氧极谱催化波法测定二苯胺

本文报道一种极谱测定二苯胺的新方法,它是基于二苯胺引起的氧极谱催化波.这个氧极谱催化波是由于二苯胺催化了电生超氧离子O_2~(-)的歧化反应产生的.本方法简单方便,有良好选择性.应用本方法测定了化工原料二苯胺的含量,结果令人满意.     

The gas phase reaction between CO2 and lanthanide atoms. A test of a model for the isokinetic effect

Summary Co₃O₄, NiCo₂O₄ and LaCo₂O₄catalysts were synthesizedby the citric acid-ligated method. These catalysts containing Co-oxide active components can largely lower the temperature of soot combustion under tight contact conditions. Under the conditions of loose contact NiCo₂O₄ cannot promote soot combustion, but LaCo₂O₄ can effectively promote soot combustion because the nanometric perovskite-type catalyst LaCoO₃produced in the LaCo₂O₄sample.</o:p>     

原位漫反射红外光谱研究氮氧化物在Ag-ZSM-5催化剂上的吸附态及选择性催化还原反应机理

利用原位分析方法对催化剂表面吸附态进行动态表征，对了解催化反应机理具有重要的意义。漫反射红外光谱是一种理想的原位方法，应用该方法在298－773K范围原位考察了以丙烯为还原剂，NO在Ag-ZSM-5催化剂上的吸附态及选择性催化还原过程。认为NO的选择性催化还原符合直接作用机理，还原的关键是形成有机－氮氧化物（R－NO2或R－ONO）中间体。O2的作用是使C3H6充分活化，并是有效产生有机－氮氧化物不可缺少的条件。     

General application of jäntti's method for the fast calculation of sorption equilibrium

On the basis of a molecular model for adsorption kinetics Jäntti introduced a method to calculate equilibriums shortly after a change of the pressure of the sorptive gas. In the present paper we show that this method is useful in many more situations than those intended originally.     

Sm修饰的Ni-MgO催化剂制备碳纳米管的研究

Carbon nanotubes (CNTs) have been synthesized over Ni-MgO and Ni-Sm-MgO catalysts by decomposition of CH₄ at 650 ℃. The addition of Sm into Ni-MgO catalyst not only promotes the catalytic activity and lifetime of the catalyst, but also improves the graphitization and heat stability of carbon nanotubes. The yield of CNTs obtained over the Ni-10Sm-MgO catalyst reaches 33 g C·(g Ni)^-1, being more than 5 times higher than that of the Ni-MgO catalyst. XRD and TPR results of the catalysts indicate that there is a remarkable interaction of Ni with Sm species, which facilitates the reduction of nickel and restrains the Ni particles from agglomerating.     

Fe-Ni-B-O纳米合金的合成及其催化制氢性能的研究

Preparation and catalytic performance of Fe-Ni-B-O nano-alloy having crystal-palpus structure has been studied. Black powder was synthesized by reducing mixture solution of Fe²⁺, Ni²⁺ with KBH₄ as reducing agent and polyethylene glycol as dispersant. Fe-Ni-B-O nano-alloy of crystal-palpus structure was obtained after hydrogen reduction of black powder. TEM shows that crystal-palpus length is 200～400 nm, diameter is 2～4 nm. The analytic results indicate that the total content of Fe and Ni is 86.6%, B is 5.08%. The alloy exhibits excellent catalytic performance. Hydrogen generation rate can approach 100% especially when pH is 8.     

关于meso—四苯基卟啉在冰醋酸中的存在形式

前言卟啉在生物化学、分析化学、药物化学等领域有着广泛研究和重要应用［１～３］。近年来虽然对卟啉类化合物的研究报道很多［４～６］，但对卟啉在酸性介质中的研究很少。较早期的研究工作认为卟啉类化合物在酸性介质中仅以其二酸形式存在［７］。本文实验结果显示ｍｅ...     

超细Ni-Cu-Co-La的制备及其催化乙腈加氢性能

以水合肼和硼氢化钾为共还原剂制备了四元合金催化剂Ni-Cu-Co-La,并将其应用于乙腈催化加氢反应.采用X射线衍射、X射线光电子能谱、透射电镜和H2程序升温脱附对催化剂进行了表征,考察了催化剂组分对乙腈选择性加氢制乙胺催化性能的影响.结果表明,Cu,Co和La的加入均不同程度地提高了催化剂的活性和选择性,在反应压力1.8 MPa,反应温度120℃,反应时间1 h的条件下,乙腈转化率和乙胺选择性分别为100%和98.24%,优于使用Raney Ni、非晶态Ni-B和Co-B合金催化剂时的结果.     

Thermal Study of the Cr-Mo-O System in Air

The phase diagram of the ternary system Cr-Mo-O in air was established from the results of thermal analysis of mixtures with different initial CrO3 to MoO3 ratios. It was found that MoO3 did not take any chromium oxide into solid solution. The presence of Cr2O3 destabilized MoO3 causing it to decompose to MoO2 in the temperature range 723-958 K depending on the initial Cr/Mo ratio. The decomposition of pure MoO3 MoO2 did not occur in air at any temperature. However, this decomposition took place through the formation of the compound Cr2O3·3MoO3(ss) and its decomposition to Cr2O3·3MoO2(ss). The latter compound has never been reported before and the X-ray data for this compound are given. The previously reported catalytic activity of Cr2O3·3MoO3(ss), at high temperatures, is presumably due to its reduction to Cr2O3·3MoO2(ss). This revised version was published online in July 2006 with corrections to the Cover Date.     

Phase Analysis of the Binary System of Cryolite (Na3AlF6) and Sodium Metasilicate (Na2SiO3)

The phase analysis of cryolite (Na₃AlF₆) and sodium metasilicate (Na₂SiO₃) was performed by thermal analysis. The eutectic system with a region of two immiscible substances at a concentration of Na₂SiO₃ between 42.8 and 46.3 mol‐% was identified and the eutectic temperature determined to (886±2) °C. Based on the results of mass‐loss measurements, it was assumed that the introduced Na₂SiO₃ reacts with Na₃AlF₆ due to the formation of some nonvolatile stable compounds. The stable reaction products were identified by X‐ray diffraction analysis and IR spectroscopy of the spontaneously cooled samples, which established the formation of NaF and stable amorphous aluminosilicate compounds.