An approximation property of harmonic functions in Lipschitz domains and some of its consequences

An extension of an inequality of J. B. Garnett (1979), with improvements by B. E. J. Dahlberg (1980), on an approximation property of harmonic functions is proved. The weighted inequality proved here was suggested by the work of J. Pipher (1993) and it implies an extension of a result of S. Y. A. Chang, J. Wilson and T. Wolff (1985) and C. Sweezy (1991) on exponential square integrability of the boundary values of solutions to second-order linear differential equations in divergence form. This implies a solution of a problem left open by R. Bañuelos and C. N. Moore (1989) on sharp estimates for the area integral of harmonic functions in Lipschitz domains.

     

Molar extinction coefficients of solutions of some organic compounds

Molar extinction coefficients of aqueous solutions of some organic compounds, viz. formamide (CH₃NO),N-methylformamide (C₂H₅NO),NN-dimethylformamide (C₃H₇NO),NN-dimethylacetamide (C₄H₉NO), 1,4-dioxane (C₄H₈O₂₄), succinimide (C₄H₅NO₂) and solutions of acetamide (C₂H₅NO) and benzoic acid (C₇H₆O₂) in 1,4-dioxane (C₄H₈O₂) have been determined by narrow beam γ-ray transmission method at 81, 356, 511, 662, 1173 and 1332 keV. The experimental values of mass attenuation coefficients of these compounds have been used to calculate effective atomic numbers and electron densities. The additivity rule earlier used for aqueous solution has been extended to non-aqueous (1,4-dioxane) solutions.     

10瓦级双包层光纤激光器

考虑到所用大功率激光二极管的光谱特性，对光纤激光器的基本法布里-珀罗腔型稍加改变，研制出激光二极管抽运的10w级双包层光纤激光器，获得最高功率为11．8w、波长1100mm的单模激光输出。     

基于积分方法的二维平行剪切层声远场预测

本文采用二维Ffowcs Williams＆Hawkings(FW-H)方程对平行剪切层远声场辐射特性进行了研究。近流场时间精确数据通过计算气动声学(Computational Aeroacoustics,CAA)技术数值模拟获得,声远场信息则通过FW-H方程对近流场内的可穿透积分面进行积分获得。该方法首先采用具有解析解的涡/尾缘干涉问题进行了校核,进一步采用CAA/FW-H匹配技术对二维平行剪切层声辐射问题进行了预测,计算结果表明,积分解与计算域内的CAA数值解吻合较好。     

A saxpy formulation for plane rotations

An algorithm for pre- or post-multiplication of a matrix by a plane rotation, using only three vector saxpy operations instead of the four vector operations usually considered necessary, is described. No auxiliary storage for overwriting is required. The method is shown to be numerically stable.     

Statistical approach to light scattering from deformed textured heterogeneous polymer materials

A statistical theory of light scattering from deformed isotropic and textured heterogeneous polymer materials is formulated. Two types of textured structures are analyzed: assemblies of optically isotropic and anisotropic rods and a spatially anisotropic distribution of isotropic spherical inclusion centers. The small-angle H_v light-scattering patterns are calculated. The appearance of scattering from isotropic rods and spheres in deformed materials has been demonstrated. The changes of the H_v scattering patterns as a function of elongation and strucuture parameters are discussed. © 1993 John Wiley & Sons, Inc.     

Number albedo measurements from stratified layers of iron,concrete and aluminium

A layer of stratified combination composed of selected radiation shielding materials acquires better shielding property. Albedo is used in such measurements as an integral measure ofγ-ray scattering. The stratified slabs of alternating heterogeneous layers have been found to have a virtual homogeneous property with a definite effective atomic number. The angular distribution of back-scattered photons as well as the total number albedo values for iron, aluminium and concrete in stratified combination for 662 keV and 1250 keV photons are reported.     

Orientation and relaxation of polymer–clay solutions studied by rheology and small-angle neutron scattering

The influence of shear on viscoelastic solutions of poly(ethylene oxide) (PEO) and clay [montmorillonite, i.e., Cloisite NA+ (CNA)] was investigated with rheology and small-angle neutron scattering (SANS). The steady-state viscosity and SANS were used to measure the shear-induced orientation and relaxation of the polymer and clay platelets. Anisotropic scattering patterns developed at much lower shear rates than in pure clay solutions. The scattering anisotropy saturated at low shear rates, and the CNA clay platelets aligned with the flow, with the surface normal parallel to the gradient direction. The cessation of shear led to partial and slow randomization of the CNA platelets, whereas extremely fast relaxation was observed for laponite (LRD) platelets. These PEO–CNA networklike solutions were compared with previously reported PEO–LRD networks, and the differences and similarities, with respect to the shear orientation, relaxation, and polymer–clay interactions, were examined. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3102–3112, 2004     

Ferromagnetic Properties of Bond-Dilution and Random Positive or Negative Uniaxial Anisotropy Blume-Capel Model

We study the ferromagnetic properties of spin-1 system, which is considered in the frame of the bond dilution and random positive or negative anisotropy Blume-Capel model in the effective field theory and a cutting approximation. The investigation of phase diagrams displays some rich properties of the trajectory of tricritical point, reentrant henomena at low temperatures. Under certain both bond concentrations and random negative anisotropy, there are new transition lines of double tricritical points. So special emphasis is placed on the influence of the bond dilution and random anisotropy on phase diagrams. The magnetizations of the system are also discussed. Some results have not been evealed in previous reports.     

Thermal stability of shear-induced precursor structures in isotactic polypropylene by rheo-X-ray techniques with couette flow geometry

Combined in situ rheo-SAXS (small-angle X-ray scattering) and -WAXD (wide-angle X-ray diffraction) studies using couette flow geometry were carried out to probe thermal stabilty of shear-induced oriented precursor structure in isotactic polypropylene (iPP) at around its normal melting point (162 °C). Although SAXS results corroborated the emerging consensus about the formation of “long-living” metastable mesomorphic precursor structures in sheared iPP melts, these are the first quantitative measures of the limiting temperature at which no oriented structures survive. At the applied shear, rate = 60 s⁻¹ and duration t_s = 5 s, the oriented iPP structures survived a temperature of 185 °C for 1 h after shear, while no stable structures were detected at and above 195 °C. Following Keller's concepts of chain orientation in flow, it is proposed that the chains with highly oriented high molecular weight fraction are primarily responsible for their stability at high temperatures. Furthermore, the effects of flow condition, specifically the shear temperature, on the distributions of oriented and unoriented crystals were determined from rheo-WAXD results. As expected, at a constant flow intensity (i.e., rate = 30 s⁻¹ and duration, t_s = 5 s), the oriented crystal fraction decreased with the increase in temperature above 155 °C, below which the oriented fraction decreased with the decrease in temperature. As a result, a crystallinty “phase” diagram, i.e., temperature versus crystal fraction ratio, exhibited a peculiar “hourglass” shape, similar to that found in many two-phase polymer–polymer blends. This can be explained by the competition between the oriented and unoriented crystals in the available crystallizable species. Below the shear temperature (155 °C), the unoriented crystals crystallized so rapidly that they overwhelmed the crystallization of the oriented crystals, thus depleting a major portion of the crystallizable species and increasing their contribution in the final total crystalline phase. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3553–3570, 2006