OPTIMAL HARVESTING POLICY FOR INSHORE-OFFSHORE FISHERY MODEL WITH IMPULSIVE DIFFUSION

This article studies the inshore-offshore fishery model with impulsive diffusion. The existence and global asymptotic stability of both the trivial periodic solution and the positive periodic solution are obtained. The complexity of this system is also analyzed. Moreover, the optimal harvesting policy are given for the inshore subpopulation, which includes the maximum sustainable yield and the corresponding harvesting effort.     

A cellular automaton technique for modelling of a binary dendritic growth with convection

A two-dimensional model for the simulation of a binary dendritic growth with convection has been developed in order to investigate the effects of convection on dendritic morphologies. The model is based on a cellular automaton (CA) technique for the calculation of the evolution of solid/liquid (s/l) interface. The dynamics of the interface controlled by temperature, solute diffusion and Gibbs–Thomson effects, is coupled with the continuum model for energy, solute and momentum transfer with liquid convection. The solid fraction is calculated by a governing equation, instead of some approximate methods such as lever rule method [A. Jacot, M. Rappaz, Acta Mater. 50 (2002) 1909–1926.] or interface velocity method [L. Nastac, Acta Mater. 47 (1999) 4253; L. Beltran-Sanchez, D.M. Stefanescu, Mat. and Mat. Trans. A 26 (2003) 367.]. For the dendritic growth without convection, mesh independency of simulation results is achieved. The simulated steady-state tip velocity are compared with the predicted values of LGK theory [Lipton, M.E. Glicksmanm, W. Kurz, Metall. Trans. 18(A) (1987) 341.] as a function of melt undercooling, which shows good agreement. The growth of dendrite arms in a forced convection has been investigated. It was found that the dendritic growth in the upstream direction was amplified, due to larger solute gradient in the liquid ahead of the s/l interface caused by melt convection. In the isothermal environment, the calculated results under very fine mesh are in good agreement with the Oseen–Ivanstov solution for the concentration-driven growth in a forced flow.     

一类二元相关威布尔分布的可靠性问题

本文考虑生存函数为${\ol{F}(x_{1},x_{2})}=\exp\{-[(x_{1}^{1/\alpha}/\theta_{1})^{1/\delta}+(x_{2}^{1/\alpha}/\theta_{2})^{1/\delta}]^{\delta}\},\;x_{i}>0,\;\alpha>0$, $1\geq\delta>0,\;\theta_{i}>0\;(i=1,2)$的二元威布尔分布的两种可靠性问题, 提出可靠度$\pr$的估计并讨论了它们的渐近性, 最后还作了模拟计算.     

Crystal dissolution kinetics and Gibbs free energy

The dependence of dissolution rates on the difference of Gibbs free energy is of critical importance for our understanding of crystal dissolution, reactive flow models and their applications to a variety of environmentally related problems. Here, we review experimental data generated with mineral powders and single crystals to develop a better understanding of apparent inconsistencies between otherwise internally consistent data sets. Additional information from direct surface observations and measurements with vertical scanning interferometry (VSI) and atomic force microscopy (AFM) of albite dissolution at 25, 150 and 185 °C may shed new light on this old but unsolved question. Our discussion is based on the importance of etch pit development, its ΔG dependence, and the pits’ role as a source for steps and step movement in the dissolution process. Results indicate that reaction history may be of critical importance in determining the overall reaction mechanism and its rate. Different rates are observed for systems having otherwise identical ΔG_r acquired from increasing versus decreasing disequilibrium positions.

In this context, we finally discuss the validity of the common application of transition state theory (TST) to elementary and overall reactions governing the dissolution process. In this discussion of crystal dissolution, we contrast TST applications with a stochastic, many-body treatment that has led to the development of a stepwave model. This discussion also focuses on the controversy caused by the rivalry between surface adsorption models and a probabilistic model that seeks to incorporate the full three-dimensional crystal structure.     

A Bayesian analysis for the seismic data on Taiwan

A Bayesian approach is used to analyze the seismic events with magnitudes at least 4.7 on Taiwan. Following the idea proposed by Ogata (1988,Journal of the American Statistical Association,83, 9–27), an epidemic model for the process of occurrence times given the observed magnitude values is considered, incorporated with gamma prior distributions for the parameters in the model, while the hyper-parameters of the prior are essentially determined by the seismic data in an earlier period. Bayesian inference is made on the conditional intensity function via Markov chain Monte Carlo method. The results yield acceptable accuracies in predicting large earthquake events within short time periods.     

森林发展系统的一个非线性半离散模型

本文建立了森林发展系统的一类非线性林龄面积结构的半离散模型 ,并讨论了半离散系统解的存在唯一性 ,给出了线性半离散系统稳定的一些充分条件     

Fermi, Majorana and the Statistical Model of Atoms

We give an account of the appearance and first developments of the statistical model of atoms proposed by Thomas and Fermi, focusing on the main results achieved by Fermi and his group in Rome. Particular attention is addressed to the unknown contribution to this subject by Majorana, anticipating some important results reached later by leading physicists.     

Solid phase extraction for analysis of biogenic carbonates by electrothermal vaporization inductively coupled plasma mass spectrometry (ETV-ICP-MS): an investigation of rare earth element signatures in otolith microchemistry

Uptake of trace elements into fish otoliths is governed by several factors such as life histories and environment in addition to stock and species differences. In an attempt to elucidate the elemental signatures of rare earth elements (REEs) in otoliths, a solid phase extraction (SPE) protocol was used in combination with electrothermal vaporization (ETV) as a sample introduction procedure for the determinations by inductively coupled plasma quadrupole mass spectrometry (ICP-MS). Effects of various parameters, such as carrier gas flow rate, atomization temperature and chemical modification, were examined for optimization of the conditions by ETV-ICP-MS. Atomization was achieved at 2800 °C. Lower temperatures (i.e. 2600 °C) resulted in severe memory problems due to incomplete atomization. Palladium was used as a chemical modifier. It was found that an increase in Pd concentration up to 0.5 μg in the injection volume (70 μl) led up to four-fold enhancement in the integrated signals. This phenomenon is attributed to the carrier effect of Pd rather than the stabilization since no significant losses were observed for high temperature drying around 700 °C even in the absence of Pd. Preconcentration was performed on-line at pH 5 by using a mini-column of Toyopearl AF-Chelate 650M chelating resin, which also eliminated the calcium matrix of otolith solutions. After preconcentration of 6.4 ml of solution, the concentrate was collected in 0.65 ml of 0.5% (v/v) HNO₃ in autosampler cups, and then analyzed by ETV-ICP-MS. The method was validated with the analysis of a fish otolith certified reference material (CRM) of emperor snapper, and then applied to samples. Results obtained from otoliths of fish captured in the same habitat indicated that otolith rare earth element concentrations are more dependent on environmental conditions of the habitat than on species differences.     

Dirac Fields in 3D de Sitter Spacetime

We show that the Dirac equation is separable in the circularly symmetric metric in three dimensions and when the background spacetime is de Sitter we find exact solutions to the radial equations. Using these results we show that the de Sitter horizon has a cross section equal to zero for the massless Dirac field, as in the case of the scalar field. Also, using the improved brick wall model we calculate the fermionic entropy associated with the de Sitter horizon and we compare it with some results previously published.     

地源热泵的运行特性模拟研究

依据圆柱源理论,建立起了耦合地面热泵机组和地下埋管换热器特性的模拟模型,该模型可用于长期运行的地源热泵系统的短时间步长运行特性模拟。探讨了模拟过程中有关参数的确定方法,并运用所建模型对地源热泵的冬季和夏季运行特性进行了模拟。运行特性模拟与实验数据的验证结果表明,所建模型可以对地源热泵的运行特性做出符合实际的预测。