土工聚合物减小土体差异沉降的机理及最佳埋置深度的计算

以弹性理论为基础，分析讨论了利用土工聚合物减小土体差异沉降的机理和土工聚合物最佳埋置深度的确定方法．     

非线性粘弹性拟静态问题与非线性弹性静力问题对应原理

本文应用多重单边拉氏变换导出了非线性粘弹性拟静态问题与非线性弹性静力问题的对应关系,从而把过去认为只有线性条件下存在的粘弹性——弹性对应原理拓展到了非线性范畴     

Strain energy density of a circular cavity buried in semi-infinite functionally graded materials subjected to shear waves

In this paper, based on the theory of multiple scattering of elastic waves, employing wave functions expansion method, multiple scattering and strain energy density in semi-infinite functional graded materials with a circular cavity are investigated, the analytical solution of the problem is derived, and the numerical solution of the strain energy density factors around the cavity is also presented. The effects of the distance between the cavity and the edge of the materials, the wave number and the non-homogeneous parameter of materials on strain energy density factors are analyzed. From analysis, it can be seen that when the non-homogeneous parameter of materials is less than zero, it has less influence on the maximum strain energy density factor around the cavity; however, it has greater influence on the distribution of strain energy density factors around the cavity. When the non-homogeneous parameter of materials is greater than zero, it has greater influence on both the maximum strain energy density factor and the distribution of strain energy density factor around the cavity, especially in the case that the distance between the cavity and the edge is comparatively little.     

BENDING SOLUTION OF A RECTANGULAR PLATE WITH ONE EDGE BUILT－IN AND ONE CORNER POINT SUPPORTED SUBJECTED TO UNIFORM LOAD

ＢＥＮＤＩＮＧ　ＳＯＬＵＴＩＯＮ　ＯＦ　Ａ　ＲＥＣＴＡＮＧＵＬＡＲ　ＰＬＡＴＥ　ＷＩＴＨ　ＯＮＥ　ＥＤＧＥ　ＢＵＩＬＴ－ＩＮ　ＡＮＤ　ＯＮＥ　ＣＯＲＮＥＲ　ＰＯＩＮＴ　ＳＵＰＰＯＲＴＥＤ　ＳＵＢＪＥＣＴＥＤ　ＴＯ　ＵＮＩＦＯＲＭ　ＬＯＡＤＸｕＱｉｌｏ...     

On Thermal Contact of Two Axially Symmetric Elastic Solids

A contact problem of two elastic convex and axially symmetric solids heated (or cooled) to temperatures of different values is considered. Pertinent formulae have been derived for relations between the contact pressure, geometrical characteristics of the solids and distributions of heat flux over the contacting region. We have analysed: 1. The problem of the loss of the contact between two solids pressed together with active heat fluxes. We discuss the cases for which the contact of the axially symmetric solids can take the form of a circle, or an annulus. 2. The problem of a paradox when the mathematically well posed contact problem of thermoelasticity leads to a physically unacceptable solution with a region of overlapping materials. Here we discuss a generalization of the cooled sphere paradox. The heat flux functions are continuously differentiable, of constant sign. The conditions have been derived for the cases when the paradox can be avoided.     

Integration of an Equilibrium System in an Enhanced Theory of Bending of Elastic Plates

The complete integral of the system of partial differential equations governing the equilibrium bending of elastic plates with transverse shear deformation and transverse normal strain is constructed by means of complex variable methods. The process helps to elucidate the physical meaning of certain analytic constraints imposed on the asymptotic behavior of the solutions and shows that in the case of an infinite plate, any analytic solution has finite energy if and only if the bending and twisting moments, the transverse shear force, the displacements in vertical planes, and two other characteristic quantities vanish at infinity. An example is discussed to illustrate the theory.     

Action of a Periodic Load on an Elastic Floating Plate

The problem of the behavior of an elastic floating plate in the form of a strip under the action of a periodic surface load is solved using the Wiener-Hopf technique. The shortwave approximation is found in explicit form. The effect of the frequency and nature of the acting load on the vibration amplitudes of the fluid and the plate is investigated numerically. It is found that for certain loads no waves propagate in the fluid and the vibrations of the plate are localized in the neighborhood of the acting load. Conditions under which local vibration can be realized are found.__________Translated from Izvestiya Rossiiskoi Academii Nauk, Mekhanika Zhidkosti i Gaza, No. 2, 2005, pp. 132–146.Original Russian Text Copyright © 2005 by Tkacheva.     

Two-dimensional problem of periodic loading of an elastic plate floating on the surface of an infinitely deep fluid

The action of external periodic pressure on an elastic plate floating on the surface of a fluid assumed to be ideal and incompressible is examined by the method of normal modes in the linear formulation. The behavior of the matrix of coefficients of the hydrodynamic load on the plate is considered in detail for different frequencies. The behavior of the plate under localized periodic loading is compared for the cases of a heavy fluid with a finite or infinite depth and for a weightless infinite-depth fluid. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 46, No. 3, pp. 61–72, May–June, 2005.     

A PREDICTIVE APPROACH TO THE IN-PLANE MECHANICAL PROPERTIES OF STITCHED COMPOSITE LAMINATES

This contribution attempts to model the alteration of the in-plane elastic properties in laminates caused by stitching,and to predict the in-plane effective tensile strength of the stitched composite laminates.The distortion of in-plane fibers is considered to be the main cause that affects the in-plane mechanical properties.A fiber distortion model is proposed to characterize the fiber misalignment and the fiber content concentration due to stitching.The undistorted region,the fiber distortion region,the resin-rich pocket and the through-thickness reinforcement section are taken into account.The fiber misalignment and inhomogeneous fiber content due to stitching have been formulated by introducing two parameters,the distortion width and maximum misalignment.It has been found that the ply stress concentration in stitched laminates is influenced by the two concurrent factors,the stitch hole and inhomogeneous fiber content.The stitch hole brings about the stress concentration whereas the higher fiber content at the local region induced by stitching restrains the local deformation of the composite.The model is used to predict the tensile strength of the [0/45/0/-45/90/45/0/-45]_(2s) T300/QY9512 composite laminate stitched by Kevlar 29 yarn with different stitching configurations,showing an acceptable agreement with experimental data.