interaction of nitro compounds with radicals: a quantum chemical study

Photoreduction of nitro compounds is accompanied by formation of various radical products that can react with the starting nitro compound, thus causing deviation of the decomposition kinetics from the first-order kinetics with respect to the nitro compound. The results of quantum chemical modeling of the reactions of nitro compounds with radicals and the pathways of further transformations of radical adducts formed in the reactions are presented. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 202–206, February, 2006.     

The physicochemical surface characteristics of Brevibacterium linens

The physicochemical surface characteristics and interfacial behavior of two strains of Brevibacterium linens (BL-MGE and BL-9174), that may enhance cheese flavor, were assessed. Cell surface hydrophobicity was determined by measuring the contact angle of a variety of polar and non-polar wetting agents on lawns of the bacterial cells. The contact angles obtained were used to calculate the cell surface free energy components γ^LW, γ^AB, γ⁺ and γ⁻. The Lifshitz van der Waals component and the Lewis acid-base component were approximately 35 mJ m⁻² and 22 mJ m⁻², respectively, for both strains. Under conditions of physiological pH and low ionic strength, neither strain exhibited affinity for an octyl ligand in hydrophobic interaction chromatography. This occurred despite a favorable free energy of interfacial interaction which was attributable almost entirely to favorable acid-base interactions between cells and octyl-sepharose. The nature of surface functional groups was evaluated using X-ray photoelectron spectroscopy. Excluding H, the mean percentage of atomic fraction for C, O, N and P for BL-MGE was 57.7, 37.8, 3.9 and 0.6%, respectively and 61.0, 31.8, 7.0 and 0.2%, respectively for BL-9174.     

KCl-LiCl-H2O体系热力学性质的研究

用K-ISE、Li-ISE和Cl-ISE测定了25 ℃时体系中KCl、LiCl的平均活度系数, 溶液的离子强度从0.1～4.0 mol·kg~(-1), 组成范围从纯的KCl到纯的LiCl。将Pitzer方程应用于测定结果, 用多元线性回归方法求出了Pitzer参数。     

KINETIC MODELING OF ESTERIFICATION OF EPOXY RESIN IN THE PRESENCE OF TRIPHENYLPHOSPHINE FOR PRODUCING VINYL ESTER RESIN: MECHANISTIC RATE EQUATION

Due to its mechanical properties and ease of use, vinyl ester resin is enjoying increasing consideration. This resin normally is produced by reaction between epoxy resin and unsaturated carboxylic acid. In the present study, bis-phenol A based epoxy resin and methacrylic acid was used to produce vinyl ester resin. The reaction was conducted under both stoichiometric and non-stoichiometric conditions in the presence of triphenylphosphine as catalyst. The stoichiometric and non-stoichiometric experiments were conducted at 95, 100, 105 and 110℃and at 90 and 95℃, respectively. The first order rate equation and mechanism based rate equation were examined. Parameters are evaluated by least square method. A comparison of mechanism based rate equation and experimental data show an excellent agreement. Finally, Arrhenius equation and activation energy were presented.     

内含式化合物X@Al12P12的结构与稳定性研究

采用B3LYP/6-31G*方法, 对内含式化合物X@Al₁₂P₁₂ (X＝Li^0/＋, Na^0/＋, K^0/＋, Be^0/2＋, Mg^0/2＋, Ca^0/2＋, H和He)的不同对称性构型进行计算, 讨论其最稳定构型的几何参数、布居分析、偶极矩、电离势、包含能、频率、HOMO-LUMO能隙和自旋密度．发现X@Al₁₂P₁₂化合物中, 客体X＝Na^0/＋, K^0/＋, Mg和He几乎处在笼的中心, Be和Ca^0/2＋处在中心附近0.033 nm的半径内, Li^0/＋, Be^2＋, Mg^2＋和H很大程度上偏离笼的中心位置. 大部分金属内含式化合物的C₃对称性构型稳定．Li^0/＋, Be^0/2＋, Mg^2＋, Ca^2＋和H与其它离子相比更易嵌入笼内形成稳定的内含式化合物.     

流体熵相关性质的Monte Carlo模拟新方法

提出了用于计算实际体系熵相关性质的Monte Carlo多级取样分子模拟方法. 应用这一方法, 对硬球流体的化学势及Helmholtz自由能进行了估算, 得到了满意的结果. 计算化学势时, 不存在通常试验粒子方法所遇到的高密度问题. 该方法特别适合规律性的系统研究, 较之普通模拟方法要有效得多. 模拟得到的硬球体系无限稀释组份的超额化学势与对比直径的关系, 在相变区域为一条双凹曲线; 无论是在相变区还是在单相区, Carnahan-Starling公式对这一关系的描述均有较大偏差.     

Thermodynamics of multicomponent electrolyte solutions: Aqueous mixtures of two salts from among NaCl,KCl, NaH2PO4, and KH2PO4 at 25° C

Five of the six possible aqueous two-salt mixtures from among NaCl, KCl, NaH₂PO₄,and KH₂PO₄ have been studied by the isopiestic method at 25°C. The sixth mixture, NaCl–KCl, has been studied previously. The deviations from ideal mixing behavior are described by a series of coefficients which were found by regression analysis. The coefficients were used to calculate the excess Gibbs energies of mixing for equal ionic strength fractions of each salt and the trace activity coefficient of each salt at an ionic strength of 2 mode-kg^–1. The cross-square mixing rule is obeyed within experimental uncertainty for the excess Gibbs energies of mixing.     

邻-甲氧基苯酚和α-,β-环糊精包合现象的理论与实验研究

通过紫外可见光谱法考察了水溶液中邻-甲氧基苯酚(o-Mop)和α-与β-环糊精(CD)的分子间相互作用, 利用Hildebrand-Benesi方程给出了两个包合物的稳定常数(K_s). 采用半经验PM3方法研究了α-,β-CD和o-Mop及其类似物苯酚(Phe)、丁香酚(Eug)之间的包络作用, 阐述了这些主客体包合作用过程中体系能量随主客体相对位置改变而变化的细节, 据此推断出主-客体包合物可能的分子结构, 计算了包合物的稳定化能(ΔE_s). 研究结果表明, 本文所选主客体体系而言, 当客体和同一种主体分子作用时, 超分子包合物的ΔE_s随着客体分子苯环上取代基团数目的增多而增加. 基于PM3方法优化得到的主-客体包合物在真空中的分子结构和通过实验方法在水溶液中测定的结构一致.     

微孔和介孔材料中的热化学

这篇论文综述了美国加州大学戴维斯分校科学院院士Navrotsky课题组多年来在多孔材料上取得的一系列热化学研究结果。讨论了热化学对微孔、介孔材料的结构稳定性和合成过程的影响。借助多种测热手段对影响骨架结构的热焓、热熵和自由能进行了系统的测量和计算。研究数据表明一系列纯硅分子筛、介孔材料和磷酸铝多孔材料同相应的石英相和块磷铝矿相相比能量上最多只高出15 kJ·mol-1。一系列纯硅分子筛的熵值比石英相高出3.2—4.2 J·K-1·mol-1；在0—12.6 J·K-1·mol-1范围内相对应的自由能几乎没有差别。因此，对不同微孔、介孔材料，其骨架结构在能量上是几乎没有区别的。另外，本文通过介绍一种新型测热方法——原位测热，揭示了分子筛合成过程中的动力学和成核/结晶机理。     

Effects of Total Thermal Balance on the Thermal Energy Absorbed or Released by a High-Temperature Phase Change Material

Front tracking and enthalpy methods used to study phase change processes are based on a local thermal energy balance at the liquid–solid interface where mass accommodation methods are also used to account for the density change during the phase transition. Recently, it has been shown that a local thermal balance at the interface does not reproduce the thermodynamic equilibrium in adiabatic systems. Total thermal balance through the entire liquid–solid system can predict the correct thermodynamic equilibrium values of melted (solidified) mass, system size, and interface position. In this work, total thermal balance is applied to systems with isothermal–adiabatic boundary conditions to estimate the sensible and latent heat stored (released) by KNO3 and KNO3/NaNO3 salts which are used as high-temperature phase change materials. Relative percent differences between the solutions obtained with a local thermal balance at the interface and a total thermal balance for the thermal energy absorbed or released by high-temperature phase change materials are obtained. According to the total thermal balance proposed, a correction to the liquid–solid interface dynamics is introduced, which accounts for an extra amount of energy absorbed or released during the phase transition. It is shown that melting or solidification rates are modified by using a total thermal balance through the entire system. Finally, the numerical and semi-analytical methods illustrate that volume changes and the fraction of melted (solidified) solid (liquid) estimated through a local thermal balance at the interface are not invariant in adiabatic systems. The invariance of numerical and semi-analytical solutions in adiabatic systems is significantly improved through the proposed model.