 V cell voltage for 10 mA cm^?2 current density.     

Circumventing the OCl versus OOH scaling relation in the chlorine evolution reaction: Beyond dimensionally stable anodes

The development of selective electrocatalysts for the chlorine evolution reaction (CER) is majorly restrained by a scaling relation between the OCl and OOH adsorbates, rendering that active CER catalysts are also reasonably active in the competing oxygen evolution reaction (OER). While theory predicts that the OCl versus OOH scaling relation can be circumvented as soon as the elementary reaction steps in the CER comprise the Cl rather than the OCl adsorbate, it was demonstrated recently that PtN₄ sites embedded in a carbon nanotube follow this theoretical prediction. Advanced experimental analyses illustrate that the PtN₄ sites also reveal a different reaction kinetics compared to the industrial benchmark of dimensionally stable anodes (DSA). A reverse Volmer–Heyrovsky mechanism was identified, in which the rate-determining Volmer step for small overpotentials is followed by the kinetically limiting Heyrovsky step for larger overpotentials. Since the PtN₄ sites excel DSA in terms of activity and chlorine selectivity, we suggest the Cl intermediate as well as the reverse Volmer–Heyrovsky mechanism as the design criteria for the development of next-generation electrode materials beyond DSA.     

The preparation of ionic liquid based iron phosphate/CNTs composite via microwave radiation for hydrogen evolution reaction and oxygen evolution reaction

Water electrolysis is a promising method for hydrogen production, so the preparation of low-cost and efficient electrocatalysts with a quick and simple procedure is crucial. Herein, iron phosphate (Fe₇(PO₄)₆) was prepared via microwave radiation using ionic liquid (IL) as iron and phosphorus dual-source. This method is simple and rapid, and the product can be directly used as electrocatalysts without further treatment. The experimental results show that the IL can influence the morphology and electrocatalytic performance. Moreover, the addition of carbon nanotubes (CNTs) is favorable for formation of iron phosphate nanoparticles to improve the catalytic activities. As hydrogen evolution reaction (HER) catalyst, this iron phosphate/CNTs exhibits an onset overpotential of 120 mV, Tafel slope of 32.9 mV dec^-1, and current densities of 10 mA cm⁻² at overpotential of 185 mV. Then, it obtains a good activity for oxygen evolution reaction (OER) with a low onset potential of 1.48 V, Tafel slope of 73.3 mV dec^-1, and it only needs an overpotential of 300 mV to drive the 10 mA cm⁻². This bifunctional catalyst also shows good durability for HER and OER. This microwave-assisted method provides an outstanding strategy to prepare iron phosphate in a simple and fast process with good catalytic performance for water splitting.     

Phase‐Junction Electrocatalysts towards Enhanced Hydrogen Evolution Reaction in Alkaline Media

To ensure sustainable hydrogen production by water electrolysis, robust, earth‐abundant, and high‐efficient electrocatalysts are required. Constructing a hybrid system could lead to further improvement in electrocatalytic activity. Interface engineering in composite catalysts is thus critical to determine the performance, and the phase‐junction interface should improve the catalytic activity. Here, we show that nickel diphosphide phase junction (c‐NiP₂/m‐NiP₂) is an effective electrocatalyst for hydrogen production in alkaline media. The overpotential (at 10 mA cm^?2) for NiP₂‐650 (c/m) in alkaline media could be significantly reduced by 26 % and 96 % compared with c‐NiP₂ and m‐NiP₂, respectively. The enhancement of catalytic activity should be attributed to the strong water dissociation ability and the rearrangement of electrons around the phase junction, which markedly improved the Volmer step and benefited the reduction process of adsorbed protons.     

Monolayer 1T and 1T′ MoSO as Promising Electrocatalyst for Hydrogen Evolution based on First Principle Calculations

Molybdenum disulfide (MoS₂) has been regarded as one of the most promising candidates for replacing Pt group noble metals as an efficient electrocatalyst to enhance the hydrogen evolution reaction (HER) in consideration of its relatively high earth abundance. Recent studies show that the catalytic efficiency of MoS₂ for HER can be promoted by the presence of 1T-phase MoS₂. It is hard to precisely control the formation of 1T-MoS₂, however, due to its metastability relative to 2H-MoS₂. Elevating the stability of 1T phase allotrope is therefore of great importance and could be realized by replacing divalent S with monovalent elements or groups according to crystal field theory, which has been demonstrated through our first-principles density functional theory (DFT) calculation results. Differential Gibbs free energy analysis for hydrogen adsorption (ΔG_H*) suggest that 1T and 1T′ MoSO (O doped MoS₂) might be taken as potential candidate catalysts for HER process with better performance than 1T and 1T′ MoS₂. We also propose a probable approach to synthesize 1T and 1T′ MoSO under oxidation circumstance environment of graphene oxide.     

Transition metal-based electrocatalysts for overall water splitting

Electrochemical overall water splitting is attracting a broad focus as a promising strategy for converting the electrical output of renewable resources into chemical fuels, specifically oxygen and hydrogen. However, the urgent challenge in water electrolysis is to search for low-cost, high-efficiency catalysts based on earth-abundant elements as an alternative to the high-cost but effective noble metal-based catalysts. The transition metal-based catalysts are more appealing than the noble metal catalysts because of its low cost, high performance and long stability. Some recent advances for the development in overall water splitting are reviewed in terms of transition metal-based oxides, carbides, phosphides, sulfides, and hybrids of their mixtures as hybrid bifunctional electrocatalysts. Concentrating on different catalytic mechanisms, recent advances in their structural design, controllable synthesis, mechanistic insight, and performance-enhancing strategies are proposed. The challenges and prospects for the future development of transition metal-based bifunctional electrocatalysts are also addressed.     

Surface oxidized iron-nickel nanorods anchoring on graphene architectures for oxygen evolution reaction

Surface oxidized iron-nickel nanorods coupling with reduced graphene architectures (FeNi-O-rGA) are successfully constructed via hydrothermal, freeze-drying, and thermal activation approaches. The hierarchical structure can provide lots of pathways for fast ion diffusion and charge transfer, and expose abundant catalytic sites. Meanwhile, the activity of FeNi-O-rGA is boosted by the optimized metal-oxygen bond strength in FeNi₃ alloys. Partial oxidized FeNi nanorods are strongly coupled with rGA by the formation of metal-O-C bonds, which can impede the aggregation of FeNi₃ alloys and increase the utilization of active sites. The special structure and partially oxidized FeNi nanorods for FeNi-O-rGA can result in excellent OER activity and catalytic stability. Only 215 mV of overpotential is required to drive the current density of 10 mA/cm² as well as the Tafel slope of 50.9 mV/dec in 1 mol/L KOH. The change of surface chemistry of FeNi-O-rGA is confirmed by XPS after the OER test, which indicates the highly catalytic stability of FeNi-O-rGA due to the formation of intermediate metal oxyhydroxide.