Determination of crack growth kinetics in non-reinforced semi-crystalline thermoplastics using the linear elastic fracture mechanics (LEFM) approach

The aim of this study was to find a satisfactory method to characterize the fatigue crack growth behavior of non-reinforced, semi-crystalline thermoplastic polymers using linear elastic fracture mechanics (LEFM). For this, crack growth curves (crack length versus cycle number) as well as crack growth kinetics curves (crack growth rate da/dN versus amplitude stress intensity factor ΔK) had to be generated. As methods suggested by ISO 15850 and ASTM E 647-11 failed to provide satisfactory results for the crack growth curves, a more advanced method was searched for and finally found in the literature. Regarding the crack growth kinetics curve, the idea of the calculation was based on methods recommended in ISO 15850 and ASTM E 647-11. However, these methods had to be considerably modified and improved in order to get accurate results with little scatter. The whole methodology was developed and verified with fatigue crack growth tests on two semi-crystalline thermoplastics (polyoxymethylene POM and polyetheretherketone PEEK).     

Dynamic analysis on generalized linear elastic body subjected to large scale rigid rotations

The dynamic analysis of a generalized linear elastic body undergoing large rigid rotations is investigated. The generalized linear elastic body is described in kine-matics through translational and rot...     

Crystal structure of a cholesterol-based dimesogen

The title compound, cholesteryl 6[4-(4-pentyloxyphenylethynyl)phenoxy]hexanoate (DMT5), a cholesterol-based dimesogen, crystallizes in the monoclinic space group P2₁ with the parameters a = 9.812(3) Å, b = 9.713(2) Å, c = 24.179(2) Å, β = 92.48(1)° V = 2302.2(9) ų, Z = 2, F₀₀₀ = 836, λ(MoK_α) = 0.71069 Å, μ = 0.067 cm 1, final R = 0.0772. The structure has intermolecular hydrogen bonds; it is stabilized by the presence of intermolecular contacts whose spacings are less than van der Waals' radii.     

On the free vibration response of rectangular plates,partially supported on elastic foundation

Rectangular plates on distributed elastic foundations are widely employed in footings and raft foundations of variety of structures. In particular, mounted columns and single footings may partially occupy the rectangular plate of any kind.     

First-principles study of structural stability and elastic property of pre-perovskite PbTiO3

The structural stability and the elastic properties of a novel structure of lead titanate,which is named preperovskite PbTiO₃ （PP-PTO） and is constructed with TiO₆ octahedral columns arranged in a one-dimensional manner,are investigated by using first-principles calculations.PP-PTO is energetically unstable compared with conventional perovskite phases,however it is mechanically stable.The equilibrium transition pressures for changing from preperovskite to cubic and tetragonal phases are 0.5 GPa and 1.4 GPa,respectively,with first-order characteristics.Further,the differences in elastic properties between pre-perovskite and conventional perovskite phases are discussed for the covalent bonding network,which shows a highly anisotropic character in PP-PTO.This study provides a crucial insight into the structural stabilities of PP-PTO and conventional perovskite.     

Elastic Organic Crystals Based on Barbituric Derivative: Multi-faceted Bending and Flexible Optical Waveguide

Elastic organic single crystals with light-emitting and multi-faceted bending properties are extremely rare. They have potential application in optical materials and have attracted the extensive attention of researchers. In this paper, we reported a structurally simple barbituric derivative DBDT , which was easily crystallized and gained long needle-like crystals (centimeter-scale) in DCM/CH₃OH (v/v=2/8). Upon applying or removing the mechanical force, both the (100) and (040) faces of the needle-like crystal showed reversible bending behaviour, showing the nature of multi-faceted bending. The average hardness (H) and elastic modulus (E) were 0.28±0.01 GPa and 4.56±0.03 GPa for the (040) plane, respectively. Through the analysis of the single crystal data, it could be seen that the van der waals (C−H⋅⋅⋅π and C−H⋅⋅⋅C), H-bond (C−H⋅⋅⋅O) and π⋅⋅⋅π interactions between molecules were responsible for the generation of the crystal elasticity. Interestingly, elastic crystals exhibited optical waveguide characteristics in straight or bent state. The optical loss coefficients measured at 627 nm were 0.7 dBmm⁻¹ (straight state) and 0.9 dBmm⁻¹ (bent state), while the optical loss coefficient (α) were 1.5 dBmm⁻¹ (straight state) and 1.8 dBmm⁻¹ (bent state) at 567 nm. Notably, the elastic organic molecular crystal based on barbituric derivative could be used as the candidate for flexible optical devices.     

Variations of the elastic constants of InSb near the covalent-metallic transition

Abstract

The pulse-echo-overlap method was used to measure the longitudinal and transverse wave velocities in single-crystal (100) and (111) samples of InSb up to 3 GPa at room temperature. The peculiar variations of the elastic constants were observed near the covalent-metallic transition.     

Phase Stability and Elastic Properties of Chromium Borides with Various Stoichiometries

Phase stability is important to the application of materials. By first‐principles calculations, we establish the phase stability of chromium borides with various stoichiometries. Moreover, the phases of CrB₃ and CrB₄ have been predicted by using a newly developed particle swarm optimization (PSO) algorithm. Formation enthalpy–pressure diagrams reveal that the MoB‐type structure is more energetically favorable than the TiI‐type structure for CrB. For CrB₂, the WB₂‐type structure is preferred at zero pressure. The predicted new phase of CrB₃ belongs to the hexagonal P‐6m2 space group and it transforms into an orthorhombic phase as the pressure exceeds 93 GPa. The predicted CrB₄ (space group: Pnnm) phase is more energetically favorable than the previously proposed Immm structure. The mechanical and thermodynamic stabilities of predicted CrB₃ and CrB₄ are verified by the calculated elastic constants and formation enthalpies. The full phonon dispersion calculations confirm the dynamic stability of WB₂‐type CrB₂ and predicted CrB₃. The large shear moduli, large Young’s moduli, low Poisson ratios, and low bulk and shear modulus ratios of CrB₄? PS_C and CrB₄? PS_D indicate that they are potential hard materials. Analyses of Debye temperature, electronic localization function, and electronic structure provide further understanding of the chemical and physical properties of these borides.     

Skin Constituents as Cosmetic Ingredients. Part II: A Study of Bio‐Mimetic Monoglycerides Behavior at the Squalene‐Water Interface by the “Pendant Drop” Method in a Dynamic Mode

This work aims at presenting the viscoelastic behavior of bio‐mimetic monoglycerides used as emulsifier in a mixture made of two non‐miscible liquids, squalene and water. The measurement of the interfacial tension, carried out by the “pendant drop” method in “dynamic” mode, made it possible to characterize these amphiphilic molecules according to the value of their elastic modulus, ?, as well as their relaxation time, τ_R.

The analysis of these parameters, as well as those developed in the previous publication [L. Blasco et al. (2006) Skin constituents as cosmetic ingredients. Part I: A Study of bio‐mimetic monoglyceride behavior at the squalene‐water interface by the “pendant drop” method in a static mode. J. Dispers. Sci. Technol., 27(6).] shows that the hydrocarbon chain structure, such as its length, the presence of one or more unsaturations, hydroxyl function, affects the behavior of surfactant molecules at the squalene/water interface.     

Elastic,dielectric and optical constants of the nematic mixture E49

The Merck nematic mixture E49 exhibits a large nematic interval (0–100 °C) and a large dielectric anisotropy. Both of these features make E49 interesting for applications and basic physics. Unfortunately, no systematic measurements of the material constants of this mixture and their temperature dependence have been reported in the literature. In this paper we report experimental measurements of the splay and bend elastic constants (K ₁₁ and K ₃₃) of the ordinary and the extraordinary refractive indices (n _ort and n _par) at the wavelength λ?=?632.8 nm and of the two elastic constants parallel and orthogonal to the director (ε_par and ε_ort) at the frequency ν?=?5?kHz. The temperature dependence of all of these parameters is found in the temperature range 25–99 °C. The measurements of the elastic constants are performed using both a dielectric and an optical method simultaneously on the same nematic sample. The results obtained using the two methods are in a satisfactory agreement between them within the estimated experimental uncertainty. The ordinary and the extraordinary indices are measured using the prism method.