确定SHPB实验中延迟时间的曲线拟合法

 利用已知的试件密度，用预估的透射波与实测的透射波进行早期形状比较，确定试件弹性波速度，进而确定了SHPB试验数据处理时的延迟时间。     

Probing proton halo of the exotic nucleus28S by elastic electron scattering

Elastic electron scattering on the exotic light nucleus²⁸S is investigated in the plane wave Born approximation. The variation of the squared form factors of²⁸S with momentum transfer is compared with that of³²S. It is found that the behavior of the form factors near the second minimum (with a moderate momentum transfer) is sensitive to the alteration of the charge density distribution of halo protons in²⁸S. This indicates that elastic electron scattering can be a good probe of the structure of proton-halo nuclei.     

Collective bounce-off phenomenon in139La+Ag(Br) reaction at 1.1 A GeV energy

Out of a total statistics of 896¹³⁹La+Ag(Br) interactions, 128 interactions having multiplicity of target fragments (Z⩾1)⩾8 and projectile fragments (Z⩾2)⩾4 have been selected. They correspond to quasi-peripheral interactions. Azimuthal angle correlation between sources of target fragments (TFs) and projectile fragments (PFs) shows the existence of bounce-off effect. Using data of La+Ag(Br) and⁸⁴Kr+Ag(Br) reactions it is shown that individual helium [Z=2, PFs] and heavier fragment [Z⩾3, PFs] show different emission characteristics. Further, a two prong correlation functionT(Φ _ij ) plotted for heavier fragments and helium fragments separately, indicates the possibility of existence of different physical conditions. This observation is supported by the different momentum widths of helium fragments and heavier fragments. From the momentum width data of Kr+Ag(Br) reactions normalized density comes out to be ≈4.7. Using quasi-elastic kinematics for the bounce-off nuclei, the excitation energy has been computed from the experimental data of flow angles. The strength of bounce-off seems to decrease with the increase of excitation energy or temperature.     

一些高Tc超导体的弹性性质

 本文用超声相比较方法测定了高T_c超导体La_1.85Sr_0.15CuO₄，La₂CuO₄和YBa₂Cu₃O₇的纵波和横波声速，进而导出了它们的纵向模量、切变模量、杨氏模量、泊松比、德拜温度及定体比热。在La_1.85Sr_0.15CuO₄样品上，还进行了压力实验，发现所有弹性模量都是随压强增加而增加。定体比热c_V和泊松比σ在高压下则略有下降。德拜温度是随压强增加而增加的。     

Experimental investigation of the aquatic propulsion caused by localised flexural wave propagation in immersed wedges and plates

This paper describes the results of the experimental verification of the idea of wave-like aquatic propulsion of autonomous and man-inhabited vessels first published about 10 years ago by one of the present authors (V.V.K.). The idea is based on employing the unique type of localised flexural elastic waves propagating along edges of wedge-like structures immersed in water (wedge elastic waves). Such wedge-like structures supporting localised elastic waves can be attached like fish fins to a body of a small ship or a submarine and used for their propulsion. The proposed principle of employing localised flexural waves as a source of aquatic propulsion has been biologically inspired by the specific swimming mode used in nature by stingrays. To verify the idea experimentally, the first working prototype of a small catamaran using the above-mentioned wave-like propulsion via the attached rubber keel has been build and tested in Loughborough University. The tests have been carried out in two phases, in a water tank and then in open water. The test results have shown that the catamaran was propelled very efficiently and could achieve the speed of 36 cm/s, i.e., about one vehicle length per second, thus demonstrating that the idea of wave-like propulsion of small man-inhabited craft is viable. The reported proof of the viability of this idea may open new opportunities for marine craft propulsion, which can have far reaching implications.     

钛合金（TC-6）二阶和三阶弹性常数

 用脉冲回波重叠法测量了钛合金（TC-6）的二阶、三阶弹性常数。实验中发现dμ/dp<0（p<0.17 GPa）,dμ/dp>0（p>0.17 GPa）。     

量化方法研究分子结BEMP和TEMP的电子输运特性

通过结合杂化密度泛函和前线轨道理论与弹性散射格林函数方法研究了BE- MP(benzene-1,4-di-ethynyl-4-mercaptophenyl)和TEMP(thiophene-2,5-di-ethynyl-4- mercaptophenyl)两分子结的输运性质。基于杂化密度泛函方法计算两扩展分子电子结构的基础上,计算了两分子的输运性质．计算结果显示:电流增加来源于电极和分子轨道的共振;电导曲线呈现出平台特征．在此基础上从扩展分子A(Au-BEMP-Au)中间的苯环的旋转而引起电流减小的角度解释了负微分电阻现象．     

Peculiarities of changes of some physicomechanical characteristics of monoisotopes B, B and natural β-boron

Real structure and some physicomechanical characteristics of the samples of natural beta-rhombohedral boron B as well as of its ¹⁰B and ¹¹B monoisotopes have been studied. It was shown that the influence of ¹⁰B and ¹¹B isotopes on physicomechanical properties of boron had a different character. In particular, the samples enriched with ¹¹B had high values of microhardness, shear modulus (SM) and elastic limit if compared to those of boron, while the samples enriched with ¹⁰B monoisotopes were characterized with high values of thermal expansion coefficient (TEC) and thermal conductivity; lattice parameters a and c increased by the sequence: ¹¹B, B, ¹⁰B. It was established that TEC, thermal conductivity, microhardness, SM and shear elastic limit increased in all samples at annealing for 5 h at 1500 °C regardless of isotope content.     

Elastic Moduli and Activation Energies for an Epoxy/m-XDA System by DMA and DSC

The influence of the resin/diamine ratio on the properties of the system diglycidyl ether of bisphenol A (BADGE n=0/m-xylylenediamine) (m-XDA) was studied. Variation of this ratio resulted in significant effects on the cure kinetics and final dynamic mechanical properties of the product material. The study was made in terms of storage modulus (E′), vss modulus (E″) and molecular mass between cross-links (M_c) at different ratios. Two geometries (cylindrical and rectangular) were considered. The influence of temperature was studied through the activation energy (E_a>), which depends on the epoxy/amine ratio and the geometry of the samples. Glass transition temperatures (T_g>) and glass transition temperatures for thermosets with null degree of conversion (T_go>) were determined by DSC. T_g> decreases when amounts of curing agent greatly in excess of the stoichiometric composition were used. This revised version was published online in July 2006 with corrections to the Cover Date.     

Atom-surface elastic scattering in the presence of laser radiation

A qualitative discussion on atom-surface elastic scattering taking place in the presence of laser radiation is given. It is suggested that appreciable effects of laser radiation on diffraction patterns may be expected if the laser radiation is capable of inducing electronic transitions in atoms with a large probability.Research sponsored by the Air Force Office of Scientific Research (AFSC), United States Air Force, under Contract No. F49620-78-C-0005, and the National Science Foundation under Grant No. CHE77-27826. The United States Government is authorized to reproduce and distribute reprints for governmental purposes notwithstanding any copyright notation hereon.Alfred P. Sloan Research Fellow, 1976–1980; Camille and Henry Dreyfus Teacher-Scholar, 1975–1980.