Rheological properties of liver actin solutions

G-actin prepared from pork liver and purified to give a product of 95–98% purity was polymerized to F-actin in a rotational dynamic viscometer. The rheological properties were investigated during the course of polymerisation and after polymerisation. G andG measured at frequencies around 0.1 Hz increased strongly during the first 3 hours of the reaction and then slowly approached a constant value in the range of 10–50 mPa. The rise during polymerisation was more than two orders of magnitude. When a solution of F-actin was subjected to steady shear at a high shear rate for a short period of time and subsequently dynamic measurements were performed, then a considerably smallerG (about 70% smaller) was observed immediately after cessation of the steady shear.G then increased with time and approached its initial value.When measuring the viscosity of F-actin solutions as a function of shear rate, a strong shear thinning effect was seen which did not vanish even at shear rates as low as 0.001 s^–1. Even at this low shear rates, a pronounced yield maximum was observed before reaching the steady state. Oscillatory experiments showed a remarkably weak frequency dependence ofG. The results imply that F-actin solutions are largely structured forming a weak temporary network which can be easily destroyed by application of high shear rates. It seems most likely that the destruction occurs by a reversible, shear induced depolymerisation process.     

Involutory transformations and variational principles with multi-varoables in thin plate bending problems

In this paper, the generalizd variational principles of plate bending, froblems are established from their minimum potential energy principle and minimum complementary energy principle through the elimination of their constraints by means of the method of Lagrange multipliers. The involutory transformations are also introduced in order to reduce the order of differentiations for the variables in the variation. Funhermore, these involutory transformations become infacl the additional constraints in the varialion. and additional Lagrange multipliers may be used in order to remove these additional constraints. Thus, various multi-variable variational principles are obtained for the plate bending problems. However, it is observed that. nol all the constrainls ofva’iaticn can be removed simply by the ordinary method of linear Lagrange multipliers. In such cases, the method of high-order Lagrange multipliers are usedto remove iliose constrainls left over by ordinary linear multiplier method. And consequently. some funct ionals of more general forms are oblained for the generaleed variational principles of plate bending problems.     

光学材料热光系数的精确测量——“热光系数仪”

本文介绍用于光学材料系数精确测量的“热光系数仪”。该仪器采用两种干涉仪组合、微机控制和数据采集处理等设计方案,实现了高精度测量。低温区热膨胀系数α、折射率温度系数β热光系数W的测量精度可达±3×10~(-7)°C~(-1)。     

The optical properties of the laser beam passed through a turbulent shear layer

The related fluid dynamic theory, experimental device and some preliminary results of the study of the optical properties of a laser beam passed through a turbulent shear layer are presented. The method of image processing for the determination of the optical density from a interferogram by means of a Microneye Bullet and a Microcomputer is also described.     

Theory of oscillatory experiments with a coaxial cylinder viscometer

Equations are derived for the coaxial cylinder system in the combined oscillatory and steady-state shear mode. The limitations of the use of the various equations are presented. If the usual linear equations are used, the main limitation, in the case of oscillatory shear only, is that the frequency of measurement should be below 0.016 | ^*|/(r ₂ –r ₁ )². Here | ^*| is the modulus of the complex viscosity, is the density of the liquid andr ₁ andr ₂ are the radii of the cylinders. Furthermore it is shown that there is a small error in the numerical factor of the usually applied equations. The calculations are set up in such a way that extension to higher harmonics follows in a natural way. An experimental example illustrates the use of the derived equations.     

损伤材料裂纹尖端附近的应力场

本文导出了损伤材料的全量理论,导出了全量公式中H的渐近表达式;最后得到损伤材料平面应变条件下的裂纹尖端的应力应变场。     

空间轴对称变形界面裂纹尖端的应力奇异性分析

假定位移场,并将位移势函数展开成一系列的特征函数,代入空间轴对称变形的基本方程,推得界面裂纹的特征值理论。把这一理论应用到单向增强的连续纤维复合材料上,建立了纤维断裂、基体开裂等模型下应力奇异性的特征方程,分析了界面裂纹尖端的应力奇异性。     

弹性半空间地基上圆形基础板的位移场和应力场

针对弹性半空间地基上圆形基础底板的弯曲问题,根据地基土壤的受力特性和已有实验研究成果,假设圆形基础底板底部与地基土壤之间是由竖向集中荷载引起的接触应力分布形式,采用板的弯曲理论和通过数值积分及最小二乘法拟合的方法,推导出完全满足边界条件的弹性半空间地基上圆形基础底板上部受集中力作用、下部受幂函数形式连续分布荷载作用时的位移场、径向和环向应力场的表达式。尽管圆形基础板属于中厚度板,但是该表达式的计算精度和可靠性得到了有限元分析软件ANSYS验证。