混合染料荧光选择性增强受激拉曼散射Stokes波

报道用不同混合比的罗丹明6G(R6G)和罗丹明B(RB)混合染料荧光选择性放大CCl₄和苯的受激拉曼散射不同阶次Stokes波。CCl₄二至五阶Stokes波分别被混合摩尔比为20∶2,20∶13及20∶40(R6g∶RB)的R6G和RB的混合染料荧光放大;一阶Stokes波强度被混合溶液削弱。这是由于到二至五阶Stokes波分别位于以上三种混合溶液荧光峰附近,并且都远离了R6G和RB的吸收峰,混合溶液的荧光增强作用大于吸收作用,因此这几阶Stokes被混合溶液荧光放大。而CCl₄的一阶Stokes位于RB吸收峰附近,又远离各混合溶液荧光峰,溶液的吸收作用大于荧光增强作用,导致一阶Stokes被混合溶液削弱。文章还报道了苯的一、二和三阶Stokes波分别被不同混合比的R6G和DCM的混合乙醇溶液放大,并预测了该方法应用前景。     

State-crossing from a Locally Excited to an Electron Transfer State(SLEET) Model Rationalizing the Aggregation-induced Emission Mechanism of (Bi)piperidylanthracenes

Luminogens with aggregation-induced emission(AIE)characteristics(or AIEgens)have been widely used in various applications due to their excellent luminescent properties in molecular aggregates and the solid state.A deep understanding of the AIE mechanism is critical for the rational development of AIEgens.In this work,the“state-crossing from a locally excited to an electron transfer state”(SLEET)model is employed to rationalize the AIE phenomenon of two(bi)piperidylanthracenes.According to the SLEET model,an electron transfer(ET)state is formed along with the rotation of the piperidyl group in the excited state of(bi)piperidylan-thracene monomers,leading to fluorescence quenching.In contrast,a bright state exists in the crystal and molecular aggregates of these compounds,as the intermolecular interactions restrict the formation of the dark ET state.This mechanistic understanding could inspire the deployment of the SLEET model in the rational designs of various functional AIEgens.     

染料敏化太阳能电池载流子传输的数值模拟

由于在染料敏化太阳能电池(dye-sensitized solar cell, DSSC)中存在染料弛豫、半导体薄膜中电子与氧化态染料分子发生反应和电子在电解质中与氧化态离子复合等不利反应,利用一个更完善的DSSC载流子传输模型对电池的光电性能进行模拟就显得非常重要。为此,本文基于由多重俘获理论建立的DSSC中的包括电子、染料阳离子、碘化物和三碘化物在内的载流子传输模型,数值模拟得到了不同TiO₂薄膜厚度、不同入射光强度与不同染料分子吸收系数下DSSC的J-V曲线。结果表明,随着TiO₂薄膜厚度的增加,太阳能电池的短路电流密度增大,开路电压减小,光电转换效率先增大后减小。当DSSC的TiO₂薄膜厚度为20 μm时,光电转换效率达到最大值7.41%,同时光电转换效率随入射光强度与染料分子吸收系数的增大均有一定程度提高,其中在吸收系数为4 500 cm^-1时,光电转换效率为6.73%。以上结果可以为改进DSSC的光电性能提供理论指导。     

染料掺杂聚合物电注入发光材料的激发态稳定性

染料掺杂聚合物电注入发光材料的激发态稳定性田文晶,马於光,吴英,薛善华,刘式墉,沈家骢（吉林大学分子光谱与分子结构开放实验室、集成光电子学国家重点联合实验室,长春,１３００２３）关键词染料掺杂聚合物,电注入发光,荧光光谱,ＵＶ－Ｖｉｓ吸收谱自英国剑桥...     

光致变色冠醚部花菁染料的合成及其逆光致变色性

作者用含冠醚结构单元的2-甲基-苯并噻唑季铵盐与取代水物醛缩合得到了五个光致变色冠醚部化菁化合物。这些新的冠醚化合物具有逆光致变色性质, 较稳定的结构是开环部花菁式。     

一种近红外花菁染料的合成及其应用于生物大分子的测定

光谱性质;蛋白质;核酸测定;一种近红外花菁染料的合成及其应用于生物大分子的测定     

一种新型磺酸修饰的共价有机框架用于二氧化碳吸收和染料吸附

环境污染是地球现今的重要问题之一,而其中就包括水污染与温室效应.共价有机框架(covalent organic frame-works,COFs)作为一种新兴的晶态多孔聚合物,因其优异的吸附性能,在污染治理领域具有广阔的应用前景.本工作报道了一种基于β-酮胺单体通过迈克尔加成-消除反应合成的磺酸型微孔COF (JUC-...     

Porous multicomponent chitosan/poly(ε-caprolactone)-block poly (ethylene glycol)/SiO2 aerogel@polydopamine membrane for Congo red adsorption

A composite adsorbent, chitosan//poly (ε-caprolactone)-block poly (ethylene glycol)/SiO₂ aerogel@polydopamine (CS/PCL-b-PEG/SA@PDA) membrane was prepared for the adsorption of organic dyes. The matrix polymer materials of this novel adsorbent were eco-friendly. SiO₂ aerogel with nanoporous network construction was fixed in the multicomponent polymer fibers through simultaneous electrospinning-electrospray technology followed by modification of polydopamine (PDA). The composite adsorbent had a maximum adsorption capacity of 598.8 mg/g for Congo red (CR) and possessed good reusability performance. This adsorbent showed excellent performance for the selective adsorption of relatively large molecule CR dyes even under high concentration of small molecule methyl orange (MO) dyes or 1 M of salt solution. The adsorption mechanism indicated that the –NH₂ and –OH groups in adsorbent could generate the stronger electrostatic attraction with the –SO₃^- groups in CR. Meanwhile, the sufficient adsorption spaces of the adsorbent were constructed by the porous network structure of SiO₂ aerogel, the accumulation of PDA particles and the porous structure of the multicomponent composite membrane. The work provided a proactive study in designing an adsorbent for the selective adsorption of organic dyes.     

一系列基于混合配体策略构筑的金属有机骨架的合成、结构及性质

通过简单高效的醛酮缩合反应,合成了碱性配体2,6-二（4-吡啶基亚甲基）环己酮（BPCH）,采用3种芳香羧酸配体：对苯二甲酸（H₂TP）、间苯二甲酸（H₂IP）和均苯三甲酸（H₃TMA）,以混合配体策略制备了7例金属有机骨架（MOFs）。用单晶X射线衍射、红外光谱、粉末X射线衍射和热重分析对其进行表征并分析其拓扑结构。MOFs1、2、3均呈现为多样的三维结构,MOFs4~7表现为同构的二维结构。荧光测试结果显示该类化合物对Fe³⁺有较好的荧光猝灭效应,同时对于染料具有一定的吸附能力。     

多孔柿饼状BiOBr光催化剂的简易溶剂热法合成（英文）

以硝酸铋和十六烷基三甲基溴化铵(CTAB)为Bi和Br源,采用聚乙烯吡咯烷酮(PVP)辅助溶剂热法首次成功制备了多孔纳米片聚结的柿饼状溴氧化铋(BiOBr)。通过多种分析技术对分级微米结构BiOBr材料的物化性质进行了表征,并对其在可见光照射下降解亚甲基蓝(MB)的光催化活性进行了评价。结果表明,溶剂热时间和PVP的加入量对产物的颗粒形貌和结晶度有显著影响。当加入0.7 g PVP时,120℃溶剂热处理12 h,可得到多孔纳米片聚结的柿饼状BiOBr样品。多孔柿饼状BiOBr样品的比表面积为4 m2·g^-1,带隙能为2.64 eV,在可见光区具有较强的光吸收性能,具有良好的可见光驱动降解MB的光催化活性和稳定性。我们推断,多孔纳米片聚结的柿饼状BiOBr样品具有优良的可见光催化性能,这与该样品的较高比表面积、多孔结构、低带隙能以及独特的颗粒形貌有关。