Synthesis and characterization of oligo-4-[(pyridin-3-ylimino)methyl]phenol

The oxidative polycondensation of 4-[(pyridin-3-ylimino)methyl]phenol (4-PIMP) with O₂, H₂O₂, and NaOCl was studied in an aqueous alkaline medium between 50°C and 90°C. Oligo-4-[(pyridin-3-ylimino)methyl]phenol (O-4-PIMP) prepared was characterized by ¹H-NMR, ¹³C-NMR, FT-IR, UV-VIS, size-exclusion chromatography, and elemental and thermal analyses techniques. At the optimum reaction conditions, the yield of O-4-PIMP was 18.9%, 39.4%, and 46.8% using H₂O₂, O₂, and NaOCl oxidant, respectively. According to the TG analysis, the initial degradation temperature of O-4-PIMP was 218°C, which was by 50°C higher than that of 4-PIMP. Thermal analyses of 4-PIMP and O-4-PIMP were carried out in N₂ atmosphere at 15–1000°C. The highest occupied molecular orbital, the lowest unoccupied molecular orbital, and electrochemical energy gaps of 4-PIMP and O-4-PIMP were determined from the onset potentials for n-doping and p-doping, respectively. Also, optical band gaps of 4-PIMP and O-4-PIMP were determined according to UV-VIS measurements.     

Preparation of Polycrystalline Antimonic Acid Films by Electrophoretic Deposition

Cubic antimonic acid (Sb₂O₅·nH₂O) films were successfully prepared on stainless steel and Si(100) substrates by electrophoretic deposition (EPD) using two types of sols. The sols were prepared by reacting an H₂O₂ aqueous solution with Sb(O-i-C₃H₇)₃ or metallic Sb powder. The resulting films were found to consist of fine particles of cubic Sb₂O₅·nH₂O single crystals with uniform particle sizes of 30 nm and 150 nm. The weight of the Sb₂O₅·nH₂O deposit on the anode Si(100) substrate by EPD increased linearly with the current density in the range of 0–0.67 mA cm^–2, when the sol pH was over 7. The proton conductivity of the polycrystalline Sb₂O₅·nH₂O discs, formed from the two types of sols, was evaluated by an ac impedance method at room temperature under controlled levels of relative humidity.     

Synthesis of a new donor, BEDT-HBDST and crystal structures, electrical and magnetic properties of (BEDT-HBDST)2MX4 (M=Fe, Ga, X=Cl, Br), where BEDT-HBDST=2,5-bis(4,5-ethylenedithio-1,3-diselenol-2-ylidene)-2,3,4,5-tetrahydrothiophene

A novel conjugation-elongated bis(ethylenedithio)tetraselenafulvalene (BETS) type donor, 2,5-bis(4,5-ethylenedithio-1,3-diselenol-2-ylidene)-2,3,4,5-tetrahydrothiophene (BEDT-HBDST) and its magnetic and non-magnetic anion salts, (BEDT-HBDST)₂MX₄ (MX₄⁻=FeCl₄⁻, GaCl₄⁻, FeBr₄⁻ and GaBr₄⁻), were prepared. These four salts are isostructural and belong to the space group of P2/c. They showed semiconducting behavior with small activation energies (59-64 meV). The band structures of these salts are quasi one-dimensional and there is a midgap between the upper band and the lower band, since the degree of dimerization is significant in the stacking direction. The MX₄⁻ ions are located between the donor columns and near to the ethylenedithio moieties of the donor molecules. The magnetic susceptibilities of the FeCl₄⁻ and FeBr₄⁻ salts follow the Curie-Weiss law with Curie constants of 4.6 and 4.8 emu K mol⁻¹ (sum of the spins of S=5/2 and S=1/2) and negative Weiss temperatures of θ=−1.2 and −4.9 K, respectively, revealing a weak antiferromagnetic interaction of 3d spins of the FeCl₄⁻ and FeBr₄⁻ anions. The Fe?Fe (6.66-7.60 Å), Cl?Cl (4.81-4.82 Å) and Br?Br (4.74-4.77 Å) distances in the crystal structures of these salts are significantly long. Therefore, the direct magnetic interaction between the 3d spins of the nearest neighboring Fe³⁺ ions appears to be not readily accessible.     

New organic metals: Radical cation salts of bis(ethylenedioxo)tetrathiafulvalene with halide mercurate anions

Radical cation salts with halide mercurate anions were obtained by the electrochemical oxidation of bis(ethylenedioxo)tetrathiafulvalene (BEDO-TTF), and their conductivity was studied. The compounds (BEDO-TTF)₄Hg₃X₈ (X = Cl or Br), (BEDO-TTF)₄Hg_3.5I₉, and (BEDO-TTF)₂HgBr₃ possess the conductivity of the metallic type down to helium temperatures.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 1167–1170, May, 1996.     

Neue schnelle Ionenleiter vom Typ MMIIICl6 (MI = Li,Na, Ag; MIII = In,Y)

Novel Fast Ion Conductors of the Type M M^IIICl₆ (M^I = Li, Na, Ag; M^III = In, Y) The ternary chlorides Li₃InCl₆, Na₃InCl₆, Ag₃InCl₆, and Li₃YCl₆ have been studied by difference scanning calorimetry, high-temperature X-ray, infrared, and high-temperature Raman methods. Impedance spectroscopic measurements exhibit fast ionic conductivity increasing in the sequence Na₃InCl₆ < Li₃YCl₆ < Ag₃InCl₆ < Li₃InCl₆. In the range of 300°C, Li₃InCl₆ is the best lithium ion conductor known so far (σ = 0,2 Ω^?1 cm^?1 at 300°C). With the exception of Na₃InCl₆, the chlorides exhibit complicated order-disorder phase transitions.     

Insights on the origin of the structural phase transition in BaV10O15 from electronic structure calculations and the effect of Ti-doping on its structure and electrical transport properties

Band structure calculations at the level of LMTO-ASA provide insight into the electronic structure of BaV₁₀O₁₅ and the origin of the structural phase transition. A crystal orbital Hamiltonian population/integrated crystal orbital Hamiltonian population analysis provides evidence that the crystallographic phase transition is driven by V-V bond formation. As well, the energy bands near the Fermi level are very narrow, <1 eV, consistent with the fact that the observed insulating behavior can be due to electron localization via either Mott-Hubbard correlation and/or Anderson disorder. The partial solid solution, BaV_10−xTi_xO₁₅, was examined to study the effect of Ti-doping at the V sites on the structure and electronic transport properties. In spite of the non-existence of “BaTi₁₀O₁₅”, the limiting x=8, as indicated by a monotonic increase in the cell volume and systematic changes in properties. This limit may be due to the difficulty of stabilizing Ti²⁺ in this structure. For x=0.5 both the first order structural phase transition and the magnetic transition at 40 K are quenched. The samples obey the Curie-Weiss law to x=3 with nearly spin only effective moments along with θ values which range from −1090 K (x=0.5) to −1629 K (x=3). For x>3 a very large, ∼2×10⁻³ emu/mol, temperature independent (TIP) contribution dominates. Conductivity measurements on sintered, polycrystalline samples show semiconducting behavior for all compositions. Activation energies for Mott hopping derived from high temperature data range from ∼0.1 eV for x=0-1 and fall to a plateau of 0.06 eV for x=3-7. Low temperature data for x=3, 5 and 7 show evidence for Mott variable range hoping (VRH) with a T^1/4 law and in one case between 5 and 17 K, a Efros-Shklovskii correlated hopping, T^1/2 law, was seen, in sharp contrast to BaV₁₀O₁₅ where only the E-S law was observed up to 75 K. Seebeck coefficients are small (<35 μV/K), positive, roughly TIP and increase with increasing x up to x=5. This may point to a Heikes hopping of holes but a simple single carrier model is impossible. The compositions for x>3 are remarkable in that local moment behavior is lost, yet a metallic state is not reached. The failure of this system to be driven metallic even at such high doping levels is not fully understood but it seems clear that disorder induced carrier localization plays a major role.     

超支化聚氨酯固体电解质导电性能的光谱学研究

用超支化聚氨酯 +线性聚氨酯作为基体 ,LiClO4作为离子源制得聚合物固体电解质 .用Raman光谱 ,FTIR光谱等光谱学方法研究了聚合物电解质中盐离子和聚合物基团之间的相互作用 .研究表明超支化聚氨酯对盐有较好的溶解作用 .研究还表明超支化聚氨酯加入有利于提高体系的电导率     

从电子工业“脊梁”到全面开花的镓元素

镓是第一个根据化学元素周期律预言并在自然界中证实的元素，是室温下电导率和热导率均为最大的液态物质，镓在电子工业中得到了广泛应用，被誉为电子工业“脊梁”。近十几年来，镓的更多应用潜力被发掘出来，在电子工业、散热、增材制造、柔性机器、生物医学等领域均有重要的应用前景。     

凝胶型聚合物电解质的电导率与温度的关系

凝胶型聚合物电解质的电导率与温度的关系孙晓光，林云青，齐力，景遐斌，王佛松（中国科学院长春应用化学研究所长春１３００２２）关键词凝胶电解质，离子电导率，活化能无定形聚合物电解质电导与温度的依赖关系一般可用Ｖｏｇｅｌ－Ｔａｍｍａｎ－Ｆｕｌｃｈｅｒｃ（Ｖ...     

电场对含高氯酸锂盐的互穿网络高分子快离子导体的电导的影响

研究了直流电场对含ＬｉＣｌＯ４的聚氧化乙烯（ＰＥＯ）４００与环氧树脂形成的液晶态互穿网络高分子忆禽子导体的电导率的影响。在室温至９０℃范围内，电导率随外加电压增加面降低。外加电压越高，对电导率变化的影响越大。