Mechanics and morphology of single-walled carbon nanotubes: from graphene to the elastica

Abstract

The elastica is referred to the shape of the curve into which the centreline of a flexible lamina is bent. Hence, single-walled carbon nanotubes (SWCNTs) are treated as the elastica obtained from bending of graphene. The corresponding large deformation accompanies both the material and geometrical non-linearities. The morphology of the free-standing SWCNTs such as the natural angle of twist, bond lengths, tube radius and wall thickness are determined. Moreover, it is shown that the induced self-equilibriated strain field has a remarkable impact on the mechanical behaviour of the nanotube. Utilization of an appropriate non-linear continuum constitutive relation for graphene leads to exact formulation of the governing equations of SWCNTs. Subsequently, through perturbation analysis, the asymptotic solutions of the initial elastic fields for the SWCNTs are presented. By performing ab initio calculations, the components of the fourth and sixth-order elastic moduli tensors in the constitutive model of graphene needed in this study are computed.     

Facile one‐pot method of initiator fixation for surface‐initiated atom transfer radical polymerization on carbon hard spheres

An efficient and novel one‐pot process is developed to immobilize the atom transfer radical polymerization (ATRP) initiators onto the surface of fully pyrolyzed carbon hard spheres (CHSs) via a radical trapping process from the in situ thermal decomposition of bis(bromomethylbenzoyl)peroxide. The CHSs do not require any additional preparative treatment prior to the initiator immobilization. Styrene and methyl methacrylate are polymerized onto initiator‐immobilized CHSs by surface‐initiated atomic transfer radical polymerization (SI‐ATRP). Samples are characterized using Fourier transform infrared, thermogravimetric analysis, scanning electron microscopy, and transmission electron microscopy. These methods of characterization confirmed that all the CHSs are coated with a uniform layer of grafted polymer. This efficient, one‐pot immobilization of ATRP‐initiators represents an exceptionally simple route for the rapid preparation of various polymer‐coated carbon‐based nanomaterials using SI‐ATRP. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3314–3322     

Halocarbons in Antarctic Surface Waters

Abstract

Surface water samples taken during the 1988–89, 1989–90 and 1990–91 Italian expeditions were analyzed for the presence of carbon tetrachloride, trichloroethylene and tetrachloroethylene. The sample analysis was carried out by solvent extraction and capillary GC-ECD-MS determination. The above-mentioned halocarbons were at ng/l level in all water samples investigated.     

Sampling and Analysis of Odorous Compounds in Water Treatment Plants

Abstract

The following analytical method has been used to identify some odorous compounds in the air of the water treatment plant Werdholzli, Zurich: sampling of contaminated air with the help of activated carbon, desorption by the solvents carbon disulphide and methylene chloride, separation of the carbon disulfide extract into a polar and a nonpolar fraction by adsorption column chromatography on silica. Hereafter gaschromatographic analysis of the polar fraction on glass capillary column (Ucon HB 5100); detection and identification were achieved by flame ionisation, thermoionic nitrogen selective detector and computerized mass spectrometry (Finnigan 3200 F, data system 6110).

The results show the presence of sulfur compounds: thiophenes, thiazoles; nitrogen compounds: pyrazines; oxygen compounds: phenols, alcohols and some unsatured hydrocarbons. The malodorous compounds were sulfur and nitrogen compounds in the range of 0.01-0.1 ppm.     

HCSE method for detection of small carbon–carbon couplings and their signs,comparison with SLAP pulse sequence

Performance of homonuclear coupling sign edited (HCSE) experiment applied to detection of signed carbon–carbon couplings is discussed using a set of already measured samples of nine monosubstituted benzenes. It is shown that coupling sign detection is insensitive to the settings of carbon–carbon polarization transfer delays. The HCSE spectra of ten from the total of 43 measured carbon–carbon couplings were considerably influenced by relaxations and proton–proton strong couplings. These effects are quantitatively discussed. The results of HCSE and SLAP experiments are compared. It is shown that the two methods may complement each other in detection of signed carbon–carbon couplings. Copyright © 2013 John Wiley & Sons, Ltd.     

Time-dependent wave-packet approach to the quantum transport of carbon nanotubes with vacancies

We investigate the vacancy effect on the electronic transport properties of the (5,5)-metallic and (5,0)-semiconducting carbon nanotubes using the time-dependent wave-packet approach based on the Kubo-Greenwood formula within the tight-binding approximation. We found that the metallic and semiconducting carbon nanotubes show different electronic transport properties for the states created by vacancies.     

多孔细径微肋管内CO2流动蒸发换热特性的研究

对亚临界二氧化碳在带有微肋的微细通道内的蒸发换热特性进行了实验研究.实验段为长0.6 m,内径1.7 mm的八孔带0.16 mm高微肋的铝制扁管.实验中参数的变化为:蒸发温度1～15 ℃,质量流速100～300 kg/m2s,热流密度1.67～8.33 kW/m2,干度0.1～0.9.实验结果表明,二氧化碳在带有微肋的微细通道中的蒸发换热系数高于其在光滑微细通道内的换热.二氧化碳的流动蒸发换热系数主要受热流密度和蒸发温度的影响,基本上是换热系数随热流密度及蒸发温度的增加而增加,但同时临界干度前移及滞后,而质量流速对换热系数的影响较弱;压力损失随质量流速和热流密度的增加以及蒸发温度的降低而增加.     

A comparative study on the interaction between tin(II) porphyrin and selected group 8B metals for potential application as reduction catalysts

We study the interaction between tin(II) porphyrin (SnPor) with platinum and non-precious Group 8B metals (iron, cobalt and nickel) by density functional theory and discuss the electronic properties of the resulting products. We also model the interaction of the resulting compounds with water where applicable. Our studies indicate that, SnPor-Ni possesses electronic properties similar to SnPor-Pt, suggesting that it may possess similar photocatalytic properties for reduction reactions, such as converting water to hydrogen gas.