Flow past a cylinder: shear layer instability and drag crisis

Flow past a circular cylinder for Re=100 to 10⁷ is studied numerically by solving the unsteady incompressible two‐dimensional Navier–Stokes equations via a stabilized finite element formulation. It is well known that beyond Re ～ 200 the flow develops significant three‐dimensional features. Therefore, two‐dimensional computations are expected to fall well short of predicting the flow accurately at high Re. It is fairly well accepted that the shear layer instability is primarily a two‐dimensional phenomenon. The frequency of the shear layer vortices, from the present computations, agree quite well with the Re^0.67 variation observed by other researchers from experimental measurements. The main objective of this paper is to investigate a possible relationship between the drag crisis (sudden loss of drag at Re ～ 2 × 10⁵) and the instability of the separated shear layer. As Re is increased the transition point of shear layer, beyond which it is unstable, moves upstream. At the critical Reynolds number the transition point is located very close to the point of flow separation. As a result, the shear layer eddies cause mixing of the flow in the boundary layer. This energizes the boundary layer and leads to its reattachment. The delay in flow separation is associated with narrowing of wake, increase in Reynolds shear stress near the shoulder of the cylinder and a significant reduction in the drag and base suction coefficients. The spatial and temporal power spectra for the kinetic energy of the Re=10⁶ flow are computed. As in two‐dimensional isotropic turbulence, E(k) varies as k^?5/3 for wavenumbers higher than energy injection scale and as k^?3 for lower wavenumbers. The present computations suggest that the shear layer vortices play a major role in the transition of boundary layer from laminar to turbulent state. Copyright © 2004 John Wiley & Sons, Ltd.     

On Efficient Computation of the Optimization Problem Arising in the Inverse Modeling of Non-Stationary Multiphase Multicomponent Flow Through Porous Media

In this paper we discuss a method of solving inverse problems in non-isothermal multiphase multicomponent flow through porous media. The conceptual model is described by a system of non-linear partial differential equations which involve unknown parameters. These parameters are to be determined using a set of observations at discrete points in space and time by an optimization method. It is based on a reduced Gauss-Newton iteration in combination with an efficient gradient computation which takes advantage of a recently developed efficient numerical simulation technique. A sensitivity analysis is carried out for the optimum parameter set. Numerical experiments are performed for a one dimensional column experiment carried out at the VEGAS, University of Stuttgart, Germany.     

Copper-mediated N- and O-arylations with arylboronic acids in a continuous flow microreactor: a new avenue for efficient scalability

A continuous flow procedure has been elaborated for the copper(II)-mediated N- and O-arylation of a range of compounds with arylboronic acids using a commercial microreactor setup. The compounds could be continuously generated in good yields paving the way for efficient scalability.     

基于分时原理的多相流体比例分配方法

提出了从“时间”上对多相流进行分配的新思路,分析了分时分配的基本原理,并设计了具体的实现方式。在空气-水实验回路上对分时分配装置进行了实验研究和验证。分时分配的基本原理就是通过“分时”的方法,使整个分配器“空间”内的多相流都能按照给定的时间份额周期性地交替流向对应的支路,从而保证各支路内的多相流具有高度一致的相含量和确定的流量比例。实验研究证明,分时分配法具有切实的可行性,分流比等于分时比且与流量和流体的物性无关,仅取决于分配器的几何参数。     

两同心球间旋转流动类Lorenz方程组的静态分歧

对同心球间旋转流动的N av ier-S tokes方程谱展开后进行三模态截断,讨论了所得到的类Lorenz型方程组的分歧问题.给出了静态奇异点的条件,并计算出解分支.首先,简要介绍了Lorenz方程组以及用Lorenz截断法讨论非线性问题的意义,其次,推导同心球间旋转流动N av ier-S tokes方程的流函数-涡度形式,最后,讨论同心球间旋转流动的类Lorenz型方程组的分歧问题.     

Determining optimal lot size for a two-warehouse system with deterioration and shortages using net present value

In this paper, we develop a deterministic inventory model for deteriorating items with two warehouses by minimizing the net present value of the total cost. Deterioration rates of items in the two warehouses may be different. In addition, we allow for shortages and complete backlogging. We then prove that the optimal replenishment policy not only exists but also is unique under some condition. Further, the result reveals that the reorder interval based on the average total cost, if it exists, must be longer than that derived using net present value. Finally, we use Yang’s [H.L. Yang, European Journal of Operational Research 157 (2004) 344–356] numerical example to illustrate the model and conclude the paper with suggestions for possible future research.     

The Gradient Flow of <Emphasis Type="Italic">∫</Emphasis><Subscript><Emphasis Type="Italic">M</Emphasis></Subscript>|Rm|<Superscript>2</Superscript>

We study the gradient flow of the Riemannian functional ℱ(g):=∫ _M |Rm|². This flow corresponds to a fourth-order degenerate parabolic equation for a Riemannian metric. We prove that the degeneracies may be accounted for entirely by diffeomorphism flow, and hence we show short-time existence using the DeTurck method. We prove L ² derivative estimates of Bernstein-Bando-Shi type and use these to give a basic obstruction to long time existence and prove a compactness theorem.      

Experimental study on turbulent features in the negative transport region of asymmetric plane channel flow

Turbulent features of streamwise and vertical components of velocity in the negative transport region of asymmetric plane channel flow have been studied experimentally in details. Experiments show that turbulent fluctuations in negative transport region are suppressed, and their probability distributions are far from Gaussian. Besides, the skewness factors attain their negative maxima at the position of the maximum mean velocity, whereas the flatness factors attain their positive maxima at the same position. The project supported by the National Natural Science Foundation of China (19872043)     

The discontinuous profile method for simulating two‐phase flow in pipes using the single component approximation

Godunov‐type algorithms are very attractive for the numerical solution of discontinuous flows. The reconstruction of the profile inside the cells is crucial to scheme performance. The non‐linear generalization of the discontinuous profile method (DPM) presented here for the modelling of two‐phase flow in pipes uses a discontinuous reconstruction in order to capture shocks more efficiently than schemes using continuous functions. The reconstructed profile is used to define the Riemann problem at cell interfaces by averaging of the components of the variable in the base of eigenvectors over their domain of dependence. Intercell fluxes are computed by solving the Riemann problem with an approximate‐state solver. The adapted treatment of boundary conditions is essential to ensure the quality of the computational results and a specific procedure using virtual cells at both extremities of the computational domain is required. Internal boundary conditions can be treated in the same way as external ones. Application of the DPM to test cases is shown to improve the quality of computational results significantly. Copyright © 2001 John Wiley & Sons, Ltd.