Osmotic and activity coefficients at 25°C for tetraalkylammonium bromides in deuterium oxide

Earlier work by Lindenbaum and Boyd has demonstrated the important role of hydrophobic interactions involving the water solvent in determining the osmotic coefficients and properties of aqueous solutions of the tetraalkylammonium halides. Osmotic coefficients of solutions of tetramethyl-, tetraethyl-, tetrapropyl-, and tetrabutylammonium bromides in the more highly structured solvent D₂O have now been determined by the gravimetric isopiestic method, using reference solutions of NaCl in D₂O. The data were fitted to the Rush-Johnson and Pitzer equations. Satisfactory agreement with the results for aqueous solutions at comparable concentrations indicates that the solution chemistry of these quaternary ammonium bromides is not highly dependent on the degree of structure of the pure solvents. Supplementary data for mixtures of Me₄NBr with Et₄NBr, Pr₄NBr, or Bu₄NBr in both H₂O and D₂O are consistent with this conclusion.On leave 1980–82 from Banaras Hindu University, India     

Sorption/diffusion behaviour of anionic surfactants in polyacrylamide hydrogels: from experiment to modelling

The sorption and diffusion processes of anionic surfactants with different chain length through polyacrylamide hydrogels with low swelling degree have been studied by electrical conductivity measurements. The multicomponent equilibrium equation has been used to model the sorption isotherms of different anionic surfactant in the hydrogels. Such isotherms show that initial rapid sorption of unimer surfactant into the membranes occurs, suggesting that non-freezing water can be involved in these interactions. In aqueous solution, at concentrations near and above the critical micelle concentration an anti-co-operative region is found. The diffusion coefficients of the anionic surfactants inside the hydrogel matrix show that the mobility of diffusing surfactant entities is dependent on cross-linker concentration and chain length. The Cukier hydrodynamic model and the free volume theory as modified by Peppas and Reinhart were applied to explain the dependence of the diffusion coefficients of surfactant on surfactant concentration inside the hydrogel. The hydrodynamic model was applied with success to the more hydrophilic surfactant, sodium 1-octanesulfonate, showing that the diffusion coefficients, D, increase when the resistance to hydrodynamic medium decreases; when the surfactant chain length increases (sodium dodecyl sulfate and sodium 1-hexadecane sulphonate) the variation of D with the free volume can only be understood considering the sieving effect produced by the surfactant inside gel.     

Transport properties of the Lorentz gas: Fourier's law

We investigate the stationary nonequilibrium (heat transporting) states of the Lorentz gas. This is a gas of classical point particles moving in a region gL containing also fixed (hard sphere) scatterers of radiusR. The stationary state considered is obtained by imposing stochastic boundary conditions at the top and bottom of , i.e., a particle hitting one of these walls comes off with a velocity distribution corresponding to temperaturesT ₁ andT ₂ respectively,T ₁ <T ₂. Letting be the average density of the randomly distributed scatterers we show that in the Boltzmann-Grad limit,,R 0 with the mean free path fixed, the stationary distribution of the Lorentz gas converges in theL ¹-norm to the stationary distribution of the corresponding linear Boltzmann equation with the same boundary conditions. In particular, the steady state heat flow in the Lorentz gas converges to that of the linear Boltzmann equation, which is known to behave as (T ₂-T ₁)/L for largeL, whereL is the distance from the bottom to the top wall: i.e., Fourier's law of heat conduction is valid in the limit. The heat flow converges even in probability. Generalizations of our result for scatterers with a smooth potential as well as the related diffusion problem are discussed.Research supported in part by NSF Grant no. Phy 77-22302.On leave of absence from the Fachbereich Physik der Universität, München. Work supported by a DFG fellowship.     

Freezing points,osmotic coefficients,and activity coefficients of some salts in ethylene carbonate: A high dielectric constant solvent without hydrogen bonding

The freezing points, conductivities, and densities of NaI, KI, CsI, Bu₄NCl, Bu₄NBr, Bu₄NI, Et₄NBr, and Pr₄NBr (where Et = ethyl, Pr = propyl, and Bu =n-butyl) in ethylene carbonate have been measured. Osmotic and activity coefficients were calculated from the results. All of the salts studied are strong electrolytes. The trends in the osmotic coefficients of the alkali metal iodides are NaI>KI>CsI, showing that Na⁺ is more solvated by ethylene carbonate than Cs⁺. For the tetraalkylammonium halides, the order of osmotic coefficients are Et₄NBrPr₄NBrBu₄NCl>Bu₄NBr>Bu₄NI. This is the same order as observed in two other high-dielectric-constant solvents, water andN-methylacetamide. The results indicate that the smaller anions are more solvated than the larger anions in ethylene carbonate in contrast to the usual behavior of dipolar aprotic (basic) solvents, such as dimethyl sulfoxide.     

Re-Evaluation of the Activity Coefficients of Aqueous Hydrochloric Acid Solutions up to a Molality of 2.0 Using Two-Parameter Hückel and Pitzer Equations. Part II. Results from 0 to 95°C

Simple two-parameter Hückel and Pitzer equations were used for the calculation of the activity coefficients of aqueous hydrochloric acid at temperatures 0–60°C up to a molality of 2.0 mol-kg^–1. The data obtained by Harned and Ehlers^(2,3) on galvanic cells without a liquid junction were used in the parameter estimations of these equations. These data consist of sets of measurements at the temperature intervals of 5°C. It was observed that all estimated parameters follow very simple equations with respect to temperature. They are either constant or depend linearly on the temperature. The values for the activity coefficient parameters calculated by these simple equations are recommended here. The recommended parameter values were tested by predicting the data of Gupta, Hills, and Ives,⁽⁵⁾ consisting of cell measurements from 5 to 45°C and molalities up to 1.0 mol-kg^–1, and the data of Bates and Bower,⁽⁴⁾ which extend to 95°C but measurements were only made on molalities less than about 0.1 mol-kg^–1. The activity coefficients obtained by the new equations were also compared to those calculated by the Pitzer equations with the parameter values determined by Saluja, Pitzer, and Phutela⁽⁶⁾ from calorimetric data. The agreement observed was excellent up to a molality of 1.5 mol-kg^–1 at temperatures from 0 to 60°C.     

Organomineral sorbents based on clinoptilolite-containing tuffs

The anion-exchange properties of a new organomineral sorbent obtained by modification of clinoptilolite-containing tuffs by polyhexamethyleneguanidine have been studied after different periods of storage (time after synthesis) and numbers of sorption-regeneration cycles. The sorbent can be used as a cation- and an anion-exchanger simultaneously. Selectivity coefficients (exchange constants) for F^–, SO₄ ^2–, and HPO₄ ^2– ionsvs. Cl^– ions on modified clinoptilolite-containing tuffs have been determined. The modification improves the mechanical properties of clinoptilolite tuffs.For part 1, see Ref. 1.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1554–1556, September, 1994.     

Prediction of soil organic carbon partition coefficients by soil column liquid chromatography

To avoid the limitation of the widely used prediction methods of soil organic carbon partition coefficients (KOC) from hydrophobic parameters, e.g., the n-octanol/water partition coefficients (KOW) and the reversed phase high performance liquid chromatographic (RP-HPLC) retention factors, the soil column liquid chromatographic (SCLC) method was developed for KOC prediction. The real soils were used as the packing materials of RP-HPLC columns, and the correlations between the retention factors of organic compounds on soil columns (ksoil) and KOC measured by batch equilibrium method were studied. Good correlations were achieved between ksoil and KOC for three types of soils with different properties. All the square of the correlation coefficients (R2) of the linear regression between log ksoil and log KOC were higher than 0.89 with standard deviations of less than 0.21. In addition, the prediction of KOC from KOW and the RP-HPLC retention factors on cyanopropyl (CN) stationary phase (kCN) was comparatively evaluated for the three types of soils. The results show that the prediction of KOC from kCN and KOW is only applicable to some specific types of soils. The results obtained in the present study proved that the SCLC method is appropriate for the KOC prediction for different types of soils, however the applicability of using hydrophobic parameters to predict KOC largely depends on the properties of soil concerned.     

298.15K下Li2B4O7-H2O体系水蒸汽分压及渗透系数的等压测定和离子相互作用模型

在已有研究含硼体系的文献中仅考虑了硼酸根B4O7^-2或B(OH)4^-和H3BO3的存在，而对Li2B4O7-H2O体系具有多种硼物种聚合平衡体系的热力学性质的研究尚未见报道．本文用等压法研究了Li2B4O7-H2O体系于298．15K下浓度由稀到过饱和溶液的平衡气相蒸汽压及渗透系数．考虑了水溶液中多种硼物种的存在，以Pitzer方程为基础，建立了可描述该含硼体系的离子相互作用模型。     

Temperature Dependence of the Solubility of Acetaminophen in Propylene Glycol + Ethanol Mixtures

The thermodynamic functions Gibbs energy, enthalpy and entropy of solution, mixing and solvation of acetaminophen in propylene glycol (PG) + ethanol (EtOH) cosolvent mixtures were evaluated from solubility data measured at several temperatures, using the van't Hoff and Gibbs equations. The solubility was greater at 50% m/m of PG at 20.0^C, while it was greater at 80% of PG at 40.0 ^C where m/m refers to mass percent. The solvation of this drug is appreciably greater in the mixtures than in the pure solvents. By means of an enthalpy–entropy compensation analysis, complex behavior was found for the solution. From 0 up to 20% of PG and from 60 up to 100% of PG the solution process is enthalpy driven, whereas from 20 up to 60% of PG it is entropy driven. These facts can be explained in terms of a decrease in the energy required for cavity formation in the solvent for mixtures containing 20–60% of PG.