聚合物二元体系动态力学性能的估算

动态热机械分析是多相聚合物体系的一个重要研究手段.分析动态力学性能可以研究共混高聚物的相容性、复合材料的界面特性以及高分子运动机理等.本文综述了聚合物二元体系,即填充、纤维增强、共混体系动态力学性能的估算方法.在填充体系中,分别概述有无界面作用两种情况,当存在界面作用时,界面作用越强,模量越大,阻尼越小.对纤维增强体系,讨论了玻璃纤维有无取向的情况下模量和阻尼的估算.特别对于聚合物二元共混体系,分"海-岛"结构和双连续相两种情况,分别讨论了模量与阻尼的估算.     

高阶常微分方程的动态演化建模

提出了采用高阶常微分方程模型代替传统时序分析中所用的ARMA模型来实现一维时间序列的建模和预报．设计的将遗传程序设计与遗传算法相嵌套的动态演化建模算法,用遗传程序设计优化模型结构,以遗传算法优化模型参数,边收集数据边建模边预报,首次成功地实现了时间序列实时预报的程序自动化．两个时间序列的应用实例表明采用此算法可获得较好的实时预报效果．     

Peakon Solutions to Supersymmetric Camassa-Holm Equation and Degasperis-Procesi Equation

In this paper,the supersymmetric Camassa-Holm equation and Degasperis-Procesi equation are derived from a general superfield equations by choosing different parameters.Their peakon-type solutions are shown in weak sense.At the same time,the dynamic behaviors are analyzed particularly when the two peakons collide elastically,and some results are compared with each other between the two equations.     

单向悬挂屋盖结构的风致气弹耦合效应数值模拟

综合运用计算流体力学和计算结构力学技术,建立了适用于索膜结构流固耦合风振分析的CFD数值模拟方法,并编制了相应的有限元计算程序。应用该程序对具有不同参数的大跨度单向屋盖结构进行了风振响应分析,探讨了来流风速、屋面质量和初始预张力等参数对结构流固耦合特性的影响。研究表明,由于屋盖前缘周期脱落的大尺度旋涡是诱导结构振动的主要原因,随着大尺度旋涡沿屋面向下游移动,其动能逐渐转化为结构变形能,使结构振动形态呈现明显的涡激振动特征。屋面质量、来流风速和初始预张力是影响结构流固耦合性能的主要参数。对于索膜结构,仅通过刚性模型来确定结构风压并进行风振响应分析,其结果是不可靠的。     

上海光源储存环磁聚焦结构设计

上海光源是一台正在建设中的低发射度第三代同步辐射光源. 经过优化后, 储存环有两种直线节长度, 周长432m,在能量3.5GeV下束流发射度为3.9nm.rad, 直线节处的β函数和色散函数有足够的调节范围. 跟踪研究表明, 即使带上磁铁高阶场误差, 储存环仍有足够大的动力学孔径和能量接受度.     

Effect of H impurity on misfit dislocation in Ni-based single-crystal superalloy： molecular dynamic simulations

The effect of H impurity on the misfit dislocation in Ni-based single-crystal superalloy is investigated using the molecular dynamic simulation.It includes the site preferences of H impurity in single crystals Ni and Ni 3 Al,the interaction between H impurity and the misfit dislocation and the effect of H impurity on the moving misfit dislocation.The calculated energies and simulation results show that the misfit dislocation attracts H impurity which is located at the γ/γˊinterface and Ni₃ Al and H impurity on the glide plane can obstruct the glide of misfit dislocation,which is beneficial to improving the mechanical properties of Ni based superalloys.     

Computer simulation of some dynamical properties of the Lorentz gas

We carried out molecular dynamics simulations of a Lorentz gas, consisting of a lone hydrogen molecule moving in a sea of stationary argon atoms. A Lennard-Jones form was assumed for the H₂-Ar potential. The calculations were performed at a reduced temperatureK ^* =kT/_{H 2–Ar} = 4.64 and at reduced densities ^*= _{Ar Ar} ³ in the range 0.074–0.414. The placement of Ar atoms was assumed to be random rather than dictated by equilibrium considerations. We followed the trajectories of many H₂ molecules, each of which is assigned in turn a velocity given by the Maxwell-Boltzmann distribution at the temperature of the simulation. Solving the equations of motion classically, we obtained the translational part of the incoherent dynamic structure factor for the H₂ molecule,S _tr(q, ). This was convoluted with the rotational structure factorS _rot(q, ) calculated assuming unhindered rotation to obtain the total structure factorS(q, ). Our results agree well with experimental data on this function obtained by Egelstaffet al. At the highest density ( ^*=0.414) we studied the dependence ofS(q, ) on system size (number of Ar atoms), number of H₂ molecules for which trajectories are generated, and the length of time over which these trajectories are followed.     

基于异构双核的磁共振接收机的设计

提出了基于异构双核的低场核磁共振（Low-field Nuclear Magnetic Resonance,low-field NMR）接收机的设计,具有ARM（Adanced RISC Machines）和现场可编程门阵列（Field Programmable Gate Array,FPGA）先进的异构双核结构、高速的模数转换器（Analog to Digital Converter,ADC）采集、增益的可控以及可视化显示等特性,提高了整个系统的性能指标.设计中采用Xilinx公司的系统开发工具System Generator来实现内部信号处理功能.实验结果表明,数字接收机具有结构紧凑、可重构性强、采样速率高和成本低等特点,并且增益的可控使接收机获得了较大的动态范围,提高了重建图像的信噪比（Signal-to-Noise Ratio,SNR）.     

继电器动态过程中动态参数的测试方法

本文介绍了一种测试继电器在动态过程中动态参数测试的方法。采用此方法能直接测量和观察继电器动态过程中的线圈电压、电流 ,同时可测出继电器的动作时间 ,还可了解其接点在接触过程是否有振动现象存在。所以 ,此方法是一种多用途的继电器动态参数测量方法     

Real-Time Reconfigurable Interconnections for Parallel Optical Processing

In this letter we describe the advantages of a dynamic optical interconnection system for parallel information processing applications. The system is based on a liquid crystal television which acts as a binary phase-only spatial light modulator. We describe example algorithms where reconfigurable interconnects would be useful and present results of several interconnection topologies which have been implemented.Presented at the International Commission for Optics Topical Meeting, Kyoto, 1994.